* [PATCH 1/2] arm64: dts: ls1088a: add cpu idle support
@ 2017-07-26 7:24 andy.tang
[not found] ` <1501053893-20897-1-git-send-email-andy.tang-3arQi8VN3Tc@public.gmane.org>
0 siblings, 1 reply; 4+ messages in thread
From: andy.tang @ 2017-07-26 7:24 UTC (permalink / raw)
To: shawnguo
Cc: robh+dt, mark.rutland, catalin.marinas, will.deacon, devicetree,
linux-arm-kernel, linux-kernel, Yuantian Tang
From: Yuantian Tang <andy.tang@nxp.com>
ls1088a supports another cpu idle state which is ph20 which saves
more power when cpu is idle.
It was implemented through psci firmware.
Signed-off-by: Tang Yuantian <andy.tang@nxp.com>
---
arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi | 22 ++++++++++++++++++++++
1 file changed, 22 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
index c144d06..adc1ff5 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
@@ -62,6 +62,7 @@
compatible = "arm,cortex-a53";
reg = <0x0>;
clocks = <&clockgen 1 0>;
+ cpu-idle-states = <&CPU_PH20>;
#cooling-cells = <2>;
};
@@ -70,6 +71,7 @@
compatible = "arm,cortex-a53";
reg = <0x1>;
clocks = <&clockgen 1 0>;
+ cpu-idle-states = <&CPU_PH20>;
};
cpu2: cpu@2 {
@@ -77,6 +79,7 @@
compatible = "arm,cortex-a53";
reg = <0x2>;
clocks = <&clockgen 1 0>;
+ cpu-idle-states = <&CPU_PH20>;
};
cpu3: cpu@3 {
@@ -84,6 +87,7 @@
compatible = "arm,cortex-a53";
reg = <0x3>;
clocks = <&clockgen 1 0>;
+ cpu-idle-states = <&CPU_PH20>;
};
cpu4: cpu@100 {
@@ -91,6 +95,7 @@
compatible = "arm,cortex-a53";
reg = <0x100>;
clocks = <&clockgen 1 1>;
+ cpu-idle-states = <&CPU_PH20>;
#cooling-cells = <2>;
};
@@ -99,6 +104,7 @@
compatible = "arm,cortex-a53";
reg = <0x101>;
clocks = <&clockgen 1 1>;
+ cpu-idle-states = <&CPU_PH20>;
};
cpu6: cpu@102 {
@@ -106,6 +112,7 @@
compatible = "arm,cortex-a53";
reg = <0x102>;
clocks = <&clockgen 1 1>;
+ cpu-idle-states = <&CPU_PH20>;
};
cpu7: cpu@103 {
@@ -113,6 +120,16 @@
compatible = "arm,cortex-a53";
reg = <0x103>;
clocks = <&clockgen 1 1>;
+ cpu-idle-states = <&CPU_PH20>;
+ };
+
+ CPU_PH20: cpu-ph20 {
+ compatible = "arm,idle-state";
+ idle-state-name = "PH20";
+ arm,psci-suspend-param = <0x00010000>;
+ entry-latency-us = <1000>;
+ exit-latency-us = <1000>;
+ min-residency-us = <3000>;
};
};
@@ -136,6 +153,11 @@
<1 10 IRQ_TYPE_LEVEL_LOW>;/* Hypervisor PPI */
};
+ psci {
+ compatible = "arm,psci-0.2";
+ method = "smc";
+ };
+
sysclk: sysclk {
compatible = "fixed-clock";
#clock-cells = <0>;
--
2.1.0.27.g96db324
^ permalink raw reply related [flat|nested] 4+ messages in thread[parent not found: <1501053893-20897-1-git-send-email-andy.tang-3arQi8VN3Tc@public.gmane.org>]
* [PATCH 2/2] arm64: dts: ls2088a: add cpu idle support [not found] ` <1501053893-20897-1-git-send-email-andy.tang-3arQi8VN3Tc@public.gmane.org> @ 2017-07-26 7:24 ` andy.tang-3arQi8VN3Tc [not found] ` <1501053893-20897-2-git-send-email-andy.tang-3arQi8VN3Tc@public.gmane.org> 0 siblings, 1 reply; 4+ messages in thread From: andy.tang-3arQi8VN3Tc @ 2017-07-26 7:24 UTC (permalink / raw) To: shawnguo-DgEjT+Ai2ygdnm+yROfE0A Cc: robh+dt-DgEjT+Ai2ygdnm+yROfE0A, mark.rutland-5wv7dgnIgG8, catalin.marinas-5wv7dgnIgG8, will.deacon-5wv7dgnIgG8, devicetree-u79uwXL29TY76Z2rM5mHXA, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, linux-kernel-u79uwXL29TY76Z2rM5mHXA, Yuantian Tang From: Yuantian Tang <andy.tang-3arQi8VN3Tc@public.gmane.org> ls2088a supports another cpu idle state which is pw20 which saves more power when cpu is idle. It was implemented through psci firmware. Signed-off-by: Tang Yuantian <andy.tang-3arQi8VN3Tc@public.gmane.org> --- arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi | 17 +++++++++++++++++ arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi | 5 +++++ 2 files changed, 22 insertions(+) diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi index 5c695c6..6aa319d 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi @@ -53,6 +53,7 @@ compatible = "arm,cortex-a72"; reg = <0x0>; clocks = <&clockgen 1 0>; + cpu-idle-states = <&CPU_PW20>; next-level-cache = <&cluster0_l2>; #cooling-cells = <2>; }; @@ -62,6 +63,7 @@ compatible = "arm,cortex-a72"; reg = <0x1>; clocks = <&clockgen 1 0>; + cpu-idle-states = <&CPU_PW20>; next-level-cache = <&cluster0_l2>; }; @@ -70,6 +72,7 @@ compatible = "arm,cortex-a72"; reg = <0x100>; clocks = <&clockgen 1 1>; + cpu-idle-states = <&CPU_PW20>; next-level-cache = <&cluster1_l2>; #cooling-cells = <2>; }; @@ -79,6 +82,7 @@ compatible = "arm,cortex-a72"; reg = <0x101>; clocks = <&clockgen 1 1>; + cpu-idle-states = <&CPU_PW20>; next-level-cache = <&cluster1_l2>; }; @@ -88,6 +92,7 @@ reg = <0x200>; clocks = <&clockgen 1 2>; next-level-cache = <&cluster2_l2>; + cpu-idle-states = <&CPU_PW20>; #cooling-cells = <2>; }; @@ -96,6 +101,7 @@ compatible = "arm,cortex-a72"; reg = <0x201>; clocks = <&clockgen 1 2>; + cpu-idle-states = <&CPU_PW20>; next-level-cache = <&cluster2_l2>; }; @@ -104,6 +110,7 @@ compatible = "arm,cortex-a72"; reg = <0x300>; clocks = <&clockgen 1 3>; + cpu-idle-states = <&CPU_PW20>; next-level-cache = <&cluster3_l2>; #cooling-cells = <2>; }; @@ -113,6 +120,7 @@ compatible = "arm,cortex-a72"; reg = <0x301>; clocks = <&clockgen 1 3>; + cpu-idle-states = <&CPU_PW20>; next-level-cache = <&cluster3_l2>; }; @@ -131,6 +139,15 @@ cluster3_l2: l2-cache3 { compatible = "cache"; }; + + CPU_PW20: cpu-pw20 { + compatible = "arm,idle-state"; + idle-state-name = "PW20"; + arm,psci-suspend-param = <0x00010000>; + entry-latency-us = <2000>; + exit-latency-us = <2000>; + min-residency-us = <6000>; + }; }; &pcie1 { diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi index 94cdd30..205b7f7 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi @@ -118,6 +118,11 @@ interrupts = <1 7 0x8>; /* PMU PPI, Level low type */ }; + psci { + compatible = "arm,psci-0.2"; + method = "smc"; + }; + soc { compatible = "simple-bus"; #address-cells = <2>; -- 2.1.0.27.g96db324 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply related [flat|nested] 4+ messages in thread
[parent not found: <1501053893-20897-2-git-send-email-andy.tang-3arQi8VN3Tc@public.gmane.org>]
* Re: [PATCH 2/2] arm64: dts: ls2088a: add cpu idle support [not found] ` <1501053893-20897-2-git-send-email-andy.tang-3arQi8VN3Tc@public.gmane.org> @ 2017-08-03 1:40 ` Shawn Guo 2017-08-03 8:39 ` Andy Tang 0 siblings, 1 reply; 4+ messages in thread From: Shawn Guo @ 2017-08-03 1:40 UTC (permalink / raw) To: andy.tang-3arQi8VN3Tc Cc: mark.rutland-5wv7dgnIgG8, devicetree-u79uwXL29TY76Z2rM5mHXA, catalin.marinas-5wv7dgnIgG8, will.deacon-5wv7dgnIgG8, linux-kernel-u79uwXL29TY76Z2rM5mHXA, robh+dt-DgEjT+Ai2ygdnm+yROfE0A, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r On Wed, Jul 26, 2017 at 03:24:53PM +0800, andy.tang-3arQi8VN3Tc@public.gmane.org wrote: > From: Yuantian Tang <andy.tang-3arQi8VN3Tc@public.gmane.org> > > ls2088a supports another cpu idle state which is pw20 which saves > more power when cpu is idle. > It was implemented through psci firmware. > > Signed-off-by: Tang Yuantian <andy.tang-3arQi8VN3Tc@public.gmane.org> Can you explain a bit in the commit log why psci node is being added in fsl-ls208xa.dtsi while you are only adding idle state for ls2088a? Does that mean ls2088a and ls2080a gets different idle implementation? Shawn > --- > arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi | 17 +++++++++++++++++ > arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi | 5 +++++ > 2 files changed, 22 insertions(+) > > diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi > index 5c695c6..6aa319d 100644 > --- a/arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi > +++ b/arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi > @@ -53,6 +53,7 @@ > compatible = "arm,cortex-a72"; > reg = <0x0>; > clocks = <&clockgen 1 0>; > + cpu-idle-states = <&CPU_PW20>; > next-level-cache = <&cluster0_l2>; > #cooling-cells = <2>; > }; > @@ -62,6 +63,7 @@ > compatible = "arm,cortex-a72"; > reg = <0x1>; > clocks = <&clockgen 1 0>; > + cpu-idle-states = <&CPU_PW20>; > next-level-cache = <&cluster0_l2>; > }; > > @@ -70,6 +72,7 @@ > compatible = "arm,cortex-a72"; > reg = <0x100>; > clocks = <&clockgen 1 1>; > + cpu-idle-states = <&CPU_PW20>; > next-level-cache = <&cluster1_l2>; > #cooling-cells = <2>; > }; > @@ -79,6 +82,7 @@ > compatible = "arm,cortex-a72"; > reg = <0x101>; > clocks = <&clockgen 1 1>; > + cpu-idle-states = <&CPU_PW20>; > next-level-cache = <&cluster1_l2>; > }; > > @@ -88,6 +92,7 @@ > reg = <0x200>; > clocks = <&clockgen 1 2>; > next-level-cache = <&cluster2_l2>; > + cpu-idle-states = <&CPU_PW20>; > #cooling-cells = <2>; > }; > > @@ -96,6 +101,7 @@ > compatible = "arm,cortex-a72"; > reg = <0x201>; > clocks = <&clockgen 1 2>; > + cpu-idle-states = <&CPU_PW20>; > next-level-cache = <&cluster2_l2>; > }; > > @@ -104,6 +110,7 @@ > compatible = "arm,cortex-a72"; > reg = <0x300>; > clocks = <&clockgen 1 3>; > + cpu-idle-states = <&CPU_PW20>; > next-level-cache = <&cluster3_l2>; > #cooling-cells = <2>; > }; > @@ -113,6 +120,7 @@ > compatible = "arm,cortex-a72"; > reg = <0x301>; > clocks = <&clockgen 1 3>; > + cpu-idle-states = <&CPU_PW20>; > next-level-cache = <&cluster3_l2>; > }; > > @@ -131,6 +139,15 @@ > cluster3_l2: l2-cache3 { > compatible = "cache"; > }; > + > + CPU_PW20: cpu-pw20 { > + compatible = "arm,idle-state"; > + idle-state-name = "PW20"; > + arm,psci-suspend-param = <0x00010000>; > + entry-latency-us = <2000>; > + exit-latency-us = <2000>; > + min-residency-us = <6000>; > + }; > }; > > &pcie1 { > diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi > index 94cdd30..205b7f7 100644 > --- a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi > +++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi > @@ -118,6 +118,11 @@ > interrupts = <1 7 0x8>; /* PMU PPI, Level low type */ > }; > > + psci { > + compatible = "arm,psci-0.2"; > + method = "smc"; > + }; > + > soc { > compatible = "simple-bus"; > #address-cells = <2>; > -- > 2.1.0.27.g96db324 > > > _______________________________________________ > linux-arm-kernel mailing list > linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org > http://lists.infradead.org/mailman/listinfo/linux-arm-kernel -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 4+ messages in thread
* RE: [PATCH 2/2] arm64: dts: ls2088a: add cpu idle support 2017-08-03 1:40 ` Shawn Guo @ 2017-08-03 8:39 ` Andy Tang 0 siblings, 0 replies; 4+ messages in thread From: Andy Tang @ 2017-08-03 8:39 UTC (permalink / raw) To: Shawn Guo Cc: mark.rutland@arm.com, devicetree@vger.kernel.org, catalin.marinas@arm.com, will.deacon@arm.com, linux-kernel@vger.kernel.org, robh+dt@kernel.org, linux-arm-kernel@lists.infradead.org Hi Shawn, Please see my explanation inline. > -----Original Message----- > From: Shawn Guo [mailto:shawnguo@kernel.org] > Sent: Thursday, August 03, 2017 9:40 AM > To: Andy Tang <andy.tang@nxp.com> > Cc: mark.rutland@arm.com; devicetree@vger.kernel.org; > catalin.marinas@arm.com; will.deacon@arm.com; linux- > kernel@vger.kernel.org; robh+dt@kernel.org; linux-arm- > kernel@lists.infradead.org > Subject: Re: [PATCH 2/2] arm64: dts: ls2088a: add cpu idle support > > On Wed, Jul 26, 2017 at 03:24:53PM +0800, andy.tang@nxp.com wrote: > > From: Yuantian Tang <andy.tang@nxp.com> > > > > ls2088a supports another cpu idle state which is pw20 which saves more > > power when cpu is idle. > > It was implemented through psci firmware. > > > > Signed-off-by: Tang Yuantian <andy.tang@nxp.com> > > Can you explain a bit in the commit log why psci node is being added in fsl- > ls208xa.dtsi while you are only adding idle state for ls2088a? Does that mean > ls2088a and ls2080a gets different idle implementation? > IDLE implementation is same on both ls2080a and ls2088a. it is just there is no Requirement for ls2080a though. Still it is better to update both. I will resend the patch adding ls2080a supports. Regards, Andy > Shawn > > > --- > > arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi | 17 +++++++++++++++++ > > arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi | 5 +++++ > > 2 files changed, 22 insertions(+) > > > > diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi > > b/arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi > > index 5c695c6..6aa319d 100644 > > --- a/arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi > > +++ b/arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi > > @@ -53,6 +53,7 @@ > > compatible = "arm,cortex-a72"; > > reg = <0x0>; > > clocks = <&clockgen 1 0>; > > + cpu-idle-states = <&CPU_PW20>; > > next-level-cache = <&cluster0_l2>; > > #cooling-cells = <2>; > > }; > > @@ -62,6 +63,7 @@ > > compatible = "arm,cortex-a72"; > > reg = <0x1>; > > clocks = <&clockgen 1 0>; > > + cpu-idle-states = <&CPU_PW20>; > > next-level-cache = <&cluster0_l2>; > > }; > > > > @@ -70,6 +72,7 @@ > > compatible = "arm,cortex-a72"; > > reg = <0x100>; > > clocks = <&clockgen 1 1>; > > + cpu-idle-states = <&CPU_PW20>; > > next-level-cache = <&cluster1_l2>; > > #cooling-cells = <2>; > > }; > > @@ -79,6 +82,7 @@ > > compatible = "arm,cortex-a72"; > > reg = <0x101>; > > clocks = <&clockgen 1 1>; > > + cpu-idle-states = <&CPU_PW20>; > > next-level-cache = <&cluster1_l2>; > > }; > > > > @@ -88,6 +92,7 @@ > > reg = <0x200>; > > clocks = <&clockgen 1 2>; > > next-level-cache = <&cluster2_l2>; > > + cpu-idle-states = <&CPU_PW20>; > > #cooling-cells = <2>; > > }; > > > > @@ -96,6 +101,7 @@ > > compatible = "arm,cortex-a72"; > > reg = <0x201>; > > clocks = <&clockgen 1 2>; > > + cpu-idle-states = <&CPU_PW20>; > > next-level-cache = <&cluster2_l2>; > > }; > > > > @@ -104,6 +110,7 @@ > > compatible = "arm,cortex-a72"; > > reg = <0x300>; > > clocks = <&clockgen 1 3>; > > + cpu-idle-states = <&CPU_PW20>; > > next-level-cache = <&cluster3_l2>; > > #cooling-cells = <2>; > > }; > > @@ -113,6 +120,7 @@ > > compatible = "arm,cortex-a72"; > > reg = <0x301>; > > clocks = <&clockgen 1 3>; > > + cpu-idle-states = <&CPU_PW20>; > > next-level-cache = <&cluster3_l2>; > > }; > > > > @@ -131,6 +139,15 @@ > > cluster3_l2: l2-cache3 { > > compatible = "cache"; > > }; > > + > > + CPU_PW20: cpu-pw20 { > > + compatible = "arm,idle-state"; > > + idle-state-name = "PW20"; > > + arm,psci-suspend-param = <0x00010000>; > > + entry-latency-us = <2000>; > > + exit-latency-us = <2000>; > > + min-residency-us = <6000>; > > + }; > > }; > > > > &pcie1 { > > diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi > > b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi > > index 94cdd30..205b7f7 100644 > > --- a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi > > +++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi > > @@ -118,6 +118,11 @@ > > interrupts = <1 7 0x8>; /* PMU PPI, Level low type */ > > }; > > > > + psci { > > + compatible = "arm,psci-0.2"; > > + method = "smc"; > > + }; > > + > > soc { > > compatible = "simple-bus"; > > #address-cells = <2>; > > -- > > 2.1.0.27.g96db324 > > > > > > _______________________________________________ > > linux-arm-kernel mailing list > > linux-arm-kernel@lists.infradead.org > > http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2017-08-03 8:39 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2017-07-26 7:24 [PATCH 1/2] arm64: dts: ls1088a: add cpu idle support andy.tang
[not found] ` <1501053893-20897-1-git-send-email-andy.tang-3arQi8VN3Tc@public.gmane.org>
2017-07-26 7:24 ` [PATCH 2/2] arm64: dts: ls2088a: " andy.tang-3arQi8VN3Tc
[not found] ` <1501053893-20897-2-git-send-email-andy.tang-3arQi8VN3Tc@public.gmane.org>
2017-08-03 1:40 ` Shawn Guo
2017-08-03 8:39 ` Andy Tang
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).