From mboxrd@z Thu Jan 1 00:00:00 1970 From: Shawn Guo Subject: Re: [PATCH v5 2/8] ARM: dts: TS-4600: add basic device tree Date: Sat, 5 Aug 2017 09:47:55 +0800 Message-ID: <20170805014749.GL31819@dragon> References: <20170714203218.14409-1-sebastien.bourdelin@savoirfairelinux.com> <20170714203218.14409-3-sebastien.bourdelin@savoirfairelinux.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Return-path: Content-Disposition: inline In-Reply-To: <20170714203218.14409-3-sebastien.bourdelin-4ysUXcep3aM1wj+D4I0NRVaTQe2KTcn/@public.gmane.org> Sender: devicetree-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: Sebastien Bourdelin Cc: linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-watchdog-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org, devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, kernel-4ysUXcep3aM1wj+D4I0NRVaTQe2KTcn/@public.gmane.org, robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org, linux-0h96xk9xTtrk1uMJSBkQmQ@public.gmane.org, linus.walleij-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org, fabio.estevam-3arQi8VN3Tc@public.gmane.org, mark-L1vi/lXTdtvnC/t2CciAbw@public.gmane.org, kris-L1vi/lXTdtvnC/t2CciAbw@public.gmane.org List-Id: devicetree@vger.kernel.org On Fri, Jul 14, 2017 at 04:32:12PM -0400, Sebastien Bourdelin wrote: > These device trees add support for the TS-4600 by Technologic Systems. > > More details here: > http://wiki.embeddedarm.com/wiki/TS-4600 > > Signed-off-by: Sebastien Bourdelin > --- > Changes v4 -> v5: > - fix missing signed off > > Changes v3 -> v4: > - rebase on master > > Changes v2 -> v3: > - rebase on master > > Changes v1 -> v2: > - rebase on master > --- > arch/arm/boot/dts/Makefile | 2 + > arch/arm/boot/dts/imx28-ts4600-common.dtsi | 78 ++++++++++++++++++++++++++++++ > arch/arm/boot/dts/imx28-ts4600-rev-a.dts | 22 +++++++++ > arch/arm/boot/dts/imx28-ts4600-rev-b.dts | 22 +++++++++ > 4 files changed, 124 insertions(+) > create mode 100644 arch/arm/boot/dts/imx28-ts4600-common.dtsi > create mode 100644 arch/arm/boot/dts/imx28-ts4600-rev-a.dts > create mode 100644 arch/arm/boot/dts/imx28-ts4600-rev-b.dts > > diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile > index 4b17f35dc9a7..a3c8b7af192b 100644 > --- a/arch/arm/boot/dts/Makefile > +++ b/arch/arm/boot/dts/Makefile > @@ -525,6 +525,8 @@ dtb-$(CONFIG_ARCH_MXS) += \ > imx28-m28cu3.dtb \ > imx28-m28evk.dtb \ > imx28-sps1.dtb \ > + imx28-ts4600-rev-a.dtb \ > + imx28-ts4600-rev-b.dtb \ > imx28-tx28.dtb > dtb-$(CONFIG_ARCH_NOMADIK) += \ > ste-nomadik-s8815.dtb \ > diff --git a/arch/arm/boot/dts/imx28-ts4600-common.dtsi b/arch/arm/boot/dts/imx28-ts4600-common.dtsi > new file mode 100644 > index 000000000000..04bd5a5c0cb4 > --- /dev/null > +++ b/arch/arm/boot/dts/imx28-ts4600-common.dtsi > @@ -0,0 +1,78 @@ > +/* > + * Copyright (C) 2016 Savoir-Faire Linux > + * Author: Sebastien Bourdelin > + * > + * The code contained herein is licensed under the GNU General Public > + * License. You may obtain a copy of the GNU General Public License > + * Version 2 or later at the following locations: > + * > + * http://www.opensource.org/licenses/gpl-license.html > + * http://www.gnu.org/copyleft/gpl.html > + */ > + > +/dts-v1/; > +#include "imx28.dtsi" > +#include "dt-bindings/gpio/gpio.h" > + > +/ { > + > + compatible = "technologic,imx28-ts4600", "fsl,imx28"; > + > + apb@80000000 { > + apbh@80000000 { > + ssp0: ssp@80010000 { > + compatible = "fsl,imx28-mmc"; > + pinctrl-names = "default"; > + pinctrl-0 = <&mmc0_4bit_pins_a > + &mmc0_sck_cfg > + &en_sd_pwr>; > + broken-cd = <1>; > + bus-width = <4>; > + vmmc-supply = <®_vddio_sd0>; > + status = "okay"; > + }; > + > + pinctrl@80018000 { > + pinctrl-names = "default"; This line shouldn't be needed here. > + > + en_sd_pwr: en_sd_pwr { Please have a look at bindings/pinctrl/fsl,mxs-pinctrl.txt. The node without 'reg' property will be treated as a pure configuration rather than pinmux node. You should really have a 'reg' property for it. Also, we prefer to use hyphen than underscore in node name. > + fsl,pinmux-ids = < > + MX28_PAD_PWM3__GPIO_3_28 > + >; > + fsl,drive-strength = ; > + fsl,voltage = ; > + fsl,pull-up = ; > + }; > + > + }; > + }; > + > + apbx@80040000 { > + pwm: pwm@80064000 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pwm2_pins_a>; > + status = "okay"; > + }; > + > + duart: serial@80074000 { > + pinctrl-names = "default"; > + pinctrl-0 = <&duart_pins_a>; > + status = "okay"; > + }; > + }; > + }; > + > + regulators { > + compatible = "simple-bus"; > + > + reg_vddio_sd0: vddio-sd0 { > + compatible = "regulator-fixed"; > + regulator-name = "vddio-sd0"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + regulator-boot-on; > + gpio = <&gpio3 28 0>; Please use the defines in include/dt-bindings/gpio/gpio.h for polarity here? > + }; > + }; We are asked by DT maintainers to put fixed regulator directly under root instead of having a fake bus container node. We prefer to use the following naming schema: reg_xxx: regulator-xxx { ... }; Shawn > + > +}; > diff --git a/arch/arm/boot/dts/imx28-ts4600-rev-a.dts b/arch/arm/boot/dts/imx28-ts4600-rev-a.dts > new file mode 100644 > index 000000000000..e8cb72988fcf > --- /dev/null > +++ b/arch/arm/boot/dts/imx28-ts4600-rev-a.dts > @@ -0,0 +1,22 @@ > +/* > + * Copyright (C) 2016 Savoir-Faire Linux > + * Author: Sebastien Bourdelin > + * > + * The code contained herein is licensed under the GNU General Public > + * License. You may obtain a copy of the GNU General Public License > + * Version 2 or later at the following locations: > + * > + * http://www.opensource.org/licenses/gpl-license.html > + * http://www.gnu.org/copyleft/gpl.html > + */ > + > +#include "imx28-ts4600-common.dtsi" > + > +/ { > + model = "Technologic Systems i.MX28 TS-4600 Rev A"; > + > + memory { > + reg = <0x40000000 0x08000000>; /* 128MB */ > + }; > + > +}; > diff --git a/arch/arm/boot/dts/imx28-ts4600-rev-b.dts b/arch/arm/boot/dts/imx28-ts4600-rev-b.dts > new file mode 100644 > index 000000000000..a115f831fe2b > --- /dev/null > +++ b/arch/arm/boot/dts/imx28-ts4600-rev-b.dts > @@ -0,0 +1,22 @@ > +/* > + * Copyright (C) 2016 Savoir-Faire Linux > + * Author: Sebastien Bourdelin > + * > + * The code contained herein is licensed under the GNU General Public > + * License. You may obtain a copy of the GNU General Public License > + * Version 2 or later at the following locations: > + * > + * http://www.opensource.org/licenses/gpl-license.html > + * http://www.gnu.org/copyleft/gpl.html > + */ > + > +#include "imx28-ts4600-common.dtsi" > + > +/ { > + model = "Technologic Systems i.MX28 TS-4600 Rev B"; > + > + memory { > + reg = <0x40000000 0x10000000>; /* 256MB */ > + }; > + > +}; > -- > 2.13.0 > -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html