From: Corentin Labbe <clabbe.montjoie@gmail.com>
To: robh+dt@kernel.org, mark.rutland@arm.com, linux@armlinux.org.uk,
maxime.ripard@free-electrons.com, wens@csie.org,
peppe.cavallaro@st.com, alexandre.torgue@st.com, andrew@lunn.ch,
f.fainelli@gmail.com
Cc: netdev@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
Corentin Labbe <clabbe.montjoie@gmail.com>
Subject: [PATCH 3/3] net: stmmac: dwmac-sun8i: choose internal PHY via phy-is-integrated
Date: Thu, 10 Aug 2017 10:51:29 +0200 [thread overview]
Message-ID: <20170810085129.20463-4-clabbe.montjoie@gmail.com> (raw)
In-Reply-To: <20170810085129.20463-1-clabbe.montjoie@gmail.com>
The current way to find if the phy is internal is to compare DT phy-mode
and emac_variant/internal_phy.
But it will negate a possible future SoC where an external PHY use the
same phy mode than the internal one.
This patch adds a new way to find if the PHY is internal, via
the phy-is-integrated property.
Since the internal_phy variable does not need anymore to contain the xMII mode
used by the internal PHY, it is still used for knowing the presence of an
internal PHY, so it is modified to a boolean soc_has_internal_phy.
Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
---
drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c | 16 ++++++++--------
1 file changed, 8 insertions(+), 8 deletions(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c
index fffd6d5fc907..672553b652bd 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c
@@ -41,14 +41,14 @@
* This value is used for disabling properly EMAC
* and used as a good starting value in case of the
* boot process(uboot) leave some stuff.
- * @internal_phy: Does the MAC embed an internal PHY
+ * @soc_has_internal_phy: Does the MAC embed an internal PHY
* @support_mii: Does the MAC handle MII
* @support_rmii: Does the MAC handle RMII
* @support_rgmii: Does the MAC handle RGMII
*/
struct emac_variant {
u32 default_syscon_value;
- int internal_phy;
+ bool soc_has_internal_phy;
bool support_mii;
bool support_rmii;
bool support_rgmii;
@@ -75,7 +75,7 @@ struct sunxi_priv_data {
static const struct emac_variant emac_variant_h3 = {
.default_syscon_value = 0x58000,
- .internal_phy = PHY_INTERFACE_MODE_MII,
+ .soc_has_internal_phy = true,
.support_mii = true,
.support_rmii = true,
.support_rgmii = true
@@ -83,20 +83,20 @@ static const struct emac_variant emac_variant_h3 = {
static const struct emac_variant emac_variant_v3s = {
.default_syscon_value = 0x38000,
- .internal_phy = PHY_INTERFACE_MODE_MII,
+ .soc_has_internal_phy = true,
.support_mii = true
};
static const struct emac_variant emac_variant_a83t = {
.default_syscon_value = 0,
- .internal_phy = 0,
+ .soc_has_internal_phy = false,
.support_mii = true,
.support_rgmii = true
};
static const struct emac_variant emac_variant_a64 = {
.default_syscon_value = 0,
- .internal_phy = 0,
+ .soc_has_internal_phy = false,
.support_mii = true,
.support_rmii = true,
.support_rgmii = true
@@ -648,7 +648,7 @@ static int sun8i_dwmac_set_syscon(struct stmmac_priv *priv)
"Current syscon value is not the default %x (expect %x)\n",
val, reg);
- if (gmac->variant->internal_phy) {
+ if (gmac->variant->soc_has_internal_phy) {
if (!gmac->use_internal_phy) {
/* switch to external PHY interface */
reg &= ~H3_EPHY_SELECT;
@@ -932,7 +932,7 @@ static int sun8i_dwmac_probe(struct platform_device *pdev)
}
plat_dat->interface = of_get_phy_mode(dev->of_node);
- if (plat_dat->interface == gmac->variant->internal_phy) {
+ if (of_property_read_bool(plat_dat->phy_node, "phy-is-integrated")) {
dev_info(&pdev->dev, "Will use internal PHY\n");
gmac->use_internal_phy = true;
gmac->ephy_clk = of_clk_get(plat_dat->phy_node, 0);
--
2.13.0
prev parent reply other threads:[~2017-08-10 8:51 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-08-10 8:51 [PATCH 0/3] net: stmmac: Detect PHY location with phy-is-integrated Corentin Labbe
2017-08-10 8:51 ` [PATCH 1/3] Documentation: bindings: Add documentation for phy-is-integrated Corentin Labbe
2017-08-10 8:51 ` [PATCH 2/3] ARM: sun8i: sunxi-h3-h5: add phy-is-integrated property to internal PHY Corentin Labbe
[not found] ` <20170810085129.20463-3-clabbe.montjoie-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2017-08-11 2:42 ` Chen-Yu Tsai
[not found] ` <CAGb2v64dBZgN6-8kHnnN1qiEXHnbXw_FM9WxGHPU0h-tZDbspA-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2017-08-11 8:05 ` Corentin Labbe
2017-08-11 8:11 ` Chen-Yu Tsai
[not found] ` <CAGb2v66wCRe8nFucJa5nAT1GhO75LmCyfNWQQbwxzh085Zwk+w-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2017-08-11 8:19 ` Corentin Labbe
2017-08-11 8:22 ` Chen-Yu Tsai
[not found] ` <CAGb2v66SGAKnFoHNqWR+DqS-mY3KA853NmKpdHqf8huOkisLKg-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2017-08-11 8:39 ` Corentin Labbe
2017-08-11 13:25 ` Corentin Labbe
2017-08-11 15:03 ` Florian Fainelli
[not found] ` <302496B2-46F1-456D-A9A0-8257B5582695-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2017-08-16 9:12 ` Corentin Labbe
2017-08-17 15:10 ` Rob Herring
2017-08-10 8:51 ` Corentin Labbe [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170810085129.20463-4-clabbe.montjoie@gmail.com \
--to=clabbe.montjoie@gmail.com \
--cc=alexandre.torgue@st.com \
--cc=andrew@lunn.ch \
--cc=devicetree@vger.kernel.org \
--cc=f.fainelli@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=mark.rutland@arm.com \
--cc=maxime.ripard@free-electrons.com \
--cc=netdev@vger.kernel.org \
--cc=peppe.cavallaro@st.com \
--cc=robh+dt@kernel.org \
--cc=wens@csie.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).