Re: [PATCH v4 00/20] Add QCOM QPIC NAND support

[Boris Brezillon <boris.brezillon-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>]

Le Fri, 11 Aug 2017 17:09:15 +0530,
Abhishek Sahu <absahu-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org> a écrit :

> * v4:
> 
> 1. Added Acked-by from Rob for DT documentation patches
> 2. Removed ipq8074 compatible string from ipq4019 DT example.
> 2. Used the BIT macro for NAND_CMD_VLD bits and consistent names
>    as suggested by Boris in v3.
> 
> * v3:
> 
> 1. Removed the patches already applied to linux-next and
>    rebased the remaining patches on [1]
> 2. Reordered the patches and put the BAM DMA changes [2]
>    dependent patches and compatible string patches in last
> 3. Removed the register offsets array and used the dev_cmd offsets
> 4. Changed some macro names to small letters for better code readability
> 5. Changed the compatible string to SoC specific
> 6. Did minor code changes for adding comment, error handling, structure names
> 7. Combined raw write (patch#18) and passing flag parameter (patch#22) patch
>    into one
> 8. Made separate patch for compatible string and NAND properties
> 9. Made separate patch for BAM command descriptor and data descriptors handling
> 10. Changed commit message for some of the patches
> 11. Addressed review comments given in v2
> 12. Added Reviewed-by of Archit for some of the patches from v2
> 13. All the MTD tests are working fine for IPQ8064 AP148, IPQ4019 DK04 and
>     IPQ8074 HK01 boards for v3 patches
> 
> [1] http://git.infradead.org/l2-mtd.git/shortlog/refs/heads/nand/next
> [2] http://www.spinics.net/lists/dmaengine/msg13662.html
> 
> * v2:
> 
> 1. Addressed the review comments given in v1
> 2. Removed the DMA coherent buffer for register read and used
>    streaming DMA API’s
> 3. Reorganized the NAND read and write functions
> 4. Separated patch for driver and documentation changes
> 5. Changed the compatible string for EBI2
> 
> * v1:
> 
> http://www.spinics.net/lists/devicetree/msg183706.html
> 
> Abhishek Sahu (20):
>   mtd: nand: qcom: fix read failure without complete bootchain
>   mtd: nand: qcom: support for NAND controller properties
>   mtd: nand: qcom: add bam property for QPIC NAND controller
>   mtd: nand: qcom: add and initialize QPIC DMA resources

Applied patches 1 to 4. Still waiting a bit to let Archit review the
remaining ones.

Regards,

Boris

>   mtd: nand: qcom: DMA mapping support for register read buffer
>   mtd: nand: qcom: allocate BAM transaction
>   mtd: nand: qcom: add BAM DMA descriptor handling
>   mtd: nand: qcom: support for passing flags in transfer functions
>   mtd: nand: qcom: support for read location registers
>   mtd: nand: qcom: erased codeword detection configuration
>   mtd: nand: qcom: enable BAM or ADM mode
>   mtd: nand: qcom: QPIC data descriptors handling
>   mtd: nand: qcom: support for different DEV_CMD register offsets
>   mtd: nand: qcom: add command elements in BAM transaction
>   mtd: nand: qcom: support for command descriptor formation
>   dt-bindings: qcom_nandc: fix the ipq806x device tree example
>   dt-bindings: qcom_nandc: IPQ4019 QPIC NAND documentation
>   dt-bindings: qcom_nandc: IPQ8074 QPIC NAND documentation
>   mtd: nand: qcom: support for IPQ4019 QPIC NAND controller
>   mtd: nand: qcom: support for IPQ8074 QPIC NAND controller
> 
>  .../devicetree/bindings/mtd/qcom_nandc.txt         |  63 +-
>  drivers/mtd/nand/qcom_nandc.c                      | 866 ++++++++++++++++++---
>  2 files changed, 814 insertions(+), 115 deletions(-)
> 

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html