From: Shawn Guo <shawnguo-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
To: Ashish Kumar <Ashish.Kumar-3arQi8VN3Tc@public.gmane.org>
Cc: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
leoyang.li-3arQi8VN3Tc@public.gmane.org,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
Amrita Kumari <amrita.kumari-3arQi8VN3Tc@public.gmane.org>
Subject: Re: [RESEND] arm64: dts: ls1088a: Added dcfg node in ls1088a dtsi
Date: Mon, 14 Aug 2017 09:37:50 +0800 [thread overview]
Message-ID: <20170814013748.GG31819@dragon> (raw)
In-Reply-To: <1502443177-15479-1-git-send-email-Ashish.Kumar-3arQi8VN3Tc@public.gmane.org>
On Fri, Aug 11, 2017 at 02:49:36PM +0530, Ashish Kumar wrote:
> Add debug configuration node(DCFG) in dtsi, helps guts driver to
> print the following information in kernel boot log
>
> [ 0.526649] Machine: LS1088A RDB Board
> [ 0.530430] SoC family: QorIQ LS1088A
> [ 0.534115] SoC ID: svr:0x87030010, Revision: 1.0
>
> Signed-off-by: Amrita Kumari <amrita.kumari-3arQi8VN3Tc@public.gmane.org>
> Signed-off-by: Ashish Kumar <Ashish.Kumar-3arQi8VN3Tc@public.gmane.org>
Why resend?
> ---
> arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi | 6 ++++++
> drivers/soc/fsl/guts.c | 1 +
Do not mix driver code with dts changes. Instead, they should be
separate patches going through different subsystem tree and maintainers.
Send me dts patch only after driver counterpart lands on mainline.
Shawn
> 2 files changed, 7 insertions(+), 0 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
> index c144d06..b5f2372 100644
> --- a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
> +++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
> @@ -156,6 +156,12 @@
> clocks = <&sysclk>;
> };
>
> + dcfg: dcfg@1e00000 {
> + compatible = "fsl,ls1088a-dcfg", "syscon";
> + reg = <0x0 0x1e00000 0x0 0x10000>;
> + little-endian;
> + };
> +
> tmu: tmu@1f80000 {
> compatible = "fsl,qoriq-tmu";
> reg = <0x0 0x1f80000 0x0 0x10000>;
> diff --git a/drivers/soc/fsl/guts.c b/drivers/soc/fsl/guts.c
> index 6af7a11..d89a6a8 100644
> --- a/drivers/soc/fsl/guts.c
> +++ b/drivers/soc/fsl/guts.c
> @@ -213,6 +213,7 @@ static int fsl_guts_remove(struct platform_device *dev)
> { .compatible = "fsl,ls1021a-dcfg", },
> { .compatible = "fsl,ls1043a-dcfg", },
> { .compatible = "fsl,ls2080a-dcfg", },
> + { .compatible = "fsl,ls1088a-dcfg", },
> {}
> };
> MODULE_DEVICE_TABLE(of, fsl_guts_of_match);
> --
> 1.7.6.GIT
>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
prev parent reply other threads:[~2017-08-14 1:37 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-08-11 9:19 [RESEND] arm64: dts: ls1088a: Added dcfg node in ls1088a dtsi Ashish Kumar
[not found] ` <1502443177-15479-1-git-send-email-Ashish.Kumar-3arQi8VN3Tc@public.gmane.org>
2017-08-11 9:19 ` [RESEND] arm64: dts: ls1088: Correction in Board name from "L1088A" to "LS1088A" Ashish Kumar
2017-08-14 1:37 ` Shawn Guo [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170814013748.GG31819@dragon \
--to=shawnguo-dgejt+ai2ygdnm+yrofe0a@public.gmane.org \
--cc=Ashish.Kumar-3arQi8VN3Tc@public.gmane.org \
--cc=amrita.kumari-3arQi8VN3Tc@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=leoyang.li-3arQi8VN3Tc@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).