Re: [PATCH 2/5] iio: st_sensors: do not always write enable_axis register

[Jonathan Cameron <jic23-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>]

On Wed, 16 Aug 2017 21:13:13 +0200
Lorenzo Bianconi <lorenzo.bianconi83-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> wrote:

> New devices (e.g. LIS2DW12) enable all axis by default and do not export
> that capability in register map. Check if the enable_axis register
> address has been declared in st_sensor_settings map in order to verify if
> the driver needs to enable all sensor axis
> 
> Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi-qxv4g6HH51o@public.gmane.org>

Sounds like the software guys have been feeding back what is useful
to the hardware team ;)

Anyhow, patch is fine.  Will pick up in V2.

Jonathan

> ---
>  drivers/iio/common/st_sensors/st_sensors_core.c | 5 ++++-
>  1 file changed, 4 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/iio/common/st_sensors/st_sensors_core.c b/drivers/iio/common/st_sensors/st_sensors_core.c
> index a26217b0604f..6331cc91e02d 100644
> --- a/drivers/iio/common/st_sensors/st_sensors_core.c
> +++ b/drivers/iio/common/st_sensors/st_sensors_core.c
> @@ -221,11 +221,14 @@ EXPORT_SYMBOL(st_sensors_set_enable);
>  int st_sensors_set_axis_enable(struct iio_dev *indio_dev, u8 axis_enable)
>  {
>  	struct st_sensor_data *sdata = iio_priv(indio_dev);
> +	int err = 0;
>  
> -	return st_sensors_write_data_with_mask(indio_dev,
> +	if (sdata->sensor_settings->enable_axis.addr)
> +		err = st_sensors_write_data_with_mask(indio_dev,
>  				sdata->sensor_settings->enable_axis.addr,
>  				sdata->sensor_settings->enable_axis.mask,
>  				axis_enable);
> +	return err;
>  }
>  EXPORT_SYMBOL(st_sensors_set_axis_enable);
>