From: Jeffy Chen <jeffy.chen@rock-chips.com>
To: linux-kernel@vger.kernel.org, bhelgaas@google.com
Cc: shawn.lin@rock-chips.com, briannorris@chromium.org,
dianders@chromium.org, Jeffy Chen <jeffy.chen@rock-chips.com>,
Matthias Kaehlcke <mka@chromium.org>,
devicetree@vger.kernel.org, Heiko Stuebner <heiko@sntech.de>,
Klaus Goger <klaus.goger@theobroma-systems.com>,
linux-rockchip@lists.infradead.org,
Rob Herring <robh+dt@kernel.org>,
linux-arm-kernel@lists.infradead.org,
Will Deacon <will.deacon@arm.com>,
Mark Rutland <mark.rutland@arm.com>,
Caesar Wang <wxt@rock-chips.com>,
Catalin Marinas <catalin.marinas@arm.com>
Subject: [PATCH v3 4/4] arm64: dts: rockchip: Handle pcie wake in pcie driver for Gru
Date: Fri, 18 Aug 2017 16:28:41 +0800 [thread overview]
Message-ID: <20170818082841.22335-5-jeffy.chen@rock-chips.com> (raw)
In-Reply-To: <20170818082841.22335-1-jeffy.chen@rock-chips.com>
Currently we are handling pcie wake irq in mrvl wifi driver.
Move it to rockchip pcie driver for Gru boards.
Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com>
---
Changes in v3: None
Changes in v2: None
arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi | 15 +++++++++------
1 file changed, 9 insertions(+), 6 deletions(-)
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi
index d48e98b62d09..42158512e979 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi
@@ -712,7 +712,15 @@ ap_i2c_audio: &i2c8 {
ep-gpios = <&gpio2 27 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
- pinctrl-0 = <&pcie_clkreqn_cpm>, <&wifi_perst_l>;
+ pinctrl-0 = <&pcie_clkreqn_cpm>, <&wlan_host_wake_l>, <&wifi_perst_l>;
+
+ interrupts-extended = <&gic GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH 0>,
+ <&gic GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH 0>,
+ <&gic GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH 0>,
+ <&gpio0 8 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-names = "sys", "legacy", "client", "wake";
+ /delete-property/ interrupts;
+
vpcie3v3-supply = <&pp3300_wifi_bt>;
vpcie1v8-supply = <&wlan_pd_n>; /* HACK: see &wlan_pd_n */
vpcie0v9-supply = <&pp900_pcie>;
@@ -727,11 +735,6 @@ ap_i2c_audio: &i2c8 {
compatible = "pci1b4b,2b42";
reg = <0x83010000 0x0 0x00000000 0x0 0x00100000
0x83010000 0x0 0x00100000 0x0 0x00100000>;
- interrupt-parent = <&gpio0>;
- interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
- pinctrl-names = "default";
- pinctrl-0 = <&wlan_host_wake_l>;
- wakeup-source;
};
};
};
--
2.11.0
prev parent reply other threads:[~2017-08-18 8:28 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-08-18 8:28 [PATCH v3 0/4] PCI: rockchip: Move PCIE_WAKE handling into rockchip pcie driver Jeffy Chen
[not found] ` <20170818082841.22335-1-jeffy.chen-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
2017-08-18 8:28 ` [PATCH v3 3/4] dt-bindings: PCI: rockchip: Add support for pcie wake irq Jeffy Chen
2017-08-18 8:28 ` Jeffy Chen [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170818082841.22335-5-jeffy.chen@rock-chips.com \
--to=jeffy.chen@rock-chips.com \
--cc=bhelgaas@google.com \
--cc=briannorris@chromium.org \
--cc=catalin.marinas@arm.com \
--cc=devicetree@vger.kernel.org \
--cc=dianders@chromium.org \
--cc=heiko@sntech.de \
--cc=klaus.goger@theobroma-systems.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=mark.rutland@arm.com \
--cc=mka@chromium.org \
--cc=robh+dt@kernel.org \
--cc=shawn.lin@rock-chips.com \
--cc=will.deacon@arm.com \
--cc=wxt@rock-chips.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).