From: Corentin Labbe <clabbe.montjoie@gmail.com>
To: Chen-Yu Tsai <wens@csie.org>
Cc: Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
Russell King <linux@armlinux.org.uk>,
Maxime Ripard <maxime.ripard@free-electrons.com>,
Giuseppe Cavallaro <peppe.cavallaro@st.com>,
Alexandre Torgue <alexandre.torgue@st.com>,
devicetree <devicetree@vger.kernel.org>,
linux-arm-kernel <linux-arm-kernel@lists.infradead.org>,
linux-kernel <linux-kernel@vger.kernel.org>,
netdev <netdev@vger.kernel.org>
Subject: Re: [PATCH v3 3/4] net: stmmac: register parent MDIO node for sun8i-h3-emac
Date: Sat, 19 Aug 2017 20:50:25 +0200 [thread overview]
Message-ID: <20170819185025.GB13266@Red> (raw)
In-Reply-To: <CAGb2v66KcZkiDDHryMmVzm4WroXePPy3V44SLpVdoO3ZEjgC=g@mail.gmail.com>
On Sat, Aug 19, 2017 at 01:05:21AM +0800, Chen-Yu Tsai wrote:
> On Fri, Aug 18, 2017 at 8:21 PM, Corentin Labbe
> <clabbe.montjoie@gmail.com> wrote:
> > In case of a MDIO switch, the registered MDIO node should be
> > the parent of the PHY. Otherwise of_phy_connect will fail.
> >
> > Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
> > ---
> > drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c | 12 ++++++++++--
> > 1 file changed, 10 insertions(+), 2 deletions(-)
> >
> > diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
> > index a366b3747eeb..ca3cc99d8960 100644
> > --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
> > +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
> > @@ -312,10 +312,12 @@ static int stmmac_dt_phy(struct plat_stmmacenet_data *plat,
> > static const struct of_device_id need_mdio_ids[] = {
> > { .compatible = "snps,dwc-qos-ethernet-4.10" },
> > { .compatible = "allwinner,sun8i-a83t-emac" },
> > - { .compatible = "allwinner,sun8i-h3-emac" },
> > { .compatible = "allwinner,sun8i-v3s-emac" },
> > { .compatible = "allwinner,sun50i-a64-emac" },
> > };
> > + static const struct of_device_id need_mdio_mux_ids[] = {
> > + { .compatible = "allwinner,sun8i-h3-emac" },
> > + };
> >
> > /* If phy-handle property is passed from DT, use it as the PHY */
> > plat->phy_node = of_parse_phandle(np, "phy-handle", 0);
> > @@ -332,7 +334,13 @@ static int stmmac_dt_phy(struct plat_stmmacenet_data *plat,
> > mdio = false;
> > }
> >
> > - if (of_match_node(need_mdio_ids, np)) {
> > + /*
> > + * In case of a MDIO switch/mux, the registered MDIO node should be
> > + * the parent of the PHY. Otherwise of_phy_connect will fail.
> > + */
> > + if (of_match_node(need_mdio_mux_ids, np)) {
> > + plat->mdio_node = of_get_parent(plat->phy_node);
>
> Extra space before of_get_parent.
>
> Also this is going to fail horribly if a fixed link is used.
>
Hello
I will add an extra patch for handling fixed-link for both need_mdio_mux_ids/need_mdio_ids cases.
Thanks
Regards
next prev parent reply other threads:[~2017-08-19 18:50 UTC|newest]
Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-08-18 12:21 [PATCH v3 0/4] net: stmmac: Detect PHY location with phy-is-integrated Corentin Labbe
2017-08-18 12:21 ` [PATCH v3 1/4] ARM: dts: sunxi: h3/h5: represent the mdio switch used by sun8i-h3-emac Corentin Labbe
2017-08-18 12:21 ` [PATCH v3 2/4] net: stmmac: dwmac-sun8i: choose internal PHY via phy-is-integrated Corentin Labbe
2017-08-18 16:58 ` Chen-Yu Tsai
2017-08-22 16:40 ` Florian Fainelli
2017-08-18 12:21 ` [PATCH v3 3/4] net: stmmac: register parent MDIO node for sun8i-h3-emac Corentin Labbe
2017-08-18 17:05 ` Chen-Yu Tsai
2017-08-19 18:50 ` Corentin Labbe [this message]
2017-08-19 20:38 ` Andrew Lunn
[not found] ` <20170819203836.GA21567-g2DYL2Zd6BY@public.gmane.org>
2017-08-20 6:57 ` Corentin Labbe
2017-08-20 14:25 ` Andrew Lunn
2017-08-21 8:10 ` Chen-Yu Tsai
2017-08-21 13:20 ` Andrew Lunn
2017-08-21 13:31 ` Maxime Ripard
[not found] ` <20170821133104.qvrhvwin2rdg4aqo-ZC1Zs529Oq4@public.gmane.org>
2017-08-21 14:23 ` Andrew Lunn
2017-08-22 7:59 ` Corentin Labbe
[not found] ` <20170821142321.GE1703-g2DYL2Zd6BY@public.gmane.org>
2017-08-22 15:39 ` Chen-Yu Tsai
[not found] ` <CAGb2v64E4T=1ff3POGuXZA=MvjGAnKQ6OF6A3sT_cU-=jh6zNw-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2017-08-22 16:40 ` Florian Fainelli
2017-08-22 18:11 ` Corentin Labbe
2017-08-22 18:35 ` Florian Fainelli
2017-08-22 19:37 ` Corentin Labbe
2017-08-23 7:49 ` Maxime Ripard
2017-08-23 16:31 ` Florian Fainelli
2017-08-24 8:12 ` Maxime Ripard
2017-08-24 8:21 ` Corentin Labbe
2017-08-24 19:44 ` Corentin Labbe
2017-08-24 19:59 ` Florian Fainelli
2017-08-25 2:54 ` Chen-Yu Tsai
[not found] ` <CAGb2v64jrDPSff+QL_PQBMaQJ+CcTVbskjuOUd1OqR4smbu+ig-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2017-08-25 3:05 ` Florian Fainelli
[not found] ` <77ff97c1-9d0a-8b3f-d0b9-25c951f86fec-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2017-08-25 3:41 ` Chen-Yu Tsai
2017-08-25 3:59 ` Florian Fainelli
2017-08-25 13:26 ` Andrew Lunn
2017-08-22 16:50 ` Maxime Ripard
2017-08-18 12:21 ` [PATCH v3 4/4] dt-bindings: net: dwmac-sun8i: update documentation about integrated PHY Corentin Labbe
2017-08-18 16:57 ` Chen-Yu Tsai
2017-08-19 18:33 ` Corentin Labbe
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170819185025.GB13266@Red \
--to=clabbe.montjoie@gmail.com \
--cc=alexandre.torgue@st.com \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=mark.rutland@arm.com \
--cc=maxime.ripard@free-electrons.com \
--cc=netdev@vger.kernel.org \
--cc=peppe.cavallaro@st.com \
--cc=robh+dt@kernel.org \
--cc=wens@csie.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).