devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Heiko Stuebner <heiko-4mtYJXux2i+zQB+pC5nmwQ@public.gmane.org>
To: lee.jones-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org
Cc: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	Heiko Stuebner <heiko-4mtYJXux2i+zQB+pC5nmwQ@public.gmane.org>,
	Elaine Zhang <zhangqing-TNX95d0MmH7DzftRWevZcw@public.gmane.org>,
	linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	linux-rockchip-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
	chenjh-TNX95d0MmH7DzftRWevZcw@public.gmane.org
Subject: [PATCH v9 RESEND 5/9] mfd: rk808: Add RK805 support
Date: Mon, 21 Aug 2017 03:28:38 +0200	[thread overview]
Message-ID: <20170821012842.17875-6-heiko@sntech.de> (raw)
In-Reply-To: <20170821012842.17875-1-heiko-4mtYJXux2i+zQB+pC5nmwQ@public.gmane.org>

From: Elaine Zhang <zhangqing-TNX95d0MmH7DzftRWevZcw@public.gmane.org>

The RK805 chip is a Power Management IC (PMIC) for multimedia and handheld
devices. It contains the following components:

    - Regulators
    - RTC
    - Clocking

Both RK808 and RK805 chips are using a similar register map,
so we can reuse the RTC and Clocking functionality.

Signed-off-by: Elaine Zhang <zhangqing-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
Signed-off-by: Joseph Chen <chenjh-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
Acked-for-MFD-by: Lee Jones <lee.jones-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
Signed-off-by: Heiko Stuebner <heiko-4mtYJXux2i+zQB+pC5nmwQ@public.gmane.org>
---
 drivers/mfd/Kconfig |   4 +-
 drivers/mfd/rk808.c | 108 ++++++++++++++++++++++++++++++++++++++++++++++++++++
 2 files changed, 110 insertions(+), 2 deletions(-)

diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index c601ee1945c6..f247de83fa6c 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -965,13 +965,13 @@ config MFD_RC5T583
 	  different functionality of the device.
 
 config MFD_RK808
-	tristate "Rockchip RK808/RK818 Power Management Chip"
+	tristate "Rockchip RK805/RK808/RK818 Power Management Chip"
 	depends on I2C && OF
 	select MFD_CORE
 	select REGMAP_I2C
 	select REGMAP_IRQ
 	help
-	  If you say yes here you get support for the RK808 and RK818
+	  If you say yes here you get support for the RK805, RK808 and RK818
 	  Power Management chips.
 	  This driver provides common support for accessing the device
 	  through I2C interface. The device supports multiple sub-devices
diff --git a/drivers/mfd/rk808.c b/drivers/mfd/rk808.c
index 8e60ebaeaadb..18329c8b4fe7 100644
--- a/drivers/mfd/rk808.c
+++ b/drivers/mfd/rk808.c
@@ -70,6 +70,14 @@ static const struct regmap_config rk818_regmap_config = {
 	.volatile_reg = rk808_is_volatile_reg,
 };
 
+static const struct regmap_config rk805_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+	.max_register = RK805_OFF_SOURCE_REG,
+	.cache_type = REGCACHE_RBTREE,
+	.volatile_reg = rk808_is_volatile_reg,
+};
+
 static const struct regmap_config rk808_regmap_config = {
 	.reg_bits = 8,
 	.val_bits = 8,
@@ -86,6 +94,16 @@ static struct resource rtc_resources[] = {
 	}
 };
 
+static const struct mfd_cell rk805s[] = {
+	{ .name = "rk808-clkout", },
+	{ .name = "rk808-regulator", },
+	{
+		.name = "rk808-rtc",
+		.num_resources = ARRAY_SIZE(rtc_resources),
+		.resources = &rtc_resources[0],
+	},
+};
+
 static const struct mfd_cell rk808s[] = {
 	{ .name = "rk808-clkout", },
 	{ .name = "rk808-regulator", },
@@ -106,6 +124,20 @@ static const struct mfd_cell rk818s[] = {
 	},
 };
 
+static const struct rk808_reg_data rk805_pre_init_reg[] = {
+	{RK805_BUCK1_CONFIG_REG, RK805_BUCK1_2_ILMAX_MASK,
+				 RK805_BUCK1_2_ILMAX_4000MA},
+	{RK805_BUCK2_CONFIG_REG, RK805_BUCK1_2_ILMAX_MASK,
+				 RK805_BUCK1_2_ILMAX_4000MA},
+	{RK805_BUCK3_CONFIG_REG, RK805_BUCK3_4_ILMAX_MASK,
+				 RK805_BUCK3_ILMAX_3000MA},
+	{RK805_BUCK4_CONFIG_REG, RK805_BUCK3_4_ILMAX_MASK,
+				 RK805_BUCK4_ILMAX_3500MA},
+	{RK805_BUCK4_CONFIG_REG, BUCK_ILMIN_MASK, BUCK_ILMIN_400MA},
+	{RK805_GPIO_IO_POL_REG, SLP_SD_MSK, SLEEP_FUN},
+	{RK805_THERMAL_REG, TEMP_HOTDIE_MSK, TEMP115C},
+};
+
 static const struct rk808_reg_data rk808_pre_init_reg[] = {
 	{ RK808_BUCK3_CONFIG_REG, BUCK_ILMIN_MASK,  BUCK_ILMIN_150MA },
 	{ RK808_BUCK4_CONFIG_REG, BUCK_ILMIN_MASK,  BUCK_ILMIN_200MA },
@@ -135,6 +167,41 @@ static const struct rk808_reg_data rk818_pre_init_reg[] = {
 						    VB_LO_SEL_3500MV },
 };
 
+static const struct regmap_irq rk805_irqs[] = {
+	[RK805_IRQ_PWRON_RISE] = {
+		.mask = RK805_IRQ_PWRON_RISE_MSK,
+		.reg_offset = 0,
+	},
+	[RK805_IRQ_VB_LOW] = {
+		.mask = RK805_IRQ_VB_LOW_MSK,
+		.reg_offset = 0,
+	},
+	[RK805_IRQ_PWRON] = {
+		.mask = RK805_IRQ_PWRON_MSK,
+		.reg_offset = 0,
+	},
+	[RK805_IRQ_PWRON_LP] = {
+		.mask = RK805_IRQ_PWRON_LP_MSK,
+		.reg_offset = 0,
+	},
+	[RK805_IRQ_HOTDIE] = {
+		.mask = RK805_IRQ_HOTDIE_MSK,
+		.reg_offset = 0,
+	},
+	[RK805_IRQ_RTC_ALARM] = {
+		.mask = RK805_IRQ_RTC_ALARM_MSK,
+		.reg_offset = 0,
+	},
+	[RK805_IRQ_RTC_PERIOD] = {
+		.mask = RK805_IRQ_RTC_PERIOD_MSK,
+		.reg_offset = 0,
+	},
+	[RK805_IRQ_PWRON_FALL] = {
+		.mask = RK805_IRQ_PWRON_FALL_MSK,
+		.reg_offset = 0,
+	},
+};
+
 static const struct regmap_irq rk808_irqs[] = {
 	/* INT_STS */
 	[RK808_IRQ_VOUT_LO] = {
@@ -247,6 +314,17 @@ static const struct regmap_irq rk818_irqs[] = {
 	},
 };
 
+static struct regmap_irq_chip rk805_irq_chip = {
+	.name = "rk805",
+	.irqs = rk805_irqs,
+	.num_irqs = ARRAY_SIZE(rk805_irqs),
+	.num_regs = 1,
+	.status_base = RK805_INT_STS_REG,
+	.mask_base = RK805_INT_STS_MSK_REG,
+	.ack_base = RK805_INT_STS_REG,
+	.init_ack_masked = true,
+};
+
 static const struct regmap_irq_chip rk808_irq_chip = {
 	.name = "rk808",
 	.irqs = rk808_irqs,
@@ -272,6 +350,25 @@ static const struct regmap_irq_chip rk818_irq_chip = {
 };
 
 static struct i2c_client *rk808_i2c_client;
+
+static void rk805_device_shutdown(void)
+{
+	int ret;
+	struct rk808 *rk808 = i2c_get_clientdata(rk808_i2c_client);
+
+	if (!rk808) {
+		dev_warn(&rk808_i2c_client->dev,
+			 "have no rk805, so do nothing here\n");
+		return;
+	}
+
+	ret = regmap_update_bits(rk808->regmap,
+				 RK805_DEV_CTRL_REG,
+				 DEV_OFF, DEV_OFF);
+	if (ret)
+		dev_err(&rk808_i2c_client->dev, "power off error!\n");
+}
+
 static void rk808_device_shutdown(void)
 {
 	int ret;
@@ -309,6 +406,7 @@ static void rk818_device_shutdown(void)
 }
 
 static const struct of_device_id rk808_of_match[] = {
+	{ .compatible = "rockchip,rk805" },
 	{ .compatible = "rockchip,rk808" },
 	{ .compatible = "rockchip,rk818" },
 	{ },
@@ -352,6 +450,15 @@ static int rk808_probe(struct i2c_client *client,
 	dev_info(&client->dev, "chip id: 0x%x\n", (unsigned int)rk808->variant);
 
 	switch (rk808->variant) {
+	case RK805_ID:
+		rk808->regmap_cfg = &rk805_regmap_config;
+		rk808->regmap_irq_chip = &rk805_irq_chip;
+		pre_init_reg = rk805_pre_init_reg;
+		nr_pre_init_regs = ARRAY_SIZE(rk805_pre_init_reg);
+		cells = rk805s;
+		nr_cells = ARRAY_SIZE(rk805s);
+		pm_pwroff_fn = rk805_device_shutdown;
+		break;
 	case RK808_ID:
 		rk808->regmap_cfg = &rk808_regmap_config;
 		rk808->regmap_irq_chip = &rk808_irq_chip;
@@ -444,6 +551,7 @@ static int rk808_remove(struct i2c_client *client)
 }
 
 static const struct i2c_device_id rk808_ids[] = {
+	{ "rk805" },
 	{ "rk808" },
 	{ "rk818" },
 	{ },
-- 
2.14.1

  parent reply	other threads:[~2017-08-21  1:28 UTC|newest]

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-08-21  1:28 [PATCH v9 RESEND 0/9] mfd: rk808: Add RK805 support Heiko Stuebner
2017-08-21  1:28 ` [PATCH v9 RESEND 1/9] mfd: rk808: fix up the chip id get failed Heiko Stuebner
2017-08-21  8:14   ` Lee Jones
2017-08-21  1:28 ` [PATCH v9 RESEND 3/9] regulator: rk808: Add regulator driver for RK805 Heiko Stuebner
2017-08-21  8:15   ` Lee Jones
2017-08-21  1:28 ` [PATCH v9 RESEND 6/9] pinctrl: dt-bindings: add bindings for Rockchip RK805 PMIC Heiko Stuebner
2017-08-21  8:16   ` Lee Jones
2017-08-21  1:28 ` [PATCH v9 RESEND 7/9] pinctrl: Add pinctrl driver for the " Heiko Stuebner
     [not found]   ` <20170821012842.17875-8-heiko-4mtYJXux2i+zQB+pC5nmwQ@public.gmane.org>
2017-08-21  8:16     ` Lee Jones
2017-08-21  1:28 ` [PATCH v9 RESEND 8/9] mfd: rk808: Add RK805 pinctrl support Heiko Stuebner
2017-08-21  8:16   ` Lee Jones
     [not found] ` <20170821012842.17875-1-heiko-4mtYJXux2i+zQB+pC5nmwQ@public.gmane.org>
2017-08-21  1:28   ` [PATCH v9 RESEND 2/9] mfd: rk808: add rk805 regs addr and ID Heiko Stuebner
2017-08-21  8:15     ` Lee Jones
2017-08-21  1:28   ` [PATCH v9 RESEND 4/9] mfd: dt-bindings: Add RK805 device tree bindings document Heiko Stuebner
2017-08-21  8:15     ` Lee Jones
2017-08-21  1:28   ` Heiko Stuebner [this message]
2017-08-21  8:16     ` [PATCH v9 RESEND 5/9] mfd: rk808: Add RK805 support Lee Jones
2017-08-21  1:28   ` [PATCH v9 RESEND 9/9] mfd: rk808: Add RK805 power key support Heiko Stuebner
2017-08-21  8:16     ` Lee Jones
2017-08-21  8:25 ` [GIT PULL] Immutable branch between MFD, Pinctrl and Regulator due for the v4.14 merge window Lee Jones

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20170821012842.17875-6-heiko@sntech.de \
    --to=heiko-4mtyjxux2i+zqb+pc5nmwq@public.gmane.org \
    --cc=chenjh-TNX95d0MmH7DzftRWevZcw@public.gmane.org \
    --cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=lee.jones-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
    --cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=linux-rockchip-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
    --cc=zhangqing-TNX95d0MmH7DzftRWevZcw@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).