From mboxrd@z Thu Jan 1 00:00:00 1970 From: Corentin Labbe Subject: Re: [PATCH v2] arm64: allwinner: h5: add support for NanoPi NEO Plus 2 Date: Fri, 25 Aug 2017 14:05:42 +0200 Message-ID: <20170825120542.GA9475@Red> References: <20170824231716.2623-1-antony@phenome.org> <20170825103242.5665-1-antony@phenome.org> Reply-To: clabbe.montjoie-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org Mime-Version: 1.0 Content-Type: text/plain; charset="UTF-8" Return-path: Sender: linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org Content-Disposition: inline In-Reply-To: <20170825103242.5665-1-antony-AVhj06Q78b5AfugRpC6u6w@public.gmane.org> List-Post: , List-Help: , List-Archive: , List-Unsubscribe: , To: Antony Antony Cc: Maxime Ripard , Chen-Yu Tsai , devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, Linux Kernel Mailing List , linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org, Icenowy Zheng List-Id: devicetree@vger.kernel.org On Fri, Aug 25, 2017 at 12:32:42PM +0200, Antony Antony wrote: > Add initial DT support for NanoPi NEO Plus 2 by FriendlyELEC > Allwinner quad core H5 Cortex A53 with an ARM Mali-450MP GPU > 1 GB DDR3 RAM > 8GB eMMC flash (Samsung KLM8G1WEPD-B031) > micro SD card slot > Gigabit Ethernet (external RTL8211E-VB-CG chip) > 802.11 b/g/n WiFi, Bluetooth 4.0 (Ampak AP6212A module) > 2x USB 2.0 host ports & 2x USB via headers > > The DTS is based on OrangePi PC 2, sun50i-h5-orangepi-pc2 > Added dwmac-sun8i Gigabit Ethernet support based on > Nano Pi Neo2 DT and the schematics. > > Signed-off-by: Antony Antony Hello I do not see changes between v1 to v2. And you need to set your real name in signed-off. Regards Corentin Labbe