From mboxrd@z Thu Jan 1 00:00:00 1970 From: David Disseldorp Subject: [PATCH] arm: sun8i: nanopi-neo: Enable USB OTG Date: Mon, 28 Aug 2017 02:12:51 +0200 Message-ID: <20170828001251.8440-1-ddiss@suse.de> Return-path: Sender: devicetree-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org Cc: maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org, wens-jdAy2FN1RRM@public.gmane.org, icenowy-h8G6r0blFSE@public.gmane.org, David Disseldorp List-Id: devicetree@vger.kernel.org From: David Disseldorp The NanoPi NEO features a MicroUSB port that can work in both host mode and peripheral mode. Switching is handled via GPIO PG12. Signed-off-by: David Disseldorp --- arch/arm/boot/dts/sun8i-h3-nanopi-neo.dts | 27 +++++++++++++++++++++++++++ 1 file changed, 27 insertions(+) diff --git a/arch/arm/boot/dts/sun8i-h3-nanopi-neo.dts b/arch/arm/boot/dts/sun8i-h3-nanopi-neo.dts index 78f6c24952dd..5abf430ac5a6 100644 --- a/arch/arm/boot/dts/sun8i-h3-nanopi-neo.dts +++ b/arch/arm/boot/dts/sun8i-h3-nanopi-neo.dts @@ -47,9 +47,36 @@ compatible = "friendlyarm,nanopi-neo", "allwinner,sun8i-h3"; }; +&ehci0 { + status = "okay"; +}; + +&ehci3 { + status = "okay"; +}; + &emac { phy-handle = <&int_mii_phy>; phy-mode = "mii"; allwinner,leds-active-low; status = "okay"; }; + +&ohci0 { + status = "okay"; +}; + +&ohci3 { + status = "okay"; +}; + +&usb_otg { + dr_mode = "otg"; + status = "okay"; +}; + +&usbphy { + /* USB Type-A port's VBUS is always on */ + usb0_id_det-gpios = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */ + status = "okay"; +}; -- 2.13.5 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html