From mboxrd@z Thu Jan 1 00:00:00 1970 From: Andrey Smirnov Subject: [PATCH v6 2/2] dt-bindings: mfd: Add bindings for ZII RAVE devices Date: Mon, 28 Aug 2017 09:31:31 -0700 Message-ID: <20170828163131.24815-3-andrew.smirnov@gmail.com> References: <20170828163131.24815-1-andrew.smirnov@gmail.com> Return-path: In-Reply-To: <20170828163131.24815-1-andrew.smirnov@gmail.com> Sender: linux-kernel-owner@vger.kernel.org To: linux-kernel@vger.kernel.org Cc: Andrey Smirnov , cphealy@gmail.com, Lucas Stach , Nikita Yushchenko , Rob Herring , Mark Rutland , devicetree@vger.kernel.org, Greg Kroah-Hartman , Pavel Machek List-Id: devicetree@vger.kernel.org Add Device Tree bindings for RAVE Supervisory Processor, an MCU implementing varoius bits of housekeeping functionality (watchdoging, backlight control, LED control, etc) on RAVE family of products by Zodiac Inflight Innovations. Cc: cphealy@gmail.com Cc: Lucas Stach Cc: Nikita Yushchenko Cc: Rob Herring Cc: Mark Rutland Cc: devicetree@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: Greg Kroah-Hartman Cc: Pavel Machek Acked-by: Rob Herring Acked-for-MFD-by: Lee Jones Signed-off-by: Andrey Smirnov --- .../devicetree/bindings/mfd/zii,rave-sp.txt | 39 ++++++++++++++++++++++ 1 file changed, 39 insertions(+) create mode 100644 Documentation/devicetree/bindings/mfd/zii,rave-sp.txt diff --git a/Documentation/devicetree/bindings/mfd/zii,rave-sp.txt b/Documentation/devicetree/bindings/mfd/zii,rave-sp.txt new file mode 100644 index 000000000000..088eff9ddb78 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/zii,rave-sp.txt @@ -0,0 +1,39 @@ +Zodiac Inflight Innovations RAVE Supervisory Processor + +RAVE Supervisory Processor communicates with SoC over UART. It is +expected that its Device Tree node is specified as a child of a node +corresponding to UART controller used for communication. + +Required parent device properties: + + - compatible: Should be one of: + - "zii,rave-sp-niu" + - "zii,rave-sp-mezz" + - "zii,rave-sp-esb" + - "zii,rave-sp-rdu1" + - "zii,rave-sp-rdu2" + + - current-speed: Should be set to baud rate SP device is using + +RAVE SP consists of the following sub-devices: + +Device Description +------ ----------- +rave-sp-wdt : Watchdog +rave-sp-nvmem : Interface to onborad EEPROM +rave-sp-backlight : Display backlight +rave-sp-hwmon : Interface to onboard hardware sensors +rave-sp-leds : Interface to onboard LEDs +rave-sp-input : Interface to onboard power button + +Example of usage: + + rdu { + compatible = "zii,rave-sp-rdu2"; + current-speed = <1000000>; + + watchdog { + compatible = "zii,rave-sp-watchdog"; + }; + }; + -- 2.13.5