From: codekipper-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org
To: maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org
Cc: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org,
Marcus Cooper
<codekipper-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Subject: [linux-sunxi][PATCH] ARM: dts: sunxi: h3/h5 :Add DAI nodes
Date: Sun, 3 Sep 2017 17:08:06 +0200 [thread overview]
Message-ID: <20170903150806.3451-1-codekipper@gmail.com> (raw)
From: Marcus Cooper <codekipper-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Add the new DAI blocks to the device tree. I2S0 and I2S1 are for
connecting to an external codec whereas I2S2 is used for HDMI
audio.
Signed-off-by: Marcus Cooper <codekipper-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
---
arch/arm/boot/dts/sunxi-h3-h5.dtsi | 39 ++++++++++++++++++++++++++++++++++++++
1 file changed, 39 insertions(+)
diff --git a/arch/arm/boot/dts/sunxi-h3-h5.dtsi b/arch/arm/boot/dts/sunxi-h3-h5.dtsi
index 11240a8313c2..cf6fcc857324 100644
--- a/arch/arm/boot/dts/sunxi-h3-h5.dtsi
+++ b/arch/arm/boot/dts/sunxi-h3-h5.dtsi
@@ -450,6 +450,45 @@
status = "disabled";
};
+ i2s0: i2s@01c22000 {
+ #sound-dai-cells = <0>;
+ compatible = "allwinner,sun8i-h3-i2s";
+ reg = <0x01c22000 0x400>;
+ interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_I2S0>, <&ccu CLK_I2S0>;
+ clock-names = "apb", "mod";
+ dmas = <&dma 3>, <&dma 3>;
+ resets = <&ccu RST_BUS_I2S0>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+
+ i2s1: i2s@01c22400 {
+ #sound-dai-cells = <0>;
+ compatible = "allwinner,sun8i-h3-i2s";
+ reg = <0x01c22400 0x400>;
+ interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_I2S1>, <&ccu CLK_I2S1>;
+ clock-names = "apb", "mod";
+ dmas = <&dma 4>, <&dma 4>;
+ resets = <&ccu RST_BUS_I2S1>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+
+ i2s2: i2s@01c22800 {
+ #sound-dai-cells = <0>;
+ compatible = "allwinner,sun8i-h3-i2s";
+ reg = <0x01c22800 0x400>;
+ interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_I2S2>, <&ccu CLK_I2S2>;
+ clock-names = "apb", "mod";
+ dmas = <&dma 5>, <&dma 5>;
+ resets = <&ccu RST_BUS_I2S2>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+
codec: codec@01c22c00 {
#sound-dai-cells = <0>;
compatible = "allwinner,sun8i-h3-codec";
--
2.14.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next reply other threads:[~2017-09-03 15:08 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-09-03 15:08 codekipper-Re5JQEeQqe8AvxtiuMwx3w [this message]
[not found] ` <20170903150806.3451-1-codekipper-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2017-09-03 16:35 ` [PATCH] ARM: dts: sunxi: h3/h5 :Add DAI nodes Jernej Škrabec
2017-09-04 10:51 ` Code Kipper
[not found] ` <CAEKpxB=MF-8BPS_Jc=qgj9sTCfn9EKWxdtJQD4goRGSv0xnHMw-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2017-09-04 11:40 ` [linux-sunxi][PATCH] " Maxime Ripard
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170903150806.3451-1-codekipper@gmail.com \
--to=codekipper-re5jqeeqqe8avxtiumwx3w@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org \
--cc=maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).