Re: [PATCH v2 1/2] ARM: dts: sun8i: h3: Enable AP6212 WiFi on mmc1 on Nanopi M1 Plus

[Maxime Ripard <maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>]

[-- Attachment #1: Type: text/plain, Size: 1706 bytes --]

On Sat, Sep 02, 2017 at 03:01:57PM +0800, icenowy-h8G6r0blFSE@public.gmane.org wrote:
> 在 2017-09-02 00:30，Philipp Rossak 写道：
> > From: Philipp Rossak <embed3d-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
> > 
> > The WiFi side of the AP6212 WiFi/BT combo module is connected to
> > mmc1. There are also GPIOs for enable and interrupts.
> > 
> > Enable WiFi on this board by enabling mmc1 and adding the power
> > sequencing clocks and GPIO, as well as the chip's interrupt line.
> > 
> > Signed-off-by: Philipp Rossak <embed3d-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
> > ---
> >  arch/arm/boot/dts/sun8i-h3-nanopi-m1-plus.dts | 25
> > +++++++++++++++++++++++++
> >  1 file changed, 25 insertions(+)
> > 
> > diff --git a/arch/arm/boot/dts/sun8i-h3-nanopi-m1-plus.dts
> > b/arch/arm/boot/dts/sun8i-h3-nanopi-m1-plus.dts
> > index 6256f55..7d18c35 100644
> > --- a/arch/arm/boot/dts/sun8i-h3-nanopi-m1-plus.dts
> > +++ b/arch/arm/boot/dts/sun8i-h3-nanopi-m1-plus.dts
> > @@ -48,6 +48,13 @@
> > 
> >  	aliases {
> >  		serial1 = &uart3;
> > +		ethernet1 = &sdio_wifi;
> 
> When the Wi-Fi module itself has fixed MAC address, there's
> no need for such an alias.

But the description is also accurate, which is what matters in the DT.

Maxime

-- 
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com

-- 
You received this message because you are subscribed to the Google Groups "linux-sunxi" group.
To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscribe-/JYPxA39Uh5TLH3MbocFF+G/Ez6ZCGd0@public.gmane.org
For more options, visit https://groups.google.com/d/optout.

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 801 bytes --]