[PATCH v8 1/2] ASoC: rt5514: Add devicetree bindings for rt5514-spi

[PATCH v8 1/2] ASoC: rt5514: Add devicetree bindings for rt5514-spi

[Jeffy Chen]

Add devicetree bindings documentation file for rt5514 spi dsp codec.

Also update rt5514 i2c dt-binding's compatible.

Signed-off-by: Jeffy Chen <jeffy.chen-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
---

Changes in v8: None

 .../devicetree/bindings/sound/rt5514-spi.txt       | 32 ++++++++++++++++++++++
 Documentation/devicetree/bindings/sound/rt5514.txt |  2 +-
 2 files changed, 33 insertions(+), 1 deletion(-)
 create mode 100644 Documentation/devicetree/bindings/sound/rt5514-spi.txt

diff --git a/Documentation/devicetree/bindings/sound/rt5514-spi.txt b/Documentation/devicetree/bindings/sound/rt5514-spi.txt
new file mode 100644
index 000000000000..8a63d9423dd9
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/rt5514-spi.txt
@@ -0,0 +1,32 @@
+RT5514 SPI audio CODEC
+
+This device supports SPI only.
+
+Required properties:
+
+- compatible : "realtek,rt5514".
+
+- reg : The SPI address of the device.
+
+Optional properties:
+
+- interrupt-parent: Should be the phandle for the interrupt controller
+- interrupts: The interrupt number to the cpu. The interrupt specifier format
+	      depends on the interrupt controller.
+
+Example:
+
+codec: rt5514-spi@0 {
+	compatible = "realtek,rt5514", "realtek,rt5514-spi";
+	reg = <0>;
+
+        /* May run faster once verified. */
+        spi-max-frequency = <10000000>;
+
+        pinctrl-names = "default";
+        pinctrl-0 = <&mic_int>;
+
+        interrupt-parent = <&gpio1>;
+        interrupts = <13 IRQ_TYPE_LEVEL_HIGH>;
+        wakeup-source;
+};
diff --git a/Documentation/devicetree/bindings/sound/rt5514.txt b/Documentation/devicetree/bindings/sound/rt5514.txt
index 929ca6756b02..12a8c93a67cc 100644
--- a/Documentation/devicetree/bindings/sound/rt5514.txt
+++ b/Documentation/devicetree/bindings/sound/rt5514.txt
@@ -28,6 +28,6 @@ Pins on the device (for linking into audio routes) for RT5514:
 Example:
 
 codec: rt5514@57 {
-	compatible = "realtek,rt5514";
+	compatible = "realtek,rt5514", "realtek,rt5514-i2c";
 	reg = <0x57>;
 };
-- 
2.11.0


--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v8 2/2] arm64: dts: rockchip: Update rt5514 devices' compatible for Gru

[Jeffy Chen]

Currently the rt5514 i2c driver and rt5514 spi driver are using the same
compatible string.

Add additional unused compatible strings to identify them for Gru
boards.

Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com>
---

Changes in v8:
Add new compatible to rt5514 dt doc.

 arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi
index 199a5118b20d..a86afbf09333 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi
@@ -610,7 +610,7 @@ ap_i2c_mic: &i2c1 {
 	i2c-scl-rising-time-ns = <300>;
 
 	headsetcodec: rt5514@57 {
-		compatible = "realtek,rt5514";
+		compatible = "realtek,rt5514", "realtek,rt5514-i2c";
 		reg = <0x57>;
 		realtek,dmic-init-delay-ms = <20>;
 	};
@@ -819,7 +819,7 @@ ap_i2c_audio: &i2c8 {
 	status = "okay";
 
 	wacky_spi_audio: spi2@0 {
-		compatible = "realtek,rt5514";
+		compatible = "realtek,rt5514", "realtek,rt5514-spi";
 		reg = <0>;
 		interrupt-parent = <&gpio1>;
 		interrupts = <13 IRQ_TYPE_LEVEL_HIGH>;
-- 
2.11.0

Re: [PATCH v8 1/2] ASoC: rt5514: Add devicetree bindings for rt5514-spi

[Brian Norris]

On Tue, Sep 05, 2017 at 12:24:59PM +0800, Jeffy Chen wrote:
> Add devicetree bindings documentation file for rt5514 spi dsp codec.
> 
> Also update rt5514 i2c dt-binding's compatible.

You should probably describe *why*?

> Signed-off-by: Jeffy Chen <jeffy.chen-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
> ---
> 
> Changes in v8: None
> 
>  .../devicetree/bindings/sound/rt5514-spi.txt       | 32 ++++++++++++++++++++++
>  Documentation/devicetree/bindings/sound/rt5514.txt |  2 +-
>  2 files changed, 33 insertions(+), 1 deletion(-)
>  create mode 100644 Documentation/devicetree/bindings/sound/rt5514-spi.txt
> 
> diff --git a/Documentation/devicetree/bindings/sound/rt5514-spi.txt b/Documentation/devicetree/bindings/sound/rt5514-spi.txt
> new file mode 100644
> index 000000000000..8a63d9423dd9
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/sound/rt5514-spi.txt
> @@ -0,0 +1,32 @@
> +RT5514 SPI audio CODEC
> +
> +This device supports SPI only.
> +
> +Required properties:
> +
> +- compatible : "realtek,rt5514".

You list one string here, but there's 2 in the example. The point of
this exercise was to document (not just in an Example) the strings
you're using.

> +
> +- reg : The SPI address of the device.
> +
> +Optional properties:
> +
> +- interrupt-parent: Should be the phandle for the interrupt controller
> +- interrupts: The interrupt number to the cpu. The interrupt specifier format
> +	      depends on the interrupt controller.
> +
> +Example:
> +
> +codec: rt5514-spi@0 {
> +	compatible = "realtek,rt5514", "realtek,rt5514-spi";
> +	reg = <0>;
> +
> +        /* May run faster once verified. */

Really? That was barely useful in the rk3399-gru DTSI, but it's
definitely not worth sticking in an example.

Also, you switch between tabs and spaces for indentation. Please be
consistent. (And as with C code, I think the right answer is tabs?)

> +        spi-max-frequency = <10000000>;
> +
> +        pinctrl-names = "default";
> +        pinctrl-0 = <&mic_int>;
> +
> +        interrupt-parent = <&gpio1>;
> +        interrupts = <13 IRQ_TYPE_LEVEL_HIGH>;
> +        wakeup-source;
> +};
> diff --git a/Documentation/devicetree/bindings/sound/rt5514.txt b/Documentation/devicetree/bindings/sound/rt5514.txt
> index 929ca6756b02..12a8c93a67cc 100644
> --- a/Documentation/devicetree/bindings/sound/rt5514.txt
> +++ b/Documentation/devicetree/bindings/sound/rt5514.txt
> @@ -28,6 +28,6 @@ Pins on the device (for linking into audio routes) for RT5514:
>  Example:
>  
>  codec: rt5514@57 {
> -	compatible = "realtek,rt5514";
> +	compatible = "realtek,rt5514", "realtek,rt5514-i2c";

Example != Documentation. Please document the string properly.

Brian

>  	reg = <0x57>;
>  };
> -- 
> 2.11.0
> 
> 
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH v8 1/2] ASoC: rt5514: Add devicetree bindings for rt5514-spi

[jeffy]

Hi Brian,

On 09/06/2017 01:55 AM, Brian Norris wrote:
>> +This device supports SPI only.
>> >+
>> >+Required properties:
>> >+
>> >+- compatible : "realtek,rt5514".
> You list one string here, but there's 2 in the example. The point of
> this exercise was to document (not just in an Example) the strings
> you're using.
Ok, will do.
>
>> >+
>> >+- reg : The SPI address of the device.
>> >+
>> >+Optional properties:
>> >+
>> >+- interrupt-parent: Should be the phandle for the interrupt controller
>> >+- interrupts: The interrupt number to the cpu. The interrupt specifier format
>> >+	      depends on the interrupt controller.
>> >+
>> >+Example:
>> >+
>> >+codec: rt5514-spi@0 {
>> >+	compatible = "realtek,rt5514", "realtek,rt5514-spi";
>> >+	reg = <0>;
>> >+
>> >+        /* May run faster once verified. */
> Really? That was barely useful in the rk3399-gru DTSI, but it's
> definitely not worth sticking in an example.
>
> Also, you switch between tabs and spaces for indentation. Please be
> consistent. (And as with C code, I think the right answer is tabs?)
Oops, thanks for noticing.
>
>> >+        spi-max-frequency = <10000000>;
>> >+
>> >+        pinctrl-names = "default";
>> >+        pinctrl-0 = <&mic_int>;
>> >+
>> >+        interrupt-parent = <&gpio1>;
>> >+        interrupts = <13 IRQ_TYPE_LEVEL_HIGH>;
>> >+        wakeup-source;
>> >+};
>> >diff --git a/Documentation/devicetree/bindings/sound/rt5514.txt b/Documentation/devicetree/bindings/sound/rt5514.txt
>> >index 929ca6756b02..12a8c93a67cc 100644
>> >--- a/Documentation/devicetree/bindings/sound/rt5514.txt
>> >+++ b/Documentation/devicetree/bindings/sound/rt5514.txt
>> >@@ -28,6 +28,6 @@ Pins on the device (for linking into audio routes) for RT5514:
>> >  Example:
>> >
>> >  codec: rt5514@57 {
>> >-	compatible = "realtek,rt5514";
>> >+	compatible = "realtek,rt5514", "realtek,rt5514-i2c";
> Example != Documentation. Please document the string properly.
Ok, will do.
>
> Brian
>