From mboxrd@z Thu Jan 1 00:00:00 1970 From: Chen-Yu Tsai Subject: [PATCH] clk: sunxi-ng: Implement reset control status readback Date: Tue, 26 Sep 2017 10:36:20 +0800 Message-ID: <20170926023620.22284-1-wens@csie.org> Reply-To: wens-jdAy2FN1RRM@public.gmane.org Mime-Version: 1.0 Content-Type: text/plain; charset="UTF-8" Return-path: Sender: linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org List-Post: , List-Help: , List-Archive: , List-Unsubscribe: , To: Maxime Ripard , Michael Turquette , Stephen Boyd Cc: Chen-Yu Tsai , linux-clk-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org List-Id: devicetree@vger.kernel.org Until now we were not providing a way to read back the status of our reset controls. Consumers had no real way to be certain whether a peripheral was held in reset or not. Implement the status callback to complete the API support. Fixes: 1d80c14248d6 ("clk: sunxi-ng: Add common infrastructure") Signed-off-by: Chen-Yu Tsai --- drivers/clk/sunxi-ng/ccu_reset.c | 14 ++++++++++++++ 1 file changed, 14 insertions(+) diff --git a/drivers/clk/sunxi-ng/ccu_reset.c b/drivers/clk/sunxi-ng/ccu_reset.c index 1dc4e98ea802..b67149143554 100644 --- a/drivers/clk/sunxi-ng/ccu_reset.c +++ b/drivers/clk/sunxi-ng/ccu_reset.c @@ -60,8 +60,22 @@ static int ccu_reset_reset(struct reset_controller_dev *rcdev, return 0; } +static int ccu_reset_status(struct reset_controller_dev *rcdev, + unsigned long id) +{ + struct ccu_reset *ccu = rcdev_to_ccu_reset(rcdev); + const struct ccu_reset_map *map = &ccu->reset_map[id]; + + /* + * The reset control API expects 0 if reset is not asserted, + * which is the opposite of what our hardware uses. + */ + return !(map->bit & readl(ccu->base + map->reg)); +} + const struct reset_control_ops ccu_reset_ops = { .assert = ccu_reset_assert, .deassert = ccu_reset_deassert, .reset = ccu_reset_reset, + .status = ccu_reset_status, }; -- 2.14.1