devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Oleksij Rempel <o.rempel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
To: Wim Van Sebroeck <wim-IQzOog9fTRqzQB+pC5nmwQ@public.gmane.org>,
	Guenter Roeck <linux-0h96xk9xTtrk1uMJSBkQmQ@public.gmane.org>,
	Dinh Nguyen <dinguyen-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
	Rob Herring <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
	Mark Rutland <mark.rutland-5wv7dgnIgG8@public.gmane.org>
Cc: Oleksij Rempel <o.rempel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>,
	linux-watchdog-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	kernel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org,
	Russell King <linux-I+IVW8TIWO2tmTQ+vhA3Yw@public.gmane.org>,
	devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
	linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Subject: [PATCH v4 1/2] watchdog: dw_wdt: add stop watchdog operation
Date: Tue, 26 Sep 2017 08:11:22 +0200	[thread overview]
Message-ID: <20170926061123.29614-1-o.rempel@pengutronix.de> (raw)

The only way of stopping the watchdog is by resetting it.
Add the watchdog op for stopping the device and reset if
a reset line is provided.

At same time WDOG_HW_RUNNING should be remove from dw_wdt_start.
As commented by Guenter Roeck:
dw_wdt sets WDOG_HW_RUNNING in its open function. Result is
that the kref_get() in watchdog_open() won't be executed. But then
kref_put() in close will be called since the watchdog now does stop.
This causes the imbalance.

Signed-off-by: Oleksij Rempel <o.rempel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
Cc: Wim Van Sebroeck <wim-IQzOog9fTRqzQB+pC5nmwQ@public.gmane.org>
Cc: Guenter Roeck <linux-0h96xk9xTtrk1uMJSBkQmQ@public.gmane.org>
Cc: linux-watchdog-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
---

changes v4:
 - remove WDOG_HW_RUNNING from dw_wdt_start.

changes v3:
 - don't return error if rst is not present and set WDOG_HW_RUNNING bit
   to notify watchdog core.

changes v2:
 - test if dw_wdt->rst is NULL instead of IS_ERR

 drivers/watchdog/dw_wdt.c | 18 ++++++++++++++++--
 1 file changed, 16 insertions(+), 2 deletions(-)

diff --git a/drivers/watchdog/dw_wdt.c b/drivers/watchdog/dw_wdt.c
index 36be987ff9ef..c2f4ff516230 100644
--- a/drivers/watchdog/dw_wdt.c
+++ b/drivers/watchdog/dw_wdt.c
@@ -127,14 +127,27 @@ static int dw_wdt_start(struct watchdog_device *wdd)
 
 	dw_wdt_set_timeout(wdd, wdd->timeout);
 
-	set_bit(WDOG_HW_RUNNING, &wdd->status);
-
 	writel(WDOG_CONTROL_REG_WDT_EN_MASK,
 	       dw_wdt->regs + WDOG_CONTROL_REG_OFFSET);
 
 	return 0;
 }
 
+static int dw_wdt_stop(struct watchdog_device *wdd)
+{
+	struct dw_wdt *dw_wdt = to_dw_wdt(wdd);
+
+	if (!dw_wdt->rst) {
+		set_bit(WDOG_HW_RUNNING, &wdd->status);
+		return 0;
+	}
+
+	reset_control_assert(dw_wdt->rst);
+	reset_control_deassert(dw_wdt->rst);
+
+	return 0;
+}
+
 static int dw_wdt_restart(struct watchdog_device *wdd,
 			  unsigned long action, void *data)
 {
@@ -173,6 +186,7 @@ static const struct watchdog_info dw_wdt_ident = {
 static const struct watchdog_ops dw_wdt_ops = {
 	.owner		= THIS_MODULE,
 	.start		= dw_wdt_start,
+	.stop		= dw_wdt_stop,
 	.ping		= dw_wdt_ping,
 	.set_timeout	= dw_wdt_set_timeout,
 	.get_timeleft	= dw_wdt_get_timeleft,
-- 
2.11.0

--
To unsubscribe from this list: send the line "unsubscribe linux-watchdog" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

             reply	other threads:[~2017-09-26  6:11 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-09-26  6:11 Oleksij Rempel [this message]
     [not found] ` <20170926061123.29614-1-o.rempel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
2017-09-26  6:11   ` [PATCH v4 2/2] ARM: socfpga: dtsi: add dw-wdt reset lines Oleksij Rempel
2017-09-26 15:13   ` [PATCH v4 1/2] watchdog: dw_wdt: add stop watchdog operation Guenter Roeck

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20170926061123.29614-1-o.rempel@pengutronix.de \
    --to=o.rempel-bicnvbalz9megne8c9+irq@public.gmane.org \
    --cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=dinguyen-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
    --cc=kernel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org \
    --cc=linux-0h96xk9xTtrk1uMJSBkQmQ@public.gmane.org \
    --cc=linux-I+IVW8TIWO2tmTQ+vhA3Yw@public.gmane.org \
    --cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
    --cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=linux-watchdog-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=mark.rutland-5wv7dgnIgG8@public.gmane.org \
    --cc=robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
    --cc=wim-IQzOog9fTRqzQB+pC5nmwQ@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).