From: "Andrew F. Davis" <afd-l0cyMroinI0@public.gmane.org>
To: "Benoît Cousson"
<bcousson-rdvid1DuHRBWk0Htik3J/w@public.gmane.org>,
"Tony Lindgren" <tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org>
Cc: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-omap-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
"Andrew F . Davis" <afd-l0cyMroinI0@public.gmane.org>
Subject: [PATCH 03/11] ARM: dts: am43xx-epos-evm: Add sleep pinmux for qspi1
Date: Fri, 29 Sep 2017 11:44:21 -0500 [thread overview]
Message-ID: <20170929164429.780-4-afd@ti.com> (raw)
In-Reply-To: <20170929164429.780-1-afd-l0cyMroinI0@public.gmane.org>
Signed-off-by: Andrew F. Davis <afd-l0cyMroinI0@public.gmane.org>
---
arch/arm/boot/dts/am43x-epos-evm.dts | 18 +++++++++++++++---
1 file changed, 15 insertions(+), 3 deletions(-)
diff --git a/arch/arm/boot/dts/am43x-epos-evm.dts b/arch/arm/boot/dts/am43x-epos-evm.dts
index f73c22ce4003..2b9ea3810fcc 100644
--- a/arch/arm/boot/dts/am43x-epos-evm.dts
+++ b/arch/arm/boot/dts/am43x-epos-evm.dts
@@ -274,7 +274,7 @@
>;
};
- qspi1_default: qspi1_default {
+ qspi1_pins_default: qspi1_pins_default {
pinctrl-single,pins = <
AM4372_IOPAD(0x87c, PIN_INPUT_PULLUP | MUX_MODE3)
AM4372_IOPAD(0x888, PIN_INPUT_PULLUP | MUX_MODE2)
@@ -285,6 +285,17 @@
>;
};
+ qspi1_pins_sleep: qspi1_pins_sleep {
+ pinctrl-single,pins = <
+ AM4372_IOPAD(0x87c, DS0_PIN_OUTPUT_PULLUP | MUX_MODE7)
+ AM4372_IOPAD(0x888, DS0_PIN_OUTPUT_PULLUP | MUX_MODE7)
+ AM4372_IOPAD(0x890, DS0_PIN_OUTPUT_PULLUP | MUX_MODE7)
+ AM4372_IOPAD(0x894, DS0_PIN_OUTPUT_PULLUP | MUX_MODE7)
+ AM4372_IOPAD(0x898, DS0_PIN_OUTPUT_PULLUP | MUX_MODE7)
+ AM4372_IOPAD(0x89c, DS0_PIN_OUTPUT_PULLUP | MUX_MODE7)
+ >;
+ };
+
pixcir_ts_pins: pixcir_ts_pins {
pinctrl-single,pins = <
AM4372_IOPAD(0x844, PIN_INPUT_PULLUP | MUX_MODE7) /* gpmc_a1.gpio1_17 */
@@ -707,8 +718,9 @@
&qspi {
status = "disabled"; /* Disable GPMC (NAND) when enabling QSPI */
- pinctrl-names = "default";
- pinctrl-0 = <&qspi1_default>;
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&qspi1_pins_default>;
+ pinctrl-1 = <&qspi1_pins_sleep>;
spi-max-frequency = <48000000>;
m25p80@0 {
--
2.14.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2017-09-29 16:44 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-09-29 16:44 [PATCH 00/11] AM43xx EPOS EVM sleep pinmux Andrew F. Davis
[not found] ` <20170929164429.780-1-afd-l0cyMroinI0@public.gmane.org>
2017-09-29 16:44 ` [PATCH 01/11] ARM: dts: am43xx: Introduce additional pinmux definitions for DS0 Andrew F. Davis
2017-09-29 16:44 ` [PATCH 02/11] ARM: dts: am43xx-epos-evm: Add sleep pinmux for spi0 and spi1 Andrew F. Davis
2017-09-29 16:44 ` Andrew F. Davis [this message]
2017-09-29 16:44 ` [PATCH 04/11] ARM: dts: am43xx-epos-evm: Add sleep pinmux for ecap0 Andrew F. Davis
2017-09-29 16:44 ` [PATCH 05/11] ARM: dts: am43xx-epos-evm: Add sleep pinmux for gpmc Andrew F. Davis
2017-09-29 16:44 ` [PATCH 06/11] ARM: dts: am43xx-epos-evm: Add sleep pinmux for pixcir_ts Andrew F. Davis
2017-09-29 16:44 ` [PATCH 07/11] ARM: dts: am43xx-epos-evm: Add sleep pinmux for mmc1 Andrew F. Davis
2017-09-29 16:44 ` [PATCH 08/11] ARM: dts: am43xx-epos-evm: Add default and sleep pinmux for matrix_keypad0 Andrew F. Davis
2017-09-29 16:44 ` [PATCH 09/11] ARM: dts: am43xx-epos-evm: Add default and sleep pinmux for uart0 Andrew F. Davis
2017-09-29 16:44 ` [PATCH 10/11] ARM: dts: am43xx-epos-evm: Add default and sleep pinmux for usb2_phy1 and usb2_phy2 Andrew F. Davis
2017-09-29 16:44 ` [PATCH 11/11] ARM: dts: am43xx-epos-evm: Add default pinmux for unused pins Andrew F. Davis
2017-10-02 19:59 ` [PATCH 00/11] AM43xx EPOS EVM sleep pinmux Tony Lindgren
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170929164429.780-4-afd@ti.com \
--to=afd-l0cymroini0@public.gmane.org \
--cc=bcousson-rdvid1DuHRBWk0Htik3J/w@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-omap-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).