From mboxrd@z Thu Jan  1 00:00:00 1970
From: Joel Stanley <joel@jms.id.au>
Subject: [PATCH v2 4/9] ARM: dts: aspeed-romulus: Add I2C devices
Date: Wed,  4 Oct 2017 17:19:12 +1030
Message-ID: <20171004064917.2498-5-joel@jms.id.au>
References: <20171004064917.2498-1-joel@jms.id.au>
Return-path: <linux-kernel-owner@vger.kernel.org>
In-Reply-To: <20171004064917.2498-1-joel@jms.id.au>
Sender: linux-kernel-owner@vger.kernel.org
To: Joel Stanley <joel@jms.id.au>, Rob Herring <robh+dt@kernel.org>, Mark Rutland <mark.rutland@arm.com>
Cc: Russell King <linux@armlinux.org.uk>, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, Andrew Jeffery <andrew@aj.id.au>, Rick Altherr <raltherr@google.com>, Brendan Higgins <brendanhiggins@google.com>, =?UTF-8?q?C=C3=A9dric=20Le=20Goater?= <clg@kaod.org>, linux-aspeed@lists.ozlabs.org
List-Id: devicetree@vger.kernel.org

Enable the buses that are in use and the devices that are attached.
Currently that is just the battery backed RTC.

Some of these buses are for hotplugged cards, such as PCIe cards. Others
do not yet have upstream drivers, so there are no devices attached.

Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
---
v2:
 - Use okay not enabled for the status
---
 arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts | 54 ++++++++++++++++++++++++++++
 1 file changed, 54 insertions(+)

diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts b/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts
index 1190fec1b5d0..8b96baf7c4de 100644
--- a/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts
@@ -79,3 +79,57 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_rmii1_default>;
 };
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+&i2c4 {
+	status = "okay";
+};
+
+&i2c5 {
+	status = "okay";
+};
+
+&i2c6 {
+	/* PCIe slot 1 (x8) */
+	status = "okay";
+};
+
+&i2c7 {
+	/* PCIe slot 2 (x16) */
+	status = "okay";
+};
+
+&i2c8 {
+	/* PCIe slot 3 (x16) */
+	status = "okay";
+};
+
+&i2c9 {
+	/* PCIe slot 4 (x16) */
+	status = "okay";
+};
+
+&i2c10 {
+	/* PCIe slot 5 (x8) */
+	status = "okay";
+};
+
+&i2c11 {
+	status = "okay";
+
+	rtc@32 {
+		compatible = "epson,rx8900";
+		reg = <0x32>;
+	};
+};
+
+&i2c12 {
+	status = "okay";
+};
-- 
2.14.1