From: Joel Stanley <joel-U3u1mxZcP9KHXe+LvDLADg@public.gmane.org>
To: Joel Stanley <joel-U3u1mxZcP9KHXe+LvDLADg@public.gmane.org>,
Rob Herring <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
Mark Rutland <mark.rutland-5wv7dgnIgG8@public.gmane.org>
Cc: "Russell King" <linux-I+IVW8TIWO2tmTQ+vhA3Yw@public.gmane.org>,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
"Andrew Jeffery" <andrew-zrmu5oMJ5Fs@public.gmane.org>,
"Rick Altherr" <raltherr-hpIqsD4AKlfQT0dZR+AlfA@public.gmane.org>,
"Brendan Higgins"
<brendanhiggins-hpIqsD4AKlfQT0dZR+AlfA@public.gmane.org>,
"Cédric Le Goater" <clg-Bxea+6Xhats@public.gmane.org>,
linux-aspeed-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org
Subject: [PATCH v2 8/9] ARM: dts: aspeed: Correctly order UART nodes
Date: Wed, 4 Oct 2017 17:19:16 +1030 [thread overview]
Message-ID: <20171004064917.2498-9-joel@jms.id.au> (raw)
In-Reply-To: <20171004064917.2498-1-joel-U3u1mxZcP9KHXe+LvDLADg@public.gmane.org>
Order them all by address.
Signed-off-by: Joel Stanley <joel-U3u1mxZcP9KHXe+LvDLADg@public.gmane.org>
---
arch/arm/boot/dts/aspeed-g4.dtsi | 48 +++++++++++++++----------------
arch/arm/boot/dts/aspeed-g5.dtsi | 61 ++++++++++++++++++++--------------------
2 files changed, 54 insertions(+), 55 deletions(-)
diff --git a/arch/arm/boot/dts/aspeed-g4.dtsi b/arch/arm/boot/dts/aspeed-g4.dtsi
index a549413bda3f..4125e07f22f9 100644
--- a/arch/arm/boot/dts/aspeed-g4.dtsi
+++ b/arch/arm/boot/dts/aspeed-g4.dtsi
@@ -183,6 +183,27 @@
clock-names = "PCLK";
};
+ uart1: serial@1e783000 {
+ compatible = "ns16550a";
+ reg = <0x1e783000 0x1000>;
+ reg-shift = <2>;
+ interrupts = <9>;
+ clocks = <&clk_uart>;
+ no-loopback-test;
+ status = "disabled";
+ };
+
+ uart5: serial@1e784000 {
+ compatible = "ns16550a";
+ reg = <0x1e784000 0x1000>;
+ reg-shift = <2>;
+ interrupts = <10>;
+ clocks = <&clk_uart>;
+ current-speed = <38400>;
+ no-loopback-test;
+ status = "disabled";
+ };
+
wdt1: wdt@1e785000 {
compatible = "aspeed,ast2400-wdt";
reg = <0x1e785000 0x1c>;
@@ -197,11 +218,11 @@
status = "disabled";
};
- uart1: serial@1e783000 {
+ uart6: serial@1e787000 {
compatible = "ns16550a";
- reg = <0x1e783000 0x1000>;
+ reg = <0x1e787000 0x1000>;
reg-shift = <2>;
- interrupts = <9>;
+ interrupts = <10>;
clocks = <&clk_uart>;
no-loopback-test;
status = "disabled";
@@ -237,27 +258,6 @@
status = "disabled";
};
- uart5: serial@1e784000 {
- compatible = "ns16550a";
- reg = <0x1e784000 0x1000>;
- reg-shift = <2>;
- interrupts = <10>;
- clocks = <&clk_uart>;
- current-speed = <38400>;
- no-loopback-test;
- status = "disabled";
- };
-
- uart6: serial@1e787000 {
- compatible = "ns16550a";
- reg = <0x1e787000 0x1000>;
- reg-shift = <2>;
- interrupts = <10>;
- clocks = <&clk_uart>;
- no-loopback-test;
- status = "disabled";
- };
-
i2c: i2c@1e78a000 {
compatible = "simple-bus";
#address-cells = <1>;
diff --git a/arch/arm/boot/dts/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed-g5.dtsi
index de2dafa71651..61cc2d25143a 100644
--- a/arch/arm/boot/dts/aspeed-g5.dtsi
+++ b/arch/arm/boot/dts/aspeed-g5.dtsi
@@ -227,6 +227,26 @@
clock-names = "PCLK";
};
+ uart1: serial@1e783000 {
+ compatible = "ns16550a";
+ reg = <0x1e783000 0x1000>;
+ reg-shift = <2>;
+ interrupts = <9>;
+ clocks = <&clk_uart>;
+ no-loopback-test;
+ status = "disabled";
+ };
+
+ uart5: serial@1e784000 {
+ compatible = "ns16550a";
+ reg = <0x1e784000 0x1000>;
+ reg-shift = <2>;
+ interrupts = <10>;
+ clocks = <&clk_uart>;
+ current-speed = <38400>;
+ no-loopback-test;
+ status = "disabled";
+ };
wdt1: wdt@1e785000 {
compatible = "aspeed,ast2500-wdt";
@@ -247,16 +267,6 @@
status = "disabled";
};
- uart1: serial@1e783000 {
- compatible = "ns16550a";
- reg = <0x1e783000 0x1000>;
- reg-shift = <2>;
- interrupts = <9>;
- clocks = <&clk_uart>;
- no-loopback-test;
- status = "disabled";
- };
-
lpc: lpc@1e789000 {
compatible = "aspeed,ast2500-lpc", "simple-mfd";
reg = <0x1e789000 0x1000>;
@@ -287,6 +297,16 @@
};
};
+ uart6: serial@1e787000 {
+ compatible = "ns16550a";
+ reg = <0x1e787000 0x1000>;
+ reg-shift = <2>;
+ interrupts = <10>;
+ clocks = <&clk_uart>;
+ no-loopback-test;
+ status = "disabled";
+ };
+
uart2: serial@1e78d000 {
compatible = "ns16550a";
reg = <0x1e78d000 0x1000>;
@@ -317,27 +337,6 @@
status = "disabled";
};
- uart5: serial@1e784000 {
- compatible = "ns16550a";
- reg = <0x1e784000 0x1000>;
- reg-shift = <2>;
- interrupts = <10>;
- clocks = <&clk_uart>;
- current-speed = <38400>;
- no-loopback-test;
- status = "disabled";
- };
-
- uart6: serial@1e787000 {
- compatible = "ns16550a";
- reg = <0x1e787000 0x1000>;
- reg-shift = <2>;
- interrupts = <10>;
- clocks = <&clk_uart>;
- no-loopback-test;
- status = "disabled";
- };
-
i2c: i2c@1e78a000 {
compatible = "simple-bus";
#address-cells = <1>;
--
2.14.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2017-10-04 6:49 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-10-04 6:49 [PATCH v2 0/9] ARM: dts: aspeed: Device tree updates Joel Stanley
2017-10-04 6:49 ` [PATCH v2 1/9] ARM: dts: aspeed: Move pinctrl subnodes to improve readability Joel Stanley
2017-10-04 6:49 ` [PATCH v2 2/9] ARM: dts: aspeed: Reorder ADC node Joel Stanley
2017-10-04 23:31 ` Andrew Jeffery
2017-10-04 6:49 ` [PATCH v2 3/9] ARM: dts: aspeed: Add I2C buses Joel Stanley
2017-10-04 6:49 ` [PATCH v2 4/9] ARM: dts: aspeed-romulus: Add I2C devices Joel Stanley
[not found] ` <20171004064917.2498-5-joel-U3u1mxZcP9KHXe+LvDLADg@public.gmane.org>
2017-10-04 23:35 ` Andrew Jeffery
2017-10-04 6:49 ` [PATCH v2 5/9] ARM: dts: aspeed-palmetto: " Joel Stanley
2017-10-04 6:49 ` [PATCH v2 7/9] ARM: dts: aspeed: Add aliases for UARTs Joel Stanley
[not found] ` <20171004064917.2498-1-joel-U3u1mxZcP9KHXe+LvDLADg@public.gmane.org>
2017-10-04 6:49 ` [PATCH v2 6/9] ARM: dts: aspeed-ast2500: Add I2C devices Joel Stanley
2017-10-04 6:49 ` Joel Stanley [this message]
[not found] ` <20171004064917.2498-9-joel-U3u1mxZcP9KHXe+LvDLADg@public.gmane.org>
2017-10-04 23:37 ` [PATCH v2 8/9] ARM: dts: aspeed: Correctly order UART nodes Andrew Jeffery
2017-10-04 6:49 ` [PATCH v2 9/9] ARM: dts: aspeed: Clean up " Joel Stanley
[not found] ` <20171004064917.2498-10-joel-U3u1mxZcP9KHXe+LvDLADg@public.gmane.org>
2017-10-04 6:52 ` Joel Stanley
[not found] ` <CACPK8XcQB6PQhGxESV0owo_sAg2+4KV7hsyT-TJOpuOCXmTcdw-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2017-10-04 23:39 ` Andrew Jeffery
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20171004064917.2498-9-joel@jms.id.au \
--to=joel-u3u1mxzcp9khxe+lvdladg@public.gmane.org \
--cc=andrew-zrmu5oMJ5Fs@public.gmane.org \
--cc=brendanhiggins-hpIqsD4AKlfQT0dZR+AlfA@public.gmane.org \
--cc=clg-Bxea+6Xhats@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-I+IVW8TIWO2tmTQ+vhA3Yw@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=linux-aspeed-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=mark.rutland-5wv7dgnIgG8@public.gmane.org \
--cc=raltherr-hpIqsD4AKlfQT0dZR+AlfA@public.gmane.org \
--cc=robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).