Re: [PATCH v6 05/11] dt-bindings: net: dwmac-sun8i: update documentation about integrated PHY

[Corentin Labbe <clabbe.montjoie-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>]

On Thu, Sep 28, 2017 at 09:37:08AM +0200, Corentin Labbe wrote:
> On Wed, Sep 27, 2017 at 04:02:10PM +0200, Andrew Lunn wrote:
> > Hi Corentin
> > 
> > > +Required properties for the mdio-mux node:
> > > +  - compatible = "mdio-mux"
> > 
> > This is too generic. Please add a more specific compatible for this
> > particular mux. You can keep "mdio-mux", since that is what the MDIO
> > subsystem will look for.
> > 
> 
> I will add allwinner,sun8i-h3-mdio-mux
> 
> > > +Required properties of the integrated phy node:
> > >  - clocks: a phandle to the reference clock for the EPHY
> > >  - resets: a phandle to the reset control for the EPHY
> > > +- phy-is-integrated
> > 
> > So the last thing you said is that the mux is not the problem
> > here. Something else is locking up. Did you discover what?
> > 
> > I really would like phy-is-integrated to go away.
> > 
> 
> I have found the problem: by enabling ephy clk/reset the timeout does not occur anymore.
> So we could remove phy-is-integrated by:
> Moving internal phy clk/reset handling in mdio_mux_syscon_switch_fn()
> But this means:
> - getting internalphy node always by manually get internal_mdio/internal_phy (and not by the given phyhandle)
> - doing some unnecessary tasks (enable/scan/disable) when external_phy is needed
> 

Hello

I have get rid of phy-is-integrated, but mdio_mux_syscon_switch_fn need to enable/disable ephy clk/reset.
And so access to internal PHY node.
But current DT made this ugly: (need to find mdio-mux then internalmdio then internal PHY)

Since MAC cannot reset/choose internal MDIO without ephy clk/rst, could we interpret this as thoses clk/rst must be set in emac node.
This will simplify a lot the code.

Regards