[PATCH 2/2] dt-bindings: Add I2C attached EETI EXC3000 bindings

[Ahmet Inan <inan@distec.de>]

This documents the use of the dt-bindings for the EETI EXC3000 driver
with the following example configuration:

Using the I2C address 0x2a of the touch controller in the driver.

Using pin 9 as low level-sensitive interrupt to signal the driver.

Using a 4096x4096 touch screen resolution.

Inverting the x-axis and swapping the result with the y-axis.

Signed-off-by: Ahmet Inan <inan@distec.de>
---
 .../bindings/input/touchscreen/exc3000.txt         | 27 ++++++++++++++++++++++
 1 file changed, 27 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/input/touchscreen/exc3000.txt

diff --git a/Documentation/devicetree/bindings/input/touchscreen/exc3000.txt b/Documentation/devicetree/bindings/input/touchscreen/exc3000.txt
new file mode 100644
index 000000000000..1dcff4a43eaa
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/exc3000.txt
@@ -0,0 +1,27 @@
+* EETI EXC3000 Multiple Touch Controller
+
+Required properties:
+- compatible: must be "eeti,exc3000"
+- reg: i2c slave address
+- interrupt-parent: the phandle for the interrupt controller
+- interrupts: touch controller interrupt
+- touchscreen-size-x: See touchscreen.txt
+- touchscreen-size-y: See touchscreen.txt
+
+Optional properties:
+- touchscreen-inverted-x: See touchscreen.txt
+- touchscreen-inverted-y: See touchscreen.txt
+- touchscreen-swapped-x-y: See touchscreen.txt
+
+Example:
+
+	touchscreen@2a {
+		compatible = "eeti,exc3000";
+		reg = <0x2a>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <9 IRQ_TYPE_LEVEL_LOW>;
+		touchscreen-size-x = <4096>;
+		touchscreen-size-y = <4096>;
+		touchscreen-inverted-x;
+		touchscreen-swapped-x-y;
+	};
-- 
2.11.0