* [PATCH 1/2] ARM: dts: BCM5301X: Add DT for Luxul XBR-4500 @ 2017-10-09 15:46 Dan Haab [not found] ` <1507563983-7354-1-git-send-email-riproute-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> 0 siblings, 1 reply; 6+ messages in thread From: Dan Haab @ 2017-10-09 15:46 UTC (permalink / raw) To: Florian Fainelli Cc: Rafał Miłecki, Hauke Mehrtens, Jon Mason, bcm-kernel-feedback-list-dY08KVG/lbpWk0Htik3J/w, Rob Herring, Mark Rutland, Russell King, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, devicetree-u79uwXL29TY76Z2rM5mHXA, Dan Haab From: Dan Haab <dhaab-RSK6WAzFx3QAvxtiuMwx3w@public.gmane.org> This is BCM47094 (AKA BCM4709C0) based router with ports-on-the-front board design. Signed-off-by: Dan Haab <dhaab-RSK6WAzFx3QAvxtiuMwx3w@public.gmane.org> --- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts | 63 +++++++++++++++++++++++++++ 2 files changed, 64 insertions(+) create mode 100644 arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index faf46ab..563f8a4 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -100,6 +100,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \ bcm4709-tplink-archer-c9-v1.dtb \ bcm47094-dlink-dir-885l.dtb \ bcm47094-linksys-panamera.dtb \ + bcm47094-luxul-xbr-4500.dtb \ bcm47094-luxul-xwr-3100.dtb \ bcm47094-netgear-r8500.dtb \ bcm94708.dtb \ diff --git a/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts b/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts new file mode 100644 index 0000000..15ffb1a --- /dev/null +++ b/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts @@ -0,0 +1,63 @@ +/* + * Copyright (C) 2017 Luxul Inc. + * + * Licensed under the ISC license. + */ + +/dts-v1/; + +#include "bcm4708.dtsi" +#include "bcm5301x-nand-cs0-bch8.dtsi" + +/ { + compatible = "luxul,xbr-4500-v1", "brcm,bcm47094", "brcm,bcm4708"; + model = "Luxul XBR-4500 V1"; + + chosen { + bootargs = "earlycon"; + }; + + memory { + reg = <0x00000000 0x08000000 + 0x88000000 0x18000000>; + }; + + leds { + compatible = "gpio-leds"; + + status { + label = "bcm53xx:green:status"; + gpios = <&chipcommon 20 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "timer"; + }; + + usb3 { + label = "bcm53xx:green:usb3"; + gpios = <&chipcommon 19 GPIO_ACTIVE_HIGH>; + trigger-sources = <&ohci_port1>, <&ehci_port1>, + <&xhci_port1>; + linux,default-trigger = "usbport"; + }; + + }; + + gpio-keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + restart { + label = "Reset"; + linux,code = <KEY_RESTART>; + gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&usb3 { + vcc-gpio = <&chipcommon 18 GPIO_ACTIVE_HIGH>; +}; + +&spi_nor { + status = "okay"; +}; -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply related [flat|nested] 6+ messages in thread
[parent not found: <1507563983-7354-1-git-send-email-riproute-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>]
* [PATCH 2/2] ARM: dts: BCM5301X: Add DT for Luxul ABR-4500 [not found] ` <1507563983-7354-1-git-send-email-riproute-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> @ 2017-10-09 15:46 ` Dan Haab [not found] ` <1507563983-7354-2-git-send-email-riproute-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> 2017-10-09 16:50 ` [PATCH 1/2] ARM: dts: BCM5301X: Add DT for Luxul XBR-4500 Rafał Miłecki 2017-10-09 19:44 ` Florian Fainelli 2 siblings, 1 reply; 6+ messages in thread From: Dan Haab @ 2017-10-09 15:46 UTC (permalink / raw) To: Florian Fainelli Cc: Rafał Miłecki, Hauke Mehrtens, Jon Mason, bcm-kernel-feedback-list-dY08KVG/lbpWk0Htik3J/w, Rob Herring, Mark Rutland, Russell King, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, devicetree-u79uwXL29TY76Z2rM5mHXA, Dan Haab From: Dan Haab <dhaab-RSK6WAzFx3QAvxtiuMwx3w@public.gmane.org> This is BCM47094 (AKA BCM4709C0) based router with rear-facing ports board design. Signed-off-by: Dan Haab <dhaab-RSK6WAzFx3QAvxtiuMwx3w@public.gmane.org> --- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts | 63 +++++++++++++++++++++++++++ 2 files changed, 64 insertions(+) create mode 100644 arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 563f8a4..2d964c9 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -100,6 +100,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \ bcm4709-tplink-archer-c9-v1.dtb \ bcm47094-dlink-dir-885l.dtb \ bcm47094-linksys-panamera.dtb \ + bcm47094-luxul-abr-4500.dtb \ bcm47094-luxul-xbr-4500.dtb \ bcm47094-luxul-xwr-3100.dtb \ bcm47094-netgear-r8500.dtb \ diff --git a/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts b/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts new file mode 100644 index 0000000..ecd22a2 --- /dev/null +++ b/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts @@ -0,0 +1,63 @@ +/* + * Copyright (C) 2017 Luxul Inc. + * + * Licensed under the ISC license. + */ + +/dts-v1/; + +#include "bcm4708.dtsi" +#include "bcm5301x-nand-cs0-bch8.dtsi" + +/ { + compatible = "luxul,abr-4500-v1", "brcm,bcm47094", "brcm,bcm4708"; + model = "Luxul ABR-4500 V1"; + + chosen { + bootargs = "earlycon"; + }; + + memory { + reg = <0x00000000 0x08000000 + 0x88000000 0x18000000>; + }; + + leds { + compatible = "gpio-leds"; + + status { + label = "bcm53xx:green:status"; + gpios = <&chipcommon 20 GPIO_ACTIVE_LOW>; + linux,default-trigger = "timer"; + }; + + usb3 { + label = "bcm53xx:green:usb3"; + gpios = <&chipcommon 19 GPIO_ACTIVE_LOW>; + trigger-sources = <&ohci_port1>, <&ehci_port1>, + <&xhci_port1>; + linux,default-trigger = "usbport"; + }; + + }; + + gpio-keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + restart { + label = "Reset"; + linux,code = <KEY_RESTART>; + gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&usb3 { + vcc-gpio = <&chipcommon 18 GPIO_ACTIVE_HIGH>; +}; + +&spi_nor { + status = "okay"; +}; -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply related [flat|nested] 6+ messages in thread
[parent not found: <1507563983-7354-2-git-send-email-riproute-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>]
* Re: [PATCH 2/2] ARM: dts: BCM5301X: Add DT for Luxul ABR-4500 [not found] ` <1507563983-7354-2-git-send-email-riproute-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> @ 2017-10-09 16:51 ` Rafał Miłecki 2017-10-09 19:44 ` Florian Fainelli 1 sibling, 0 replies; 6+ messages in thread From: Rafał Miłecki @ 2017-10-09 16:51 UTC (permalink / raw) To: Dan Haab Cc: Florian Fainelli, Hauke Mehrtens, Jon Mason, bcm-kernel-feedback-list, Rob Herring, Mark Rutland, Russell King, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org, devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, Dan Haab On 9 October 2017 at 17:46, Dan Haab <riproute-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> wrote: > From: Dan Haab <dhaab-RSK6WAzFx3QAvxtiuMwx3w@public.gmane.org> > > This is BCM47094 (AKA BCM4709C0) based router with rear-facing ports > board design. > > Signed-off-by: Dan Haab <dhaab-RSK6WAzFx3QAvxtiuMwx3w@public.gmane.org> Acked-by: Rafał Miłecki <rafal-g1n6cQUeyibVItvQsEIGlw@public.gmane.org> -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH 2/2] ARM: dts: BCM5301X: Add DT for Luxul ABR-4500 [not found] ` <1507563983-7354-2-git-send-email-riproute-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> 2017-10-09 16:51 ` Rafał Miłecki @ 2017-10-09 19:44 ` Florian Fainelli 1 sibling, 0 replies; 6+ messages in thread From: Florian Fainelli @ 2017-10-09 19:44 UTC (permalink / raw) To: bcm-kernel-feedback-list-dY08KVG/lbpWk0Htik3J/w, Dan Haab Cc: Rafał Miłecki, Hauke Mehrtens, Jon Mason, Rob Herring, Mark Rutland, Russell King, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, devicetree-u79uwXL29TY76Z2rM5mHXA, Dan Haab On Mon, 9 Oct 2017 09:46:23 -0600, Dan Haab <riproute-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> wrote: > From: Dan Haab <dhaab-RSK6WAzFx3QAvxtiuMwx3w@public.gmane.org> > > This is BCM47094 (AKA BCM4709C0) based router with rear-facing ports > board design. > > Signed-off-by: Dan Haab <dhaab-RSK6WAzFx3QAvxtiuMwx3w@public.gmane.org> > --- Applied to devicetree/next, thanks! -- Florian -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH 1/2] ARM: dts: BCM5301X: Add DT for Luxul XBR-4500 [not found] ` <1507563983-7354-1-git-send-email-riproute-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> 2017-10-09 15:46 ` [PATCH 2/2] ARM: dts: BCM5301X: Add DT for Luxul ABR-4500 Dan Haab @ 2017-10-09 16:50 ` Rafał Miłecki 2017-10-09 19:44 ` Florian Fainelli 2 siblings, 0 replies; 6+ messages in thread From: Rafał Miłecki @ 2017-10-09 16:50 UTC (permalink / raw) To: Dan Haab Cc: Florian Fainelli, Hauke Mehrtens, Jon Mason, bcm-kernel-feedback-list, Rob Herring, Mark Rutland, Russell King, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org, devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, Dan Haab On 9 October 2017 at 17:46, Dan Haab <riproute-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> wrote: > From: Dan Haab <dhaab-RSK6WAzFx3QAvxtiuMwx3w@public.gmane.org> > > This is BCM47094 (AKA BCM4709C0) based router with ports-on-the-front > board design. > > Signed-off-by: Dan Haab <dhaab-RSK6WAzFx3QAvxtiuMwx3w@public.gmane.org> Acked-by: Rafał Miłecki <rafal-g1n6cQUeyibVItvQsEIGlw@public.gmane.org> -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH 1/2] ARM: dts: BCM5301X: Add DT for Luxul XBR-4500 [not found] ` <1507563983-7354-1-git-send-email-riproute-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> 2017-10-09 15:46 ` [PATCH 2/2] ARM: dts: BCM5301X: Add DT for Luxul ABR-4500 Dan Haab 2017-10-09 16:50 ` [PATCH 1/2] ARM: dts: BCM5301X: Add DT for Luxul XBR-4500 Rafał Miłecki @ 2017-10-09 19:44 ` Florian Fainelli 2 siblings, 0 replies; 6+ messages in thread From: Florian Fainelli @ 2017-10-09 19:44 UTC (permalink / raw) To: bcm-kernel-feedback-list-dY08KVG/lbpWk0Htik3J/w, Dan Haab Cc: Rafał Miłecki, Hauke Mehrtens, Jon Mason, Rob Herring, Mark Rutland, Russell King, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, devicetree-u79uwXL29TY76Z2rM5mHXA, Dan Haab On Mon, 9 Oct 2017 09:46:22 -0600, Dan Haab <riproute-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> wrote: > From: Dan Haab <dhaab-RSK6WAzFx3QAvxtiuMwx3w@public.gmane.org> > > This is BCM47094 (AKA BCM4709C0) based router with ports-on-the-front > board design. > > Signed-off-by: Dan Haab <dhaab-RSK6WAzFx3QAvxtiuMwx3w@public.gmane.org> > --- Applied to devicetree/next, thanks! -- Florian -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2017-10-09 19:44 UTC | newest] Thread overview: 6+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2017-10-09 15:46 [PATCH 1/2] ARM: dts: BCM5301X: Add DT for Luxul XBR-4500 Dan Haab [not found] ` <1507563983-7354-1-git-send-email-riproute-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> 2017-10-09 15:46 ` [PATCH 2/2] ARM: dts: BCM5301X: Add DT for Luxul ABR-4500 Dan Haab [not found] ` <1507563983-7354-2-git-send-email-riproute-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> 2017-10-09 16:51 ` Rafał Miłecki 2017-10-09 19:44 ` Florian Fainelli 2017-10-09 16:50 ` [PATCH 1/2] ARM: dts: BCM5301X: Add DT for Luxul XBR-4500 Rafał Miłecki 2017-10-09 19:44 ` Florian Fainelli
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).