From: Chen-Yu Tsai <wens-jdAy2FN1RRM@public.gmane.org>
To: Maxime Ripard
<maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>,
David Airlie <airlied-cv59FeDIM0c@public.gmane.org>,
Rob Herring <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
Mark Rutland <mark.rutland-5wv7dgnIgG8@public.gmane.org>
Cc: Chen-Yu Tsai <wens-jdAy2FN1RRM@public.gmane.org>,
dri-devel-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org
Subject: [PATCH v4 03/11] drm/sun4i: hdmi: Disable clks in bind function error path and unbind function
Date: Tue, 10 Oct 2017 11:20:00 +0800 [thread overview]
Message-ID: <20171010032008.682-4-wens@csie.org> (raw)
In-Reply-To: <20171010032008.682-1-wens-jdAy2FN1RRM@public.gmane.org>
The HDMI driver enables the bus and mod clocks in the bind function, but
does not disable them if it then bails our due to any errors. Neither
does it disable the clocks in the unbind function.
Fix this by adding a proper error path to the bind function, and
clk_disable_unprepare calls to the unbind function.
Also rename the err_cleanup_connector label to err_cleanup_encoder,
since it is the encoder that gets cleaned up.
Fixes: 9c5681011a0c ("drm/sun4i: Add HDMI support")
Signed-off-by: Chen-Yu Tsai <wens-jdAy2FN1RRM@public.gmane.org>
Acked-by: Maxime Ripard <maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>
---
drivers/gpu/drm/sun4i/sun4i_hdmi_enc.c | 19 ++++++++++++++-----
1 file changed, 14 insertions(+), 5 deletions(-)
diff --git a/drivers/gpu/drm/sun4i/sun4i_hdmi_enc.c b/drivers/gpu/drm/sun4i/sun4i_hdmi_enc.c
index 9ea6cd5a1370..3cf1a6932fac 100644
--- a/drivers/gpu/drm/sun4i/sun4i_hdmi_enc.c
+++ b/drivers/gpu/drm/sun4i/sun4i_hdmi_enc.c
@@ -302,26 +302,29 @@ static int sun4i_hdmi_bind(struct device *dev, struct device *master,
hdmi->mod_clk = devm_clk_get(dev, "mod");
if (IS_ERR(hdmi->mod_clk)) {
dev_err(dev, "Couldn't get the HDMI mod clock\n");
- return PTR_ERR(hdmi->mod_clk);
+ ret = PTR_ERR(hdmi->mod_clk);
+ goto err_disable_bus_clk;
}
clk_prepare_enable(hdmi->mod_clk);
hdmi->pll0_clk = devm_clk_get(dev, "pll-0");
if (IS_ERR(hdmi->pll0_clk)) {
dev_err(dev, "Couldn't get the HDMI PLL 0 clock\n");
- return PTR_ERR(hdmi->pll0_clk);
+ ret = PTR_ERR(hdmi->pll0_clk);
+ goto err_disable_mod_clk;
}
hdmi->pll1_clk = devm_clk_get(dev, "pll-1");
if (IS_ERR(hdmi->pll1_clk)) {
dev_err(dev, "Couldn't get the HDMI PLL 1 clock\n");
- return PTR_ERR(hdmi->pll1_clk);
+ ret = PTR_ERR(hdmi->pll1_clk);
+ goto err_disable_mod_clk;
}
ret = sun4i_tmds_create(hdmi);
if (ret) {
dev_err(dev, "Couldn't create the TMDS clock\n");
- return ret;
+ goto err_disable_mod_clk;
}
writel(SUN4I_HDMI_CTRL_ENABLE, hdmi->base + SUN4I_HDMI_CTRL_REG);
@@ -362,7 +365,7 @@ static int sun4i_hdmi_bind(struct device *dev, struct device *master,
ret = sun4i_hdmi_i2c_create(dev, hdmi);
if (ret) {
dev_err(dev, "Couldn't create the HDMI I2C adapter\n");
- return ret;
+ goto err_disable_mod_clk;
}
drm_encoder_helper_add(&hdmi->encoder,
@@ -422,6 +425,10 @@ static int sun4i_hdmi_bind(struct device *dev, struct device *master,
drm_encoder_cleanup(&hdmi->encoder);
err_del_i2c_adapter:
i2c_del_adapter(hdmi->i2c);
+err_disable_mod_clk:
+ clk_disable_unprepare(hdmi->mod_clk);
+err_disable_bus_clk:
+ clk_disable_unprepare(hdmi->bus_clk);
return ret;
}
@@ -434,6 +441,8 @@ static void sun4i_hdmi_unbind(struct device *dev, struct device *master,
drm_connector_cleanup(&hdmi->connector);
drm_encoder_cleanup(&hdmi->encoder);
i2c_del_adapter(hdmi->i2c);
+ clk_disable_unprepare(hdmi->mod_clk);
+ clk_disable_unprepare(hdmi->bus_clk);
}
static const struct component_ops sun4i_hdmi_ops = {
--
2.14.2
next prev parent reply other threads:[~2017-10-10 3:20 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-10-10 3:19 [PATCH v4 00/11] drm/sun4i: hdmi: Support HDMI controller on A31 Chen-Yu Tsai
2017-10-10 3:19 ` [PATCH v4 01/11] drm/sun4i: tcon: Add variant callback for TCON output muxing Chen-Yu Tsai
[not found] ` <20171010032008.682-1-wens-jdAy2FN1RRM@public.gmane.org>
2017-10-10 3:19 ` [PATCH v4 02/11] drm/sun4i: tcon: Add support for demuxing TCON output on A31 Chen-Yu Tsai
[not found] ` <20171010032008.682-3-wens-jdAy2FN1RRM@public.gmane.org>
2017-10-11 10:09 ` [linux-sunxi] " Julian Calaby
2017-10-10 3:20 ` Chen-Yu Tsai [this message]
2017-10-10 3:20 ` [PATCH v4 04/11] drm/sun4i: hdmi: create a regmap for later use Chen-Yu Tsai
2017-10-10 3:20 ` [PATCH v4 05/11] drm/sun4i: hdmi: Allow using second PLL as TMDS clk parent Chen-Yu Tsai
2017-10-10 3:20 ` [PATCH v4 06/11] dt-bindings: display: sun4i: Add binding for A31 HDMI controller Chen-Yu Tsai
2017-10-10 3:20 ` [PATCH v4 07/11] drm/sun4i: hdmi: Add support for controller hardware variants Chen-Yu Tsai
2017-10-10 3:20 ` [PATCH v4 08/11] drm/sun4i: hdmi: Add A31 specific DDC register definitions Chen-Yu Tsai
2017-10-10 3:20 ` [PATCH v4 09/11] drm/sun4i: hdmi: Add support for A31's HDMI controller Chen-Yu Tsai
2017-10-10 3:20 ` [PATCH v4 10/11] ARM: dts: sun6i: Add device node for " Chen-Yu Tsai
2017-10-10 3:20 ` [PATCH v4 11/11] ARM: dts: sun6i: Enable HDMI support on some A31/A31s devices Chen-Yu Tsai
2017-10-11 8:00 ` [PATCH v4 00/11] drm/sun4i: hdmi: Support HDMI controller on A31 Maxime Ripard
[not found] ` <20171011080056.i2eodfsujdhcvxpi-ZC1Zs529Oq4@public.gmane.org>
2017-10-11 8:04 ` Chen-Yu Tsai
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20171010032008.682-4-wens@csie.org \
--to=wens-jday2fn1rrm@public.gmane.org \
--cc=airlied-cv59FeDIM0c@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=dri-devel-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org \
--cc=mark.rutland-5wv7dgnIgG8@public.gmane.org \
--cc=maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org \
--cc=robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).