Re: [PATCH 1/7] dt-bindings: bus: Minimal TI sysc interconnect target module binding

[Tony Lindgren <tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org>]

* Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org> [171010 08:47]:
> On Fri, Sep 29, 2017 at 03:34:05PM -0700, Tony Lindgren wrote:
> >  Documentation/devicetree/bindings/bus/ti-sysc.txt | 93 +++++++++++++++++++++++
> >  1 file changed, 93 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/bus/ti-sysc.txt
> 
> One typo below, otherwise:
> 
> Reviewed-by: Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
> 
> > diff --git a/Documentation/devicetree/bindings/bus/ti-sysc.txt b/Documentation/devicetree/bindings/bus/ti-sysc.txt
> > new file mode 100644
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/bus/ti-sysc.txt
> > @@ -0,0 +1,93 @@
> > +Texas Instruments sysc interconnect target module wrapper binding
> > +
> > +Texas Instruments SoCs can have a generic interconnect target module
> > +hardware for devices connected to various interconnects such as L3
> > +interconnect (Arteris NoC) and L4 interconnect (Sonics s3220). The sysc
> > +is mostly used for interaction between module and PRCM. It participates
> > +in the OCP Disconnect Protocol but other than that is mostly indepenent
> 
> s/indepenent/independent/
> 
> > +of the interconnect.

OK thanks for looking, will fix before applying.

Regards,

Tony
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html