Re: [Patch 1/6] ARM: dts: DRA72: Add CAL dtsi node

[Tony Lindgren <tony@atomide.com>]

* Benoit Parrot <bparrot@ti.com> [171012 12:29]:
> This patch adds the required dtsi node to support the Camera
> Adaptation Layer (CAL) for the DRA72 family of devices.
> 
> - Added CAL entry in dra72x.dtsi.
> 
> Signed-off-by: Benoit Parrot <bparrot@ti.com>
> ---
>  arch/arm/boot/dts/dra72x.dtsi | 31 +++++++++++++++++++++++++++++++
>  1 file changed, 31 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/dra72x.dtsi b/arch/arm/boot/dts/dra72x.dtsi
> index 67107605fb4c..d0ba4f238084 100644
> --- a/arch/arm/boot/dts/dra72x.dtsi
> +++ b/arch/arm/boot/dts/dra72x.dtsi
> @@ -17,6 +17,37 @@
>  		interrupt-parent = <&wakeupgen>;
>  		interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
>  	};
> +
> +	ocp {
> +		cal: cal@4845b000 {
> +			compatible = "ti,dra72-cal";
> +			ti,hwmods = "cal";
> +			reg = <0x4845B000 0x400>,
> +			      <0x4845B800 0x40>,
> +			      <0x4845B900 0x40>,
> +			      <0x4A002e94 0x4>;

Care to fix the cAmelcasing here? All lower case hex is pretty much the
standard with linux, so might as well lower case them all while at it.

Regards,

Tony