From: "Andreas Färber" <afaerber-l3A5Bk7waGM@public.gmane.org>
To: Thomas Gleixner <tglx-hfZtesqFncYOwBW4kG4KsQ@public.gmane.org>,
Jason Cooper <jason-NLaQJdtUoK4Be96aLqz0jA@public.gmane.org>,
Marc Zyngier <marc.zyngier-5wv7dgnIgG8@public.gmane.org>,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org
Cc: linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
Bizon <bizongod-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
"Roc He" <hepeng-qoVzM6YEWSw@public.gmane.org>,
蒋丽琴 <jiang.liqin-31gW8twSeR21Z/+hSey0Gg@public.gmane.org>,
"Andreas Färber" <afaerber-l3A5Bk7waGM@public.gmane.org>,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
"Andrew Lunn" <andrew-g2DYL2Zd6BY@public.gmane.org>
Subject: [PATCH v3 0/5] arm64: Realtek RTD1195/RTD1295 IRQ mux
Date: Tue, 17 Oct 2017 14:47:02 +0200 [thread overview]
Message-ID: <20171017124708.6242-1-afaerber@suse.de> (raw)
Hello,
This series adds two IRQ muxes for the Realtek RTD1295 and RTD1195 SoCs.
The implementation is based on register offsets seen in the vendor DT,
split up into two separate nodes, as well as code from QNAP's rtk119x and
Synology's RTD1293/96 GPL code dumps.
v3 does various cleanups, renames variables, reworks unmask vs. enable/disable
and adds an isr/scpu_int_en map as well as full RTD1195 support.
More experimental patches at:
https://github.com/afaerber/linux/commits/rtd1295-next
Have a lot of fun!
Cheers,
Andreas
v2 -> v3:
* Rebased, adding nodes to rtd129x.dtsi instead of rtd1295.dtsi
* Adopted {readl,writel}_relaxed() (Marc)
* Adopted spin_lock_irqsave() (Marc)
* Implemented RTD1195
* Implemented mapping for non-linear bits such as i2c3
v1 -> v2:
* Rebased, avoiding dependency on reset series for DT nodes
* Don't forward set_affinity to GIC (Marc)
* Added more spinlocks (Marc)
* Code cleanups
* Investigated quirk
* Fixed spinlock initialization (Andrew)
Cc: Thomas Gleixner <tglx-hfZtesqFncYOwBW4kG4KsQ@public.gmane.org>
Cc: Jason Cooper <jason-NLaQJdtUoK4Be96aLqz0jA@public.gmane.org>
Cc: Marc Zyngier <marc.zyngier-5wv7dgnIgG8@public.gmane.org>
Cc: Roc He <hepeng-qoVzM6YEWSw@public.gmane.org>
Cc: 蒋丽琴 <jiang.liqin-31gW8twSeR21Z/+hSey0Gg@public.gmane.org>
Cc: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Cc: Andrew Lunn <andrew-g2DYL2Zd6BY@public.gmane.org>
Andreas Färber (5):
dt-bindings: interrupt-controller: Add Realtek RTD1295
irqchip: Add Realtek RTD1295 mux driver
arm64: dts: realtek: Add irq mux to RTD129x
dt-bindings: interrupt-controller: Document RTD1195
irqchip: rtd119x: Add RTD1195 definitions
.../interrupt-controller/realtek,rtd119x-mux.txt | 25 ++
arch/arm64/boot/dts/realtek/rtd129x.dtsi | 22 ++
drivers/irqchip/Makefile | 1 +
drivers/irqchip/irq-rtd119x-mux.c | 388 +++++++++++++++++++++
4 files changed, 436 insertions(+)
create mode 100644 Documentation/devicetree/bindings/interrupt-controller/realtek,rtd119x-mux.txt
create mode 100644 drivers/irqchip/irq-rtd119x-mux.c
--
2.13.6
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next reply other threads:[~2017-10-17 12:47 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-10-17 12:47 Andreas Färber [this message]
2017-10-17 12:47 ` [PATCH v3 1/5] dt-bindings: interrupt-controller: Add Realtek RTD1295 Andreas Färber
[not found] ` <20171017124708.6242-1-afaerber-l3A5Bk7waGM@public.gmane.org>
2017-10-17 12:47 ` [PATCH v3 3/5] arm64: dts: realtek: Add irq mux to RTD129x Andreas Färber
2017-10-17 12:47 ` [PATCH v3 4/5] dt-bindings: interrupt-controller: Document RTD1195 Andreas Färber
[not found] ` <20171017124708.6242-5-afaerber-l3A5Bk7waGM@public.gmane.org>
2017-10-24 16:37 ` Rob Herring
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20171017124708.6242-1-afaerber@suse.de \
--to=afaerber-l3a5bk7wagm@public.gmane.org \
--cc=andrew-g2DYL2Zd6BY@public.gmane.org \
--cc=bizongod-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=hepeng-qoVzM6YEWSw@public.gmane.org \
--cc=jason-NLaQJdtUoK4Be96aLqz0jA@public.gmane.org \
--cc=jiang.liqin-31gW8twSeR21Z/+hSey0Gg@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=marc.zyngier-5wv7dgnIgG8@public.gmane.org \
--cc=tglx-hfZtesqFncYOwBW4kG4KsQ@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).