From: Ard Biesheuvel <ard.biesheuvel-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
To: marc.zyngier-5wv7dgnIgG8@public.gmane.org,
robin.murphy-5wv7dgnIgG8@public.gmane.org
Cc: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
daniel.thompson-vY8bQiOPoHsdnm+yROfE0A@public.gmane.org,
leif.lindholm-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org,
graeme.gregory-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org,
catalin.marinas-5wv7dgnIgG8@public.gmane.org,
will.deacon-5wv7dgnIgG8@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
Ard Biesheuvel
<ard.biesheuvel-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
Subject: [PATCH v5 3/3] drivers/irqchip: gicv3: add workaround for Synquacer pre-ITS
Date: Tue, 17 Oct 2017 17:55:56 +0100 [thread overview]
Message-ID: <20171017165556.30250-4-ard.biesheuvel@linaro.org> (raw)
In-Reply-To: <20171017165556.30250-1-ard.biesheuvel-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
The Socionext Synquacer SoC's implementation of GICv3 has a so-called
'pre-ITS', which maps 32-bit writes targeted at a separate window of
size '4 << device_id_bits' onto writes to GITS_TRANSLATER with device
ID taken from bits [device_id_bits + 1:2] of the window offset.
Writes that target GITS_TRANSLATER directly are reported as originating
from device ID #0.
So add a workaround for this. Given that this breaks isolation, clear
the IRQ_DOMAIN_FLAG_MSI_REMAP flag as well.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
---
Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.txt | 4 ++
arch/arm64/Kconfig | 8 +++
drivers/irqchip/irq-gic-v3-its.c | 72 +++++++++++++++++++-
3 files changed, 82 insertions(+), 2 deletions(-)
diff --git a/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.txt b/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.txt
index 4c29cdab0ea5..c3e6092f3add 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.txt
+++ b/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.txt
@@ -75,6 +75,10 @@ These nodes must have the following properties:
- reg: Specifies the base physical address and size of the ITS
registers.
+Optional:
+- socionext,synquacer-pre-its: (u32, u32) tuple describing the untranslated
+ address and size of the pre-ITS window.
+
The main GIC node must contain the appropriate #address-cells,
#size-cells and ranges properties for the reg property of all ITS
nodes.
diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
index 0df64a6a56d4..c4361dff2b74 100644
--- a/arch/arm64/Kconfig
+++ b/arch/arm64/Kconfig
@@ -539,6 +539,14 @@ config QCOM_QDF2400_ERRATUM_0065
If unsure, say Y.
+config SOCIONEXT_SYNQUACER_PREITS
+ bool "Socionext Synquacer: Workaround for GICv3 pre-ITS"
+ default y
+ help
+ Socionext Synquacer SoCs implement a separate h/w block to generate
+ MSI doorbell writes with non-zero values for the device ID.
+
+ If unsure, say Y.
endmenu
diff --git a/drivers/irqchip/irq-gic-v3-its.c b/drivers/irqchip/irq-gic-v3-its.c
index c34f21c7a38e..1172b8583db4 100644
--- a/drivers/irqchip/irq-gic-v3-its.c
+++ b/drivers/irqchip/irq-gic-v3-its.c
@@ -83,6 +83,8 @@ struct its_baser {
u32 psz;
};
+struct its_device;
+
/*
* The ITS structure - contains most of the infrastructure, with the
* top-level MSI domain, the command queue, the collections, and the
@@ -97,11 +99,15 @@ struct its_node {
struct its_cmd_block *cmd_write;
struct its_baser tables[GITS_BASER_NR_REGS];
struct its_collection *collections;
+ struct fwnode_handle *fwnode_handle;
+ u64 (*get_msi_base)(struct its_device *its_dev);
struct list_head its_device_list;
u64 flags;
u32 ite_size;
u32 device_ids;
int numa_node;
+ unsigned int msi_domain_flags;
+ u32 pre_its_base; /* for Socionext Synquacer */
bool is_v4;
};
@@ -1095,6 +1101,13 @@ static int its_set_affinity(struct irq_data *d, const struct cpumask *mask_val,
return IRQ_SET_MASK_OK_DONE;
}
+static u64 its_irq_get_msi_base(struct its_device *its_dev)
+{
+ struct its_node *its = its_dev->its;
+
+ return its->phys_base + GITS_TRANSLATER;
+}
+
static void its_irq_compose_msi_msg(struct irq_data *d, struct msi_msg *msg)
{
struct its_device *its_dev = irq_data_get_irq_chip_data(d);
@@ -1102,7 +1115,7 @@ static void its_irq_compose_msi_msg(struct irq_data *d, struct msi_msg *msg)
u64 addr;
its = its_dev->its;
- addr = its->phys_base + GITS_TRANSLATER;
+ addr = its->get_msi_base(its_dev);
msg->address_lo = lower_32_bits(addr);
msg->address_hi = upper_32_bits(addr);
@@ -2758,6 +2771,45 @@ static bool __maybe_unused its_enable_quirk_qdf2400_e0065(void *data)
return true;
}
+static u64 its_irq_get_msi_base_pre_its(struct its_device *its_dev)
+{
+ struct its_node *its = its_dev->its;
+
+ /*
+ * The Socionext Synquacer SoC has a so-called 'pre-ITS',
+ * which maps 32-bit writes targeted at a separate window of
+ * size '4 << device_id_bits' onto writes to GITS_TRANSLATER
+ * with device ID taken from bits [device_id_bits + 1:2] of
+ * the window offset.
+ */
+ return its->pre_its_base + (its_dev->device_id << 2);
+}
+
+static bool __maybe_unused its_enable_quirk_socionext_synquacer(void *data)
+{
+ struct its_node *its = data;
+ u32 pre_its_window[2];
+ u32 ids;
+
+ if (!fwnode_property_read_u32_array(its->fwnode_handle,
+ "socionext,synquacer-pre-its",
+ pre_its_window,
+ ARRAY_SIZE(pre_its_window))) {
+
+ its->pre_its_base = pre_its_window[0];
+ its->get_msi_base = its_irq_get_msi_base_pre_its;
+
+ ids = ilog2(pre_its_window[1]) - 2;
+ if (its->device_ids > ids)
+ its->device_ids = ids;
+
+ /* the pre-ITS breaks isolation, so disable MSI remapping */
+ its->msi_domain_flags &= ~IRQ_DOMAIN_FLAG_MSI_REMAP;
+ return true;
+ }
+ return false;
+}
+
static const struct gic_quirk its_quirks[] = {
#ifdef CONFIG_CAVIUM_ERRATUM_22375
{
@@ -2783,6 +2835,19 @@ static const struct gic_quirk its_quirks[] = {
.init = its_enable_quirk_qdf2400_e0065,
},
#endif
+#ifdef CONFIG_SOCIONEXT_SYNQUACER_PREITS
+ {
+ /*
+ * The Socionext Synquacer SoC incorporates ARM's own GIC-500
+ * implementation, but with a 'pre-ITS' added that requires
+ * special handling in software.
+ */
+ .desc = "ITS: Socionext Synquacer pre-ITS",
+ .iidr = 0x0001143b,
+ .mask = 0xffffffff,
+ .init = its_enable_quirk_socionext_synquacer,
+ },
+#endif
{
}
};
@@ -2811,7 +2876,7 @@ static int its_init_domain(struct fwnode_handle *handle, struct its_node *its)
inner_domain->parent = its_parent;
irq_domain_update_bus_token(inner_domain, DOMAIN_BUS_NEXUS);
- inner_domain->flags |= IRQ_DOMAIN_FLAG_MSI_REMAP;
+ inner_domain->flags |= its->msi_domain_flags;
info->ops = &its_msi_domain_ops;
info->data = its;
inner_domain->host_data = info;
@@ -2965,6 +3030,9 @@ static int __init its_probe_one(struct resource *res,
goto out_free_its;
}
its->cmd_write = its->cmd_base;
+ its->fwnode_handle = handle;
+ its->get_msi_base = its_irq_get_msi_base;
+ its->msi_domain_flags = IRQ_DOMAIN_FLAG_MSI_REMAP;
its_enable_quirks(its);
--
2.11.0
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2017-10-17 16:55 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-10-17 16:55 [PATCH v5 0/3] implement workaround for Socionext Synquacer pre-ITS Ard Biesheuvel
[not found] ` <20171017165556.30250-1-ard.biesheuvel-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
2017-10-17 16:55 ` [PATCH v5 1/3] drivers/irqchip: gicv3: probe device ID space before quirks handling Ard Biesheuvel
2017-10-17 16:55 ` [PATCH v5 2/3] drivers/irqchip: gic: make quirks matching conditional on init return value Ard Biesheuvel
2017-10-17 16:55 ` Ard Biesheuvel [this message]
[not found] ` <20171017165556.30250-4-ard.biesheuvel-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
2017-10-18 1:53 ` [PATCH v5 3/3] drivers/irqchip: gicv3: add workaround for Synquacer pre-ITS Rob Herring
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20171017165556.30250-4-ard.biesheuvel@linaro.org \
--to=ard.biesheuvel-qsej5fyqhm4dnm+yrofe0a@public.gmane.org \
--cc=catalin.marinas-5wv7dgnIgG8@public.gmane.org \
--cc=daniel.thompson-vY8bQiOPoHsdnm+yROfE0A@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=graeme.gregory-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
--cc=leif.lindholm-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=marc.zyngier-5wv7dgnIgG8@public.gmane.org \
--cc=robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=robin.murphy-5wv7dgnIgG8@public.gmane.org \
--cc=will.deacon-5wv7dgnIgG8@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).