* [PATCH] ARM: dts: imx53-tx53: fix interrupt flags
@ 2017-10-23 14:56 Lothar Waßmann
[not found] ` <1508770600-28496-1-git-send-email-LW-bxm8fMRDkQLDiMYJYoSAnRvVK+yQ3ZXh@public.gmane.org>
0 siblings, 1 reply; 2+ messages in thread
From: Lothar Waßmann @ 2017-10-23 14:56 UTC (permalink / raw)
To: Fabio Estevam, Mark Rutland, Rob Herring, Russell King,
Sascha Hauer, Shawn Guo, devicetree, linux-arm-kernel,
linux-kernel
Cc: Lothar Waßmann
Some interrupts properties are given '0' as the flags argument or no
flags argument at all.
Change them to use the appropriate interrupt flags.
Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de>
---
arch/arm/boot/dts/imx53-tx53-x03x.dts | 2 +-
arch/arm/boot/dts/imx53-tx53.dtsi | 4 ++--
2 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/arm/boot/dts/imx53-tx53-x03x.dts b/arch/arm/boot/dts/imx53-tx53-x03x.dts
index aa9ae84..eb5b452 100644
--- a/arch/arm/boot/dts/imx53-tx53-x03x.dts
+++ b/arch/arm/boot/dts/imx53-tx53-x03x.dts
@@ -254,7 +254,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_tsc2007>;
interrupt-parent = <&gpio3>;
- interrupts = <26 0>;
+ interrupts = <26 IRQ_TYPE_EDGE_FALLING>;
gpios = <&gpio3 26 GPIO_ACTIVE_LOW>;
ti,x-plate-ohms = <660>;
wakeup-source;
diff --git a/arch/arm/boot/dts/imx53-tx53.dtsi b/arch/arm/boot/dts/imx53-tx53.dtsi
index 8e10c47..71b58b6 100644
--- a/arch/arm/boot/dts/imx53-tx53.dtsi
+++ b/arch/arm/boot/dts/imx53-tx53.dtsi
@@ -227,7 +227,7 @@
phy0: ethernet-phy@0 {
interrupt-parent = <&gpio2>;
- interrupts = <4>;
+ interrupts = <4 IRQ_TYPE_EDGE_FALLING>;
device_type = "ethernet-phy";
};
};
@@ -247,7 +247,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ds1339>;
interrupt-parent = <&gpio4>;
- interrupts = <20 0>;
+ interrupts = <20 IRQ_TYPE_EDGE_FALLING>;
trickle-resistor-ohms = <250>;
trickle-diode-disable;
};
--
2.1.4
^ permalink raw reply related [flat|nested] 2+ messages in thread
* Re: [PATCH] ARM: dts: imx53-tx53: fix interrupt flags
[not found] ` <1508770600-28496-1-git-send-email-LW-bxm8fMRDkQLDiMYJYoSAnRvVK+yQ3ZXh@public.gmane.org>
@ 2017-10-24 6:24 ` Shawn Guo
0 siblings, 0 replies; 2+ messages in thread
From: Shawn Guo @ 2017-10-24 6:24 UTC (permalink / raw)
To: Lothar Waßmann
Cc: Fabio Estevam, Mark Rutland, Rob Herring, Russell King,
Sascha Hauer, devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-kernel-u79uwXL29TY76Z2rM5mHXA
On Mon, Oct 23, 2017 at 04:56:40PM +0200, Lothar Waßmann wrote:
> Some interrupts properties are given '0' as the flags argument or no
> flags argument at all.
> Change them to use the appropriate interrupt flags.
>
> Signed-off-by: Lothar Waßmann <LW-bxm8fMRDkQLDiMYJYoSAnRvVK+yQ3ZXh@public.gmane.org>
Applied, thanks.
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2017-10-24 6:24 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2017-10-23 14:56 [PATCH] ARM: dts: imx53-tx53: fix interrupt flags Lothar Waßmann
[not found] ` <1508770600-28496-1-git-send-email-LW-bxm8fMRDkQLDiMYJYoSAnRvVK+yQ3ZXh@public.gmane.org>
2017-10-24 6:24 ` Shawn Guo
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).