From: Leon Luo <leonl-+iDsysdzPxZTt5vwKEO50dBPR1lH4CV8@public.gmane.org>
To: mchehab-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
mark.rutland-5wv7dgnIgG8@public.gmane.org,
hans.verkuil-FYB4Gu1CFyUAvxtiuMwx3w@public.gmane.org,
sakari.ailus-VuQAYsv1563Yd54FQh9/CA@public.gmane.org
Cc: linux-media-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
leonl-+iDsysdzPxZTt5vwKEO50dBPR1lH4CV8@public.gmane.org,
soren.brinkmann-gjFFaj9aHVfQT0dZR+AlfA@public.gmane.org
Subject: [PATCH v9 1/2] media:imx274 device tree binding file
Date: Wed, 25 Oct 2017 23:51:02 -0700 [thread overview]
Message-ID: <20171026065103.28213-1-leonl@leopardimaging.com> (raw)
The binding file for imx274 CMOS sensor V4l2 driver
Signed-off-by: Leon Luo <leonl-+iDsysdzPxZTt5vwKEO50dBPR1lH4CV8@public.gmane.org>
Acked-by: Sören Brinkmann <soren.brinkmann-gjFFaj9aHVfQT0dZR+AlfA@public.gmane.org>
Acked-by: Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
---
v9:
- add an entry in MAINTAINERS
v8:
- no changes
v7:
- no changes
v6:
- no changes
v5:
- add 'port' and 'endpoint' information
v4:
- no changes
v3:
- remove redundant properties and references
- document 'reg' property
v2:
- no changes
---
.../devicetree/bindings/media/i2c/imx274.txt | 33 ++++++++++++++++++++++
MAINTAINERS | 8 ++++++
2 files changed, 41 insertions(+)
create mode 100644 Documentation/devicetree/bindings/media/i2c/imx274.txt
diff --git a/Documentation/devicetree/bindings/media/i2c/imx274.txt b/Documentation/devicetree/bindings/media/i2c/imx274.txt
new file mode 100644
index 000000000000..80f2e89568e1
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/imx274.txt
@@ -0,0 +1,33 @@
+* Sony 1/2.5-Inch 8.51Mp CMOS Digital Image Sensor
+
+The Sony imx274 is a 1/2.5-inch CMOS active pixel digital image sensor with
+an active array size of 3864H x 2202V. It is programmable through I2C
+interface. The I2C address is fixed to 0x1a as per sensor data sheet.
+Image data is sent through MIPI CSI-2, which is configured as 4 lanes
+at 1440 Mbps.
+
+
+Required Properties:
+- compatible: value should be "sony,imx274" for imx274 sensor
+- reg: I2C bus address of the device
+
+Optional Properties:
+- reset-gpios: Sensor reset GPIO
+
+The imx274 device node should contain one 'port' child node with
+an 'endpoint' subnode. For further reading on port node refer to
+Documentation/devicetree/bindings/media/video-interfaces.txt.
+
+Example:
+ sensor@1a {
+ compatible = "sony,imx274";
+ reg = <0x1a>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reset-gpios = <&gpio_sensor 0 0>;
+ port {
+ sensor_out: endpoint {
+ remote-endpoint = <&csiss_in>;
+ };
+ };
+ };
diff --git a/MAINTAINERS b/MAINTAINERS
index 90230fe020f3..b5927bd4fe1e 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -12486,6 +12486,14 @@ S: Maintained
F: drivers/ssb/
F: include/linux/ssb/
+SONY IMX274 SENSOR DRIVER
+M: Leon Luo <leonl-+iDsysdzPxZTt5vwKEO50dBPR1lH4CV8@public.gmane.org>
+L: linux-media-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
+T: git git://linuxtv.org/media_tree.git
+S: Maintained
+F: drivers/media/i2c/imx274.c
+F: Documentation/devicetree/bindings/media/i2c/imx274.txt
+
SONY MEMORYSTICK CARD SUPPORT
M: Alex Dubov <oakad-/E1597aS9LQAvxtiuMwx3w@public.gmane.org>
W: http://tifmxx.berlios.de/
--
2.14.0.rc1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next reply other threads:[~2017-10-26 6:51 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-10-26 6:51 Leon Luo [this message]
2017-10-26 6:51 ` [PATCH v9 2/2] media:imx274 V4l2 driver for Sony imx274 CMOS sensor Leon Luo
2017-11-03 4:36 ` Vishal Sagar
[not found] ` <DM2PR0201MB0685547EBAD0AF883C4BADD9A75D0-mGsVAZgi3o+bjIxu8aGtFxrHTHEw16jenBOFsp37pqbUKgpGm//BTAC/G2K4zDHf@public.gmane.org>
2017-11-03 6:08 ` Leon Luo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20171026065103.28213-1-leonl@leopardimaging.com \
--to=leonl-+idsysdzpxztt5vwkeo50dbpr1lh4cv8@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=hans.verkuil-FYB4Gu1CFyUAvxtiuMwx3w@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-media-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=mark.rutland-5wv7dgnIgG8@public.gmane.org \
--cc=mchehab-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=sakari.ailus-VuQAYsv1563Yd54FQh9/CA@public.gmane.org \
--cc=soren.brinkmann-gjFFaj9aHVfQT0dZR+AlfA@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).