[PATCH v4 1/2] dt-bindings: watchdog: Add Spreadtrum watchdog documentation

[PATCH v4 1/2] dt-bindings: watchdog: Add Spreadtrum watchdog documentation

[Eric Long]

This patch adds the documentation for Spreadtrum watchdog driver.

Signed-off-by: Eric Long <eric.long@spreadtrum.com>
Acked-by: Rob Herring <robh@kernel.org>
---
Changes since v3:
- No updates.

Changes since v2:
- Add acked tag from Rob.

Changes since v1:
- No updates.
---
 .../devicetree/bindings/watchdog/sprd-wdt.txt         | 19 +++++++++++++++++++
 1 file changed, 19 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/watchdog/sprd-wdt.txt

diff --git a/Documentation/devicetree/bindings/watchdog/sprd-wdt.txt b/Documentation/devicetree/bindings/watchdog/sprd-wdt.txt
new file mode 100644
index 0000000..aeaf3e0
--- /dev/null
+++ b/Documentation/devicetree/bindings/watchdog/sprd-wdt.txt
@@ -0,0 +1,19 @@
+Spreadtrum SoCs Watchdog timer
+
+Required properties:
+- compatible : Should be "sprd,sp9860-wdt".
+- reg : Specifies base physical address and size of the registers.
+- interrupts : Exactly one interrupt specifier.
+- timeout-sec : Contain the default watchdog timeout in seconds.
+- clock-names : Contain the input clock names.
+- clocks : Phandles to input clocks.
+
+Example:
+	watchdog: watchdog@40310000 {
+		compatible = "sprd,sp9860-wdt";
+		reg = <0 0x40310000 0 0x1000>;
+		interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+		timeout-sec = <12>;
+		clock-names = "enable", "rtc_enable";
+		clocks = <&clk_aon_apb_gates1 8>, <&clk_aon_apb_rtc_gates 9>;
+	};
-- 
1.9.1

[PATCH v4 2/2] watchdog: Add Spreadtrum watchdog driver

[Eric Long]

This patch adds the watchdog driver for Spreadtrum SC9860 platform.

Signed-off-by: Eric Long <eric.long-lxIno14LUO0EEoCn2XhGlw@public.gmane.org>
---
Changes since v3:
 - Update Kconfig SPRD_WATCHDOG help messages.
 - Correct the wrong spell words.
 - Rename SPRD_WDT_CNT_HIGH_VALUE as SPRD_WDT_CNT_HIGH_SHIFT.
 - Remove unused macor.
 - Update sprd_wdt_set_pretimeout() api.
 - Add wdt->wdd.timeout default value.
 - Use devm_watchdog_register_device() to register wdt device.
 - If module does not support NOWAYOUT, disable wdt when remove this driver.
 - Call sprd_wdt_disable() every wdt suspend.

Changes since v2:
 - Rename all the macors, add SPRD tag at the head of the macro names.
 - Rename SPRD_WDT_CLK as SPRD_WTC_CNT_STEP.
 - Remove the code which check timeout value at the wrong place.
 - Add min/max timeout value limit.
 - Remove set WDOG_HW_RUNNING status at sprd_wdt_enable().
 - Add timeout/pretimeout judgment when set them.
 - Support WATCHDOG_NOWAYOUT status.

Changes since v1:
 - Use pretimeout instead of own implementation.
 - Fix timeout loop when loading timeout values.
 - use the infrastructure to read and set "timeout-sec" property.
 - Add conditions when start or stop watchdog.
 - Change the position of enabling watchdog.
 - Other optimization.
---
 drivers/watchdog/Kconfig    |   8 +
 drivers/watchdog/Makefile   |   1 +
 drivers/watchdog/sprd_wdt.c | 420 ++++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 429 insertions(+)
 create mode 100644 drivers/watchdog/sprd_wdt.c

diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index c722cbf..3367a8c 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -787,6 +787,14 @@ config UNIPHIER_WATCHDOG
 	  To compile this driver as a module, choose M here: the
 	  module will be called uniphier_wdt.
 
+config SPRD_WATCHDOG
+	tristate "Spreadtrum watchdog support"
+	depends on ARCH_SPRD || COMPILE_TEST
+	select WATCHDOG_CORE
+	help
+	  Say Y here to include watchdog timer supported
+	  by Spreadtrum system.
+
 # AVR32 Architecture
 
 config AT32AP700X_WDT
diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
index 56adf9f..187cca2 100644
--- a/drivers/watchdog/Makefile
+++ b/drivers/watchdog/Makefile
@@ -87,6 +87,7 @@ obj-$(CONFIG_ASPEED_WATCHDOG) += aspeed_wdt.o
 obj-$(CONFIG_ZX2967_WATCHDOG) += zx2967_wdt.o
 obj-$(CONFIG_STM32_WATCHDOG) += stm32_iwdg.o
 obj-$(CONFIG_UNIPHIER_WATCHDOG) += uniphier_wdt.o
+obj-$(CONFIG_SPRD_WATCHDOG) += sprd_wdt.o
 
 # AVR32 Architecture
 obj-$(CONFIG_AT32AP700X_WDT) += at32ap700x_wdt.o
diff --git a/drivers/watchdog/sprd_wdt.c b/drivers/watchdog/sprd_wdt.c
new file mode 100644
index 0000000..f760a98
--- /dev/null
+++ b/drivers/watchdog/sprd_wdt.c
@@ -0,0 +1,420 @@
+/*
+ * Spreadtrum watchdog driver
+ * Copyright (C) 2017 Spreadtrum - http://www.spreadtrum.com
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+
+#include <linux/bitops.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/platform_device.h>
+#include <linux/watchdog.h>
+
+#define SPRD_WDT_LOAD_LOW		0x0
+#define SPRD_WDT_LOAD_HIGH		0x4
+#define SPRD_WDT_CTRL			0x8
+#define SPRD_WDT_INT_CLR		0xc
+#define SPRD_WDT_INT_RAW		0x10
+#define SPRD_WDT_INT_MSK		0x14
+#define SPRD_WDT_CNT_LOW		0x18
+#define SPRD_WDT_CNT_HIGH		0x1c
+#define SPRD_WDT_LOCK			0x20
+#define SPRD_WDT_IRQ_LOAD_LOW		0x2c
+#define SPRD_WDT_IRQ_LOAD_HIGH		0x30
+
+/* WDT_CTRL */
+#define SPRD_WDT_INT_EN_BIT		BIT(0)
+#define SPRD_WDT_CNT_EN_BIT		BIT(1)
+#define SPRD_WDT_NEW_VER_EN		BIT(2)
+#define SPRD_WDT_RST_EN_BIT		BIT(3)
+
+/* WDT_INT_CLR */
+#define SPRD_WDT_INT_CLEAR_BIT		BIT(0)
+#define SPRD_WDT_RST_CLEAR_BIT		BIT(3)
+
+/* WDT_INT_RAW */
+#define SPRD_WDT_INT_RAW_BIT		BIT(0)
+#define SPRD_WDT_RST_RAW_BIT		BIT(3)
+#define SPRD_WDT_LD_BUSY_BIT		BIT(4)
+
+/* 1s equal to 32768 counter steps */
+#define SPRD_WDT_CNT_STEP		32768
+
+#define SPRD_WDT_UNLOCK_KEY		0xe551
+#define SPRD_WDT_MIN_TIMEOUT		3
+#define SPRD_WDT_MAX_TIMEOUT		60
+
+#define SPRD_WDT_CNT_HIGH_SHIFT		16
+#define SPRD_WDT_LOW_VALUE_MASK		GENMASK(15, 0)
+#define SPRD_WDT_LOAD_TIMEOUT		1000
+
+struct sprd_wdt {
+	void __iomem *base;
+	struct watchdog_device wdd;
+	struct clk *enable;
+	struct clk *rtc_enable;
+	unsigned int irq;
+};
+
+static inline struct sprd_wdt *to_sprd_wdt(struct watchdog_device *wdd)
+{
+	return container_of(wdd, struct sprd_wdt, wdd);
+}
+
+static inline void sprd_wdt_lock(void __iomem *addr)
+{
+	writel_relaxed(0x0, addr + SPRD_WDT_LOCK);
+}
+
+static inline void sprd_wdt_unlock(void __iomem *addr)
+{
+	writel_relaxed(SPRD_WDT_UNLOCK_KEY, addr + SPRD_WDT_LOCK);
+}
+
+static inline bool sprd_wdt_is_running(struct sprd_wdt *wdt)
+{
+	u32 val;
+
+	val = readl_relaxed(wdt->base + SPRD_WDT_CTRL);
+	return val & SPRD_WDT_NEW_VER_EN;
+}
+
+static irqreturn_t sprd_wdt_isr(int irq, void *dev_id)
+{
+	struct sprd_wdt *wdt = (struct sprd_wdt *)dev_id;
+
+	sprd_wdt_unlock(wdt->base);
+	writel_relaxed(SPRD_WDT_INT_CLEAR_BIT, wdt->base + SPRD_WDT_INT_CLR);
+	sprd_wdt_lock(wdt->base);
+	watchdog_notify_pretimeout(&wdt->wdd);
+	return IRQ_HANDLED;
+}
+
+static u32 sprd_wdt_get_cnt_value(struct sprd_wdt *wdt)
+{
+	u32 val;
+
+	val = readl_relaxed(wdt->base + SPRD_WDT_CNT_HIGH) <<
+		SPRD_WDT_CNT_HIGH_SHIFT;
+	val |= readl_relaxed(wdt->base + SPRD_WDT_CNT_LOW) &
+		SPRD_WDT_LOW_VALUE_MASK;
+
+	return val;
+}
+
+static int sprd_wdt_load_value(struct sprd_wdt *wdt, u32 timeout,
+			       u32 pretimeout)
+{
+	u32 val, delay_cnt = 0;
+	u32 tmr_step = timeout * SPRD_WDT_CNT_STEP;
+	u32 prtmr_step = pretimeout * SPRD_WDT_CNT_STEP;
+
+	sprd_wdt_unlock(wdt->base);
+	writel_relaxed((tmr_step >> SPRD_WDT_CNT_HIGH_SHIFT) &
+		      SPRD_WDT_LOW_VALUE_MASK, wdt->base + SPRD_WDT_LOAD_HIGH);
+	writel_relaxed((tmr_step & SPRD_WDT_LOW_VALUE_MASK),
+		       wdt->base + SPRD_WDT_LOAD_LOW);
+	writel_relaxed((prtmr_step >> SPRD_WDT_CNT_HIGH_SHIFT) &
+			SPRD_WDT_LOW_VALUE_MASK,
+		       wdt->base + SPRD_WDT_IRQ_LOAD_HIGH);
+	writel_relaxed(prtmr_step & SPRD_WDT_LOW_VALUE_MASK,
+		       wdt->base + SPRD_WDT_IRQ_LOAD_LOW);
+	sprd_wdt_lock(wdt->base);
+
+	/*
+	 * Waiting the load value operation done,
+	 * it needs two or three RTC clock cycles.
+	 */
+	do {
+		val = readl_relaxed(wdt->base + SPRD_WDT_INT_RAW);
+		if (!(val & SPRD_WDT_LD_BUSY_BIT))
+			break;
+
+		cpu_relax();
+	} while (delay_cnt++ < SPRD_WDT_LOAD_TIMEOUT);
+
+	if (delay_cnt >= SPRD_WDT_LOAD_TIMEOUT)
+		return -EBUSY;
+	return 0;
+}
+
+static int sprd_wdt_enable(struct sprd_wdt *wdt)
+{
+	u32 val;
+	int ret;
+
+	ret = clk_prepare_enable(wdt->enable);
+	if (ret)
+		return ret;
+	ret = clk_prepare_enable(wdt->rtc_enable);
+	if (ret)
+		return ret;
+
+	sprd_wdt_unlock(wdt->base);
+	val = readl_relaxed(wdt->base + SPRD_WDT_CTRL);
+	val |= SPRD_WDT_NEW_VER_EN;
+	writel_relaxed(val, wdt->base + SPRD_WDT_CTRL);
+	sprd_wdt_lock(wdt->base);
+	return 0;
+}
+
+static void sprd_wdt_disable(struct sprd_wdt *wdt)
+{
+	sprd_wdt_unlock(wdt->base);
+	writel_relaxed(0x0, wdt->base + SPRD_WDT_CTRL);
+	sprd_wdt_lock(wdt->base);
+
+	clk_disable_unprepare(wdt->rtc_enable);
+	clk_disable_unprepare(wdt->enable);
+}
+
+static int sprd_wdt_start(struct watchdog_device *wdd)
+{
+	struct sprd_wdt *wdt = to_sprd_wdt(wdd);
+	u32 val;
+	int ret;
+
+	ret = sprd_wdt_load_value(wdt, wdd->timeout, wdd->pretimeout);
+	if (ret)
+		return ret;
+
+	sprd_wdt_unlock(wdt->base);
+	val = readl_relaxed(wdt->base + SPRD_WDT_CTRL);
+	val |= SPRD_WDT_CNT_EN_BIT | SPRD_WDT_INT_EN_BIT | SPRD_WDT_RST_EN_BIT;
+	writel_relaxed(val, wdt->base + SPRD_WDT_CTRL);
+	sprd_wdt_lock(wdt->base);
+	set_bit(WDOG_HW_RUNNING, &wdd->status);
+
+	return 0;
+}
+
+static int sprd_wdt_stop(struct watchdog_device *wdd)
+{
+	struct sprd_wdt *wdt = to_sprd_wdt(wdd);
+	u32 val;
+
+	sprd_wdt_unlock(wdt->base);
+	val = readl_relaxed(wdt->base + SPRD_WDT_CTRL);
+	val &= ~(SPRD_WDT_CNT_EN_BIT | SPRD_WDT_RST_EN_BIT |
+		SPRD_WDT_INT_EN_BIT);
+	writel_relaxed(val, wdt->base + SPRD_WDT_CTRL);
+	sprd_wdt_lock(wdt->base);
+	return 0;
+}
+
+static int sprd_wdt_set_timeout(struct watchdog_device *wdd,
+				u32 timeout)
+{
+	struct sprd_wdt *wdt = to_sprd_wdt(wdd);
+
+	if (timeout == wdd->timeout)
+		return 0;
+
+	wdd->timeout = timeout;
+
+	return sprd_wdt_load_value(wdt, timeout, wdd->pretimeout);
+}
+
+static int sprd_wdt_set_pretimeout(struct watchdog_device *wdd,
+				   u32 new_pretimeout)
+{
+	struct sprd_wdt *wdt = to_sprd_wdt(wdd);
+
+	if (new_pretimeout < wdd->min_timeout)
+		return -EINVAL;
+
+	wdd->pretimeout = new_pretimeout;
+
+	return sprd_wdt_load_value(wdt, wdd->timeout, new_pretimeout);
+}
+
+static u32 sprd_wdt_get_timeleft(struct watchdog_device *wdd)
+{
+	struct sprd_wdt *wdt = to_sprd_wdt(wdd);
+	u32 val;
+
+	val = sprd_wdt_get_cnt_value(wdt);
+	val = val / SPRD_WDT_CNT_STEP;
+
+	return val;
+}
+
+static const struct watchdog_ops sprd_wdt_ops = {
+	.owner = THIS_MODULE,
+	.start = sprd_wdt_start,
+	.stop = sprd_wdt_stop,
+	.set_timeout = sprd_wdt_set_timeout,
+	.set_pretimeout = sprd_wdt_set_pretimeout,
+	.get_timeleft = sprd_wdt_get_timeleft,
+};
+
+static const struct watchdog_info sprd_wdt_info = {
+	.options = WDIOF_SETTIMEOUT |
+		   WDIOF_PRETIMEOUT |
+		   WDIOF_MAGICCLOSE |
+		   WDIOF_KEEPALIVEPING,
+	.identity = "Spreadtrum Watchdog Timer",
+};
+
+static int sprd_wdt_probe(struct platform_device *pdev)
+{
+	struct resource *wdt_res;
+	struct sprd_wdt *wdt;
+	int ret;
+
+	wdt = devm_kzalloc(&pdev->dev, sizeof(*wdt), GFP_KERNEL);
+	if (!wdt)
+		return -ENOMEM;
+
+	wdt_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	wdt->base = devm_ioremap_resource(&pdev->dev, wdt_res);
+	if (IS_ERR(wdt->base)) {
+		dev_err(&pdev->dev, "failed to map memory resource\n");
+		return PTR_ERR(wdt->base);
+	}
+
+	wdt->enable = devm_clk_get(&pdev->dev, "enable");
+	if (IS_ERR(wdt->enable)) {
+		dev_err(&pdev->dev, "can't get the enable clock\n");
+		return PTR_ERR(wdt->enable);
+	}
+
+	wdt->rtc_enable = devm_clk_get(&pdev->dev, "rtc_enable");
+	if (IS_ERR(wdt->rtc_enable)) {
+		dev_err(&pdev->dev, "can't get the rtc enable clock\n");
+		return PTR_ERR(wdt->rtc_enable);
+	}
+
+	wdt->irq = platform_get_irq(pdev, 0);
+	if (wdt->irq < 0) {
+		dev_err(&pdev->dev, "failed to get IRQ resource\n");
+		return wdt->irq;
+	}
+
+	ret = devm_request_irq(&pdev->dev, wdt->irq, sprd_wdt_isr,
+			       IRQF_NO_SUSPEND, "sprd-wdt", (void *)wdt);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to register irq\n");
+		return ret;
+	}
+
+	wdt->wdd.info = &sprd_wdt_info;
+	wdt->wdd.ops = &sprd_wdt_ops;
+	wdt->wdd.parent = &pdev->dev;
+	wdt->wdd.min_timeout = SPRD_WDT_MIN_TIMEOUT;
+	wdt->wdd.max_timeout = SPRD_WDT_MAX_TIMEOUT;
+	wdt->wdd.timeout = SPRD_WDT_MAX_TIMEOUT;
+
+	ret = sprd_wdt_enable(wdt);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to enable wdt\n");
+		return ret;
+	}
+
+	watchdog_set_nowayout(&wdt->wdd, WATCHDOG_NOWAYOUT);
+	watchdog_init_timeout(&wdt->wdd, 0, &pdev->dev);
+
+	ret = devm_watchdog_register_device(&pdev->dev, &wdt->wdd);
+	if (ret) {
+		sprd_wdt_disable(wdt);
+		dev_err(&pdev->dev, "failed to register watchdog\n");
+		return ret;
+	}
+	platform_set_drvdata(pdev, wdt);
+
+	return 0;
+}
+
+static int sprd_wdt_remove(struct platform_device *pdev)
+{
+	struct sprd_wdt *wdt = platform_get_drvdata(pdev);
+
+	/*
+	 * If set WDOG_NO_WAY_OUT bit, do not need disable wdt and
+	 * just let the system reboot when removing watchdog device.
+	 * Otherwise stop and disable the watchdog.
+	 */
+	if (!test_bit(WDOG_NO_WAY_OUT, &wdt->wdd.status)) {
+		if (watchdog_active(&wdt->wdd))
+			sprd_wdt_stop(&wdt->wdd);
+		sprd_wdt_disable(wdt);
+		return 0;
+	}
+
+	if (sprd_wdt_is_running(wdt))
+		dev_crit(&pdev->dev, "Device removed: Expect reboot!\n");
+	return 0;
+}
+
+static int __maybe_unused sprd_wdt_pm_suspend(struct device *dev)
+{
+	struct watchdog_device *wdd = dev_get_drvdata(dev);
+	struct sprd_wdt *wdt = dev_get_drvdata(dev);
+
+	if (watchdog_active(wdd))
+		sprd_wdt_stop(&wdt->wdd);
+	sprd_wdt_disable(wdt);
+
+	return 0;
+}
+
+static int __maybe_unused sprd_wdt_pm_resume(struct device *dev)
+{
+	struct watchdog_device *wdd = dev_get_drvdata(dev);
+	struct sprd_wdt *wdt = dev_get_drvdata(dev);
+	int ret;
+
+	ret = sprd_wdt_enable(wdt);
+	if (ret)
+		return ret;
+
+	if (watchdog_active(wdd)) {
+		ret = sprd_wdt_start(&wdt->wdd);
+		if (ret) {
+			sprd_wdt_disable(wdt);
+			return ret;
+		}
+	}
+
+	return 0;
+}
+
+static const struct dev_pm_ops sprd_wdt_pm_ops = {
+	SET_SYSTEM_SLEEP_PM_OPS(sprd_wdt_pm_suspend,
+				sprd_wdt_pm_resume)
+};
+
+static const struct of_device_id sprd_wdt_match_table[] = {
+	{ .compatible = "sprd,sp9860-wdt", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, sprd_wdt_match_table);
+
+static struct platform_driver sprd_watchdog_driver = {
+	.probe	= sprd_wdt_probe,
+	.remove	= sprd_wdt_remove,
+	.driver	= {
+		.name = "sprd-wdt",
+		.of_match_table = sprd_wdt_match_table,
+		.pm = &sprd_wdt_pm_ops,
+	},
+};
+module_platform_driver(sprd_watchdog_driver);
+
+MODULE_AUTHOR("Eric Long <eric.long-lxIno14LUO0EEoCn2XhGlw@public.gmane.org>");
+MODULE_DESCRIPTION("Spreadtrum Watchdog Timer Controller Driver");
+MODULE_LICENSE("GPL v2");
-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe linux-watchdog" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH v4 2/2] watchdog: Add Spreadtrum watchdog driver

[Guenter Roeck]

On 10/31/2017 01:16 AM, Eric Long wrote:
> This patch adds the watchdog driver for Spreadtrum SC9860 platform.
> 
> Signed-off-by: Eric Long <eric.long-lxIno14LUO0EEoCn2XhGlw@public.gmane.org>
> ---
> Changes since v3:
>   - Update Kconfig SPRD_WATCHDOG help messages.
>   - Correct the wrong spell words.
>   - Rename SPRD_WDT_CNT_HIGH_VALUE as SPRD_WDT_CNT_HIGH_SHIFT.
>   - Remove unused macor.
>   - Update sprd_wdt_set_pretimeout() api.
>   - Add wdt->wdd.timeout default value.
>   - Use devm_watchdog_register_device() to register wdt device.
>   - If module does not support NOWAYOUT, disable wdt when remove this driver.
>   - Call sprd_wdt_disable() every wdt suspend.
> 
> Changes since v2:
>   - Rename all the macors, add SPRD tag at the head of the macro names.
>   - Rename SPRD_WDT_CLK as SPRD_WTC_CNT_STEP.
>   - Remove the code which check timeout value at the wrong place.
>   - Add min/max timeout value limit.
>   - Remove set WDOG_HW_RUNNING status at sprd_wdt_enable().
>   - Add timeout/pretimeout judgment when set them.
>   - Support WATCHDOG_NOWAYOUT status.
> 
> Changes since v1:
>   - Use pretimeout instead of own implementation.
>   - Fix timeout loop when loading timeout values.
>   - use the infrastructure to read and set "timeout-sec" property.
>   - Add conditions when start or stop watchdog.
>   - Change the position of enabling watchdog.
>   - Other optimization.
> ---
>   drivers/watchdog/Kconfig    |   8 +
>   drivers/watchdog/Makefile   |   1 +
>   drivers/watchdog/sprd_wdt.c | 420 ++++++++++++++++++++++++++++++++++++++++++++
>   3 files changed, 429 insertions(+)
>   create mode 100644 drivers/watchdog/sprd_wdt.c
> 
> diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
> index c722cbf..3367a8c 100644
> --- a/drivers/watchdog/Kconfig
> +++ b/drivers/watchdog/Kconfig
> @@ -787,6 +787,14 @@ config UNIPHIER_WATCHDOG
>   	  To compile this driver as a module, choose M here: the
>   	  module will be called uniphier_wdt.
>   
> +config SPRD_WATCHDOG
> +	tristate "Spreadtrum watchdog support"
> +	depends on ARCH_SPRD || COMPILE_TEST
> +	select WATCHDOG_CORE
> +	help
> +	  Say Y here to include watchdog timer supported
> +	  by Spreadtrum system.
> +
>   # AVR32 Architecture
>   
>   config AT32AP700X_WDT
> diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
> index 56adf9f..187cca2 100644
> --- a/drivers/watchdog/Makefile
> +++ b/drivers/watchdog/Makefile
> @@ -87,6 +87,7 @@ obj-$(CONFIG_ASPEED_WATCHDOG) += aspeed_wdt.o
>   obj-$(CONFIG_ZX2967_WATCHDOG) += zx2967_wdt.o
>   obj-$(CONFIG_STM32_WATCHDOG) += stm32_iwdg.o
>   obj-$(CONFIG_UNIPHIER_WATCHDOG) += uniphier_wdt.o
> +obj-$(CONFIG_SPRD_WATCHDOG) += sprd_wdt.o
>   
>   # AVR32 Architecture
>   obj-$(CONFIG_AT32AP700X_WDT) += at32ap700x_wdt.o
> diff --git a/drivers/watchdog/sprd_wdt.c b/drivers/watchdog/sprd_wdt.c
> new file mode 100644
> index 0000000..f760a98
> --- /dev/null
> +++ b/drivers/watchdog/sprd_wdt.c
> @@ -0,0 +1,420 @@
> +/*
> + * Spreadtrum watchdog driver
> + * Copyright (C) 2017 Spreadtrum - http://www.spreadtrum.com
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License
> + * version 2 as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful, but
> + * WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
> + * General Public License for more details.
> + */
> +
> +#include <linux/bitops.h>
> +#include <linux/clk.h>
> +#include <linux/err.h>
> +#include <linux/interrupt.h>
> +#include <linux/io.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/of_address.h>
> +#include <linux/platform_device.h>
> +#include <linux/watchdog.h>
> +
> +#define SPRD_WDT_LOAD_LOW		0x0
> +#define SPRD_WDT_LOAD_HIGH		0x4
> +#define SPRD_WDT_CTRL			0x8
> +#define SPRD_WDT_INT_CLR		0xc
> +#define SPRD_WDT_INT_RAW		0x10
> +#define SPRD_WDT_INT_MSK		0x14
> +#define SPRD_WDT_CNT_LOW		0x18
> +#define SPRD_WDT_CNT_HIGH		0x1c
> +#define SPRD_WDT_LOCK			0x20
> +#define SPRD_WDT_IRQ_LOAD_LOW		0x2c
> +#define SPRD_WDT_IRQ_LOAD_HIGH		0x30
> +
> +/* WDT_CTRL */
> +#define SPRD_WDT_INT_EN_BIT		BIT(0)
> +#define SPRD_WDT_CNT_EN_BIT		BIT(1)
> +#define SPRD_WDT_NEW_VER_EN		BIT(2)
> +#define SPRD_WDT_RST_EN_BIT		BIT(3)
> +
> +/* WDT_INT_CLR */
> +#define SPRD_WDT_INT_CLEAR_BIT		BIT(0)
> +#define SPRD_WDT_RST_CLEAR_BIT		BIT(3)
> +
> +/* WDT_INT_RAW */
> +#define SPRD_WDT_INT_RAW_BIT		BIT(0)
> +#define SPRD_WDT_RST_RAW_BIT		BIT(3)
> +#define SPRD_WDT_LD_BUSY_BIT		BIT(4)
> +
> +/* 1s equal to 32768 counter steps */
> +#define SPRD_WDT_CNT_STEP		32768
> +
> +#define SPRD_WDT_UNLOCK_KEY		0xe551
> +#define SPRD_WDT_MIN_TIMEOUT		3
> +#define SPRD_WDT_MAX_TIMEOUT		60
> +
> +#define SPRD_WDT_CNT_HIGH_SHIFT		16
> +#define SPRD_WDT_LOW_VALUE_MASK		GENMASK(15, 0)
> +#define SPRD_WDT_LOAD_TIMEOUT		1000
> +
> +struct sprd_wdt {
> +	void __iomem *base;
> +	struct watchdog_device wdd;
> +	struct clk *enable;
> +	struct clk *rtc_enable;
> +	unsigned int irq;
> +};
> +
> +static inline struct sprd_wdt *to_sprd_wdt(struct watchdog_device *wdd)
> +{
> +	return container_of(wdd, struct sprd_wdt, wdd);
> +}
> +
> +static inline void sprd_wdt_lock(void __iomem *addr)
> +{
> +	writel_relaxed(0x0, addr + SPRD_WDT_LOCK);
> +}
> +
> +static inline void sprd_wdt_unlock(void __iomem *addr)
> +{
> +	writel_relaxed(SPRD_WDT_UNLOCK_KEY, addr + SPRD_WDT_LOCK);
> +}
> +
> +static inline bool sprd_wdt_is_running(struct sprd_wdt *wdt)
> +{
> +	u32 val;
> +
> +	val = readl_relaxed(wdt->base + SPRD_WDT_CTRL);
> +	return val & SPRD_WDT_NEW_VER_EN;
> +}
> +
> +static irqreturn_t sprd_wdt_isr(int irq, void *dev_id)
> +{
> +	struct sprd_wdt *wdt = (struct sprd_wdt *)dev_id;
> +
> +	sprd_wdt_unlock(wdt->base);
> +	writel_relaxed(SPRD_WDT_INT_CLEAR_BIT, wdt->base + SPRD_WDT_INT_CLR);
> +	sprd_wdt_lock(wdt->base);
> +	watchdog_notify_pretimeout(&wdt->wdd);
> +	return IRQ_HANDLED;
> +}
> +
> +static u32 sprd_wdt_get_cnt_value(struct sprd_wdt *wdt)
> +{
> +	u32 val;
> +
> +	val = readl_relaxed(wdt->base + SPRD_WDT_CNT_HIGH) <<
> +		SPRD_WDT_CNT_HIGH_SHIFT;
> +	val |= readl_relaxed(wdt->base + SPRD_WDT_CNT_LOW) &
> +		SPRD_WDT_LOW_VALUE_MASK;
> +
> +	return val;
> +}
> +
> +static int sprd_wdt_load_value(struct sprd_wdt *wdt, u32 timeout,
> +			       u32 pretimeout)
> +{
> +	u32 val, delay_cnt = 0;
> +	u32 tmr_step = timeout * SPRD_WDT_CNT_STEP;
> +	u32 prtmr_step = pretimeout * SPRD_WDT_CNT_STEP;
> +
> +	sprd_wdt_unlock(wdt->base);
> +	writel_relaxed((tmr_step >> SPRD_WDT_CNT_HIGH_SHIFT) &
> +		      SPRD_WDT_LOW_VALUE_MASK, wdt->base + SPRD_WDT_LOAD_HIGH);
> +	writel_relaxed((tmr_step & SPRD_WDT_LOW_VALUE_MASK),
> +		       wdt->base + SPRD_WDT_LOAD_LOW);
> +	writel_relaxed((prtmr_step >> SPRD_WDT_CNT_HIGH_SHIFT) &
> +			SPRD_WDT_LOW_VALUE_MASK,
> +		       wdt->base + SPRD_WDT_IRQ_LOAD_HIGH);
> +	writel_relaxed(prtmr_step & SPRD_WDT_LOW_VALUE_MASK,
> +		       wdt->base + SPRD_WDT_IRQ_LOAD_LOW);
> +	sprd_wdt_lock(wdt->base);
> +
> +	/*
> +	 * Waiting the load value operation done,
> +	 * it needs two or three RTC clock cycles.
> +	 */
> +	do {
> +		val = readl_relaxed(wdt->base + SPRD_WDT_INT_RAW);
> +		if (!(val & SPRD_WDT_LD_BUSY_BIT))
> +			break;
> +
> +		cpu_relax();
> +	} while (delay_cnt++ < SPRD_WDT_LOAD_TIMEOUT);
> +
> +	if (delay_cnt >= SPRD_WDT_LOAD_TIMEOUT)
> +		return -EBUSY;
> +	return 0;
> +}
> +
> +static int sprd_wdt_enable(struct sprd_wdt *wdt)
> +{
> +	u32 val;
> +	int ret;
> +
> +	ret = clk_prepare_enable(wdt->enable);
> +	if (ret)
> +		return ret;
> +	ret = clk_prepare_enable(wdt->rtc_enable);
> +	if (ret)
> +		return ret;
> +
> +	sprd_wdt_unlock(wdt->base);
> +	val = readl_relaxed(wdt->base + SPRD_WDT_CTRL);
> +	val |= SPRD_WDT_NEW_VER_EN;
> +	writel_relaxed(val, wdt->base + SPRD_WDT_CTRL);
> +	sprd_wdt_lock(wdt->base);
> +	return 0;
> +}
> +
> +static void sprd_wdt_disable(struct sprd_wdt *wdt)
> +{
> +	sprd_wdt_unlock(wdt->base);
> +	writel_relaxed(0x0, wdt->base + SPRD_WDT_CTRL);
> +	sprd_wdt_lock(wdt->base);
> +
> +	clk_disable_unprepare(wdt->rtc_enable);
> +	clk_disable_unprepare(wdt->enable);
> +}
> +
> +static int sprd_wdt_start(struct watchdog_device *wdd)
> +{
> +	struct sprd_wdt *wdt = to_sprd_wdt(wdd);
> +	u32 val;
> +	int ret;
> +
> +	ret = sprd_wdt_load_value(wdt, wdd->timeout, wdd->pretimeout);
> +	if (ret)
> +		return ret;
> +
> +	sprd_wdt_unlock(wdt->base);
> +	val = readl_relaxed(wdt->base + SPRD_WDT_CTRL);
> +	val |= SPRD_WDT_CNT_EN_BIT | SPRD_WDT_INT_EN_BIT | SPRD_WDT_RST_EN_BIT;
> +	writel_relaxed(val, wdt->base + SPRD_WDT_CTRL);
> +	sprd_wdt_lock(wdt->base);
> +	set_bit(WDOG_HW_RUNNING, &wdd->status);
> +
> +	return 0;
> +}
> +
> +static int sprd_wdt_stop(struct watchdog_device *wdd)
> +{
> +	struct sprd_wdt *wdt = to_sprd_wdt(wdd);
> +	u32 val;
> +
> +	sprd_wdt_unlock(wdt->base);
> +	val = readl_relaxed(wdt->base + SPRD_WDT_CTRL);
> +	val &= ~(SPRD_WDT_CNT_EN_BIT | SPRD_WDT_RST_EN_BIT |
> +		SPRD_WDT_INT_EN_BIT);
> +	writel_relaxed(val, wdt->base + SPRD_WDT_CTRL);
> +	sprd_wdt_lock(wdt->base);
> +	return 0;
> +}
> +
> +static int sprd_wdt_set_timeout(struct watchdog_device *wdd,
> +				u32 timeout)
> +{
> +	struct sprd_wdt *wdt = to_sprd_wdt(wdd);
> +
> +	if (timeout == wdd->timeout)
> +		return 0;
> +
> +	wdd->timeout = timeout;
> +
> +	return sprd_wdt_load_value(wdt, timeout, wdd->pretimeout);
> +}
> +
> +static int sprd_wdt_set_pretimeout(struct watchdog_device *wdd,
> +				   u32 new_pretimeout)
> +{
> +	struct sprd_wdt *wdt = to_sprd_wdt(wdd);
> +
> +	if (new_pretimeout < wdd->min_timeout)
> +		return -EINVAL;
> +
> +	wdd->pretimeout = new_pretimeout;
> +
> +	return sprd_wdt_load_value(wdt, wdd->timeout, new_pretimeout);
> +}
> +
> +static u32 sprd_wdt_get_timeleft(struct watchdog_device *wdd)
> +{
> +	struct sprd_wdt *wdt = to_sprd_wdt(wdd);
> +	u32 val;
> +
> +	val = sprd_wdt_get_cnt_value(wdt);
> +	val = val / SPRD_WDT_CNT_STEP;
> +
> +	return val;
> +}
> +
> +static const struct watchdog_ops sprd_wdt_ops = {
> +	.owner = THIS_MODULE,
> +	.start = sprd_wdt_start,
> +	.stop = sprd_wdt_stop,
> +	.set_timeout = sprd_wdt_set_timeout,
> +	.set_pretimeout = sprd_wdt_set_pretimeout,
> +	.get_timeleft = sprd_wdt_get_timeleft,
> +};
> +
> +static const struct watchdog_info sprd_wdt_info = {
> +	.options = WDIOF_SETTIMEOUT |
> +		   WDIOF_PRETIMEOUT |
> +		   WDIOF_MAGICCLOSE |
> +		   WDIOF_KEEPALIVEPING,
> +	.identity = "Spreadtrum Watchdog Timer",
> +};
> +
> +static int sprd_wdt_probe(struct platform_device *pdev)
> +{
> +	struct resource *wdt_res;
> +	struct sprd_wdt *wdt;
> +	int ret;
> +
> +	wdt = devm_kzalloc(&pdev->dev, sizeof(*wdt), GFP_KERNEL);
> +	if (!wdt)
> +		return -ENOMEM;
> +
> +	wdt_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> +	wdt->base = devm_ioremap_resource(&pdev->dev, wdt_res);
> +	if (IS_ERR(wdt->base)) {
> +		dev_err(&pdev->dev, "failed to map memory resource\n");
> +		return PTR_ERR(wdt->base);
> +	}
> +
> +	wdt->enable = devm_clk_get(&pdev->dev, "enable");
> +	if (IS_ERR(wdt->enable)) {
> +		dev_err(&pdev->dev, "can't get the enable clock\n");
> +		return PTR_ERR(wdt->enable);
> +	}
> +
> +	wdt->rtc_enable = devm_clk_get(&pdev->dev, "rtc_enable");
> +	if (IS_ERR(wdt->rtc_enable)) {
> +		dev_err(&pdev->dev, "can't get the rtc enable clock\n");
> +		return PTR_ERR(wdt->rtc_enable);
> +	}
> +
> +	wdt->irq = platform_get_irq(pdev, 0);
> +	if (wdt->irq < 0) {
> +		dev_err(&pdev->dev, "failed to get IRQ resource\n");
> +		return wdt->irq;
> +	}
> +
> +	ret = devm_request_irq(&pdev->dev, wdt->irq, sprd_wdt_isr,
> +			       IRQF_NO_SUSPEND, "sprd-wdt", (void *)wdt);
> +	if (ret) {
> +		dev_err(&pdev->dev, "failed to register irq\n");
> +		return ret;
> +	}
> +
> +	wdt->wdd.info = &sprd_wdt_info;
> +	wdt->wdd.ops = &sprd_wdt_ops;
> +	wdt->wdd.parent = &pdev->dev;
> +	wdt->wdd.min_timeout = SPRD_WDT_MIN_TIMEOUT;
> +	wdt->wdd.max_timeout = SPRD_WDT_MAX_TIMEOUT;
> +	wdt->wdd.timeout = SPRD_WDT_MAX_TIMEOUT;
> +
> +	ret = sprd_wdt_enable(wdt);
> +	if (ret) {
> +		dev_err(&pdev->dev, "failed to enable wdt\n");
> +		return ret;
> +	}
> +
> +	watchdog_set_nowayout(&wdt->wdd, WATCHDOG_NOWAYOUT);
> +	watchdog_init_timeout(&wdt->wdd, 0, &pdev->dev);
> +
> +	ret = devm_watchdog_register_device(&pdev->dev, &wdt->wdd);
> +	if (ret) {
> +		sprd_wdt_disable(wdt);
> +		dev_err(&pdev->dev, "failed to register watchdog\n");
> +		return ret;
> +	}
> +	platform_set_drvdata(pdev, wdt);
> +
> +	return 0;
> +}
> +
> +static int sprd_wdt_remove(struct platform_device *pdev)
> +{
> +	struct sprd_wdt *wdt = platform_get_drvdata(pdev);
> +
> +	/*
> +	 * If set WDOG_NO_WAY_OUT bit, do not need disable wdt and
> +	 * just let the system reboot when removing watchdog device.
> +	 * Otherwise stop and disable the watchdog.
> +	 */
> +	if (!test_bit(WDOG_NO_WAY_OUT, &wdt->wdd.status)) {
> +		if (watchdog_active(&wdt->wdd))
> +			sprd_wdt_stop(&wdt->wdd);
> +		sprd_wdt_disable(wdt);
> +		return 0;
> +	}
> +
> +	if (sprd_wdt_is_running(wdt))
> +		dev_crit(&pdev->dev, "Device removed: Expect reboot!\n");

Can you trigger this message ?

If the watchdog is running, the watchdog core will not release the device,
and the remove function should not be called. So I am curious to understand
if/how it is possible to get into the situation where you can see the message.

Thanks,
Guenter

> +	return 0;
> +}
> +
> +static int __maybe_unused sprd_wdt_pm_suspend(struct device *dev)
> +{
> +	struct watchdog_device *wdd = dev_get_drvdata(dev);
> +	struct sprd_wdt *wdt = dev_get_drvdata(dev);
> +
> +	if (watchdog_active(wdd))
> +		sprd_wdt_stop(&wdt->wdd);
> +	sprd_wdt_disable(wdt);
> +
> +	return 0;
> +}
> +
> +static int __maybe_unused sprd_wdt_pm_resume(struct device *dev)
> +{
> +	struct watchdog_device *wdd = dev_get_drvdata(dev);
> +	struct sprd_wdt *wdt = dev_get_drvdata(dev);
> +	int ret;
> +
> +	ret = sprd_wdt_enable(wdt);
> +	if (ret)
> +		return ret;
> +
> +	if (watchdog_active(wdd)) {
> +		ret = sprd_wdt_start(&wdt->wdd);
> +		if (ret) {
> +			sprd_wdt_disable(wdt);
> +			return ret;
> +		}
> +	}
> +
> +	return 0;
> +}
> +
> +static const struct dev_pm_ops sprd_wdt_pm_ops = {
> +	SET_SYSTEM_SLEEP_PM_OPS(sprd_wdt_pm_suspend,
> +				sprd_wdt_pm_resume)
> +};
> +
> +static const struct of_device_id sprd_wdt_match_table[] = {
> +	{ .compatible = "sprd,sp9860-wdt", },
> +	{},
> +};
> +MODULE_DEVICE_TABLE(of, sprd_wdt_match_table);
> +
> +static struct platform_driver sprd_watchdog_driver = {
> +	.probe	= sprd_wdt_probe,
> +	.remove	= sprd_wdt_remove,
> +	.driver	= {
> +		.name = "sprd-wdt",
> +		.of_match_table = sprd_wdt_match_table,
> +		.pm = &sprd_wdt_pm_ops,
> +	},
> +};
> +module_platform_driver(sprd_watchdog_driver);
> +
> +MODULE_AUTHOR("Eric Long <eric.long-lxIno14LUO0EEoCn2XhGlw@public.gmane.org>");
> +MODULE_DESCRIPTION("Spreadtrum Watchdog Timer Controller Driver");
> +MODULE_LICENSE("GPL v2");
> 

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH v4 2/2] watchdog: Add Spreadtrum watchdog driver

[Eric Long]

On Wed, Nov 01, 2017 at 01:46:36PM +0000, Guenter Roeck wrote:
> On 10/31/2017 01:16 AM, Eric Long wrote:
> > This patch adds the watchdog driver for Spreadtrum SC9860 platform.
> > 
> > Signed-off-by: Eric Long <eric.long-lxIno14LUO0EEoCn2XhGlw@public.gmane.org>
> > ---
> > Changes since v3:
> >   - Update Kconfig SPRD_WATCHDOG help messages.
> >   - Correct the wrong spell words.
> >   - Rename SPRD_WDT_CNT_HIGH_VALUE as SPRD_WDT_CNT_HIGH_SHIFT.
> >   - Remove unused macor.
> >   - Update sprd_wdt_set_pretimeout() api.
> >   - Add wdt->wdd.timeout default value.
> >   - Use devm_watchdog_register_device() to register wdt device.
> >   - If module does not support NOWAYOUT, disable wdt when remove this driver.
> >   - Call sprd_wdt_disable() every wdt suspend.
> > 
> > Changes since v2:
> >   - Rename all the macors, add SPRD tag at the head of the macro names.
> >   - Rename SPRD_WDT_CLK as SPRD_WTC_CNT_STEP.
> >   - Remove the code which check timeout value at the wrong place.
> >   - Add min/max timeout value limit.
> >   - Remove set WDOG_HW_RUNNING status at sprd_wdt_enable().
> >   - Add timeout/pretimeout judgment when set them.
> >   - Support WATCHDOG_NOWAYOUT status.
> > 
> > Changes since v1:
> >   - Use pretimeout instead of own implementation.
> >   - Fix timeout loop when loading timeout values.
> >   - use the infrastructure to read and set "timeout-sec" property.
> >   - Add conditions when start or stop watchdog.
> >   - Change the position of enabling watchdog.
> >   - Other optimization.
> > ---
> >   drivers/watchdog/Kconfig    |   8 +
> >   drivers/watchdog/Makefile   |   1 +
> >   drivers/watchdog/sprd_wdt.c | 420 ++++++++++++++++++++++++++++++++++++++++++++
> >   3 files changed, 429 insertions(+)
> >   create mode 100644 drivers/watchdog/sprd_wdt.c
> > 
> > diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
> > index c722cbf..3367a8c 100644
> > --- a/drivers/watchdog/Kconfig
> > +++ b/drivers/watchdog/Kconfig
> > @@ -787,6 +787,14 @@ config UNIPHIER_WATCHDOG
> >   	  To compile this driver as a module, choose M here: the
> >   	  module will be called uniphier_wdt.
> >   
> > +config SPRD_WATCHDOG
> > +	tristate "Spreadtrum watchdog support"
> > +	depends on ARCH_SPRD || COMPILE_TEST
> > +	select WATCHDOG_CORE
> > +	help
> > +	  Say Y here to include watchdog timer supported
> > +	  by Spreadtrum system.
> > +
> >   # AVR32 Architecture
> >   
> >   config AT32AP700X_WDT
> > diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
> > index 56adf9f..187cca2 100644
> > --- a/drivers/watchdog/Makefile
> > +++ b/drivers/watchdog/Makefile
> > @@ -87,6 +87,7 @@ obj-$(CONFIG_ASPEED_WATCHDOG) += aspeed_wdt.o
> >   obj-$(CONFIG_ZX2967_WATCHDOG) += zx2967_wdt.o
> >   obj-$(CONFIG_STM32_WATCHDOG) += stm32_iwdg.o
> >   obj-$(CONFIG_UNIPHIER_WATCHDOG) += uniphier_wdt.o
> > +obj-$(CONFIG_SPRD_WATCHDOG) += sprd_wdt.o
> >   
> >   # AVR32 Architecture
> >   obj-$(CONFIG_AT32AP700X_WDT) += at32ap700x_wdt.o
> > diff --git a/drivers/watchdog/sprd_wdt.c b/drivers/watchdog/sprd_wdt.c
> > new file mode 100644
> > index 0000000..f760a98
> > --- /dev/null
> > +++ b/drivers/watchdog/sprd_wdt.c
> > @@ -0,0 +1,420 @@
> > +/*
> > + * Spreadtrum watchdog driver
> > + * Copyright (C) 2017 Spreadtrum - http://www.spreadtrum.com
> > + *
> > + * This program is free software; you can redistribute it and/or
> > + * modify it under the terms of the GNU General Public License
> > + * version 2 as published by the Free Software Foundation.
> > + *
> > + * This program is distributed in the hope that it will be useful, but
> > + * WITHOUT ANY WARRANTY; without even the implied warranty of
> > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
> > + * General Public License for more details.
> > + */
> > +
> > +#include <linux/bitops.h>
> > +#include <linux/clk.h>
> > +#include <linux/err.h>
> > +#include <linux/interrupt.h>
> > +#include <linux/io.h>
> > +#include <linux/kernel.h>
> > +#include <linux/module.h>
> > +#include <linux/of.h>
> > +#include <linux/of_address.h>
> > +#include <linux/platform_device.h>
> > +#include <linux/watchdog.h>
> > +
> > +#define SPRD_WDT_LOAD_LOW		0x0
> > +#define SPRD_WDT_LOAD_HIGH		0x4
> > +#define SPRD_WDT_CTRL			0x8
> > +#define SPRD_WDT_INT_CLR		0xc
> > +#define SPRD_WDT_INT_RAW		0x10
> > +#define SPRD_WDT_INT_MSK		0x14
> > +#define SPRD_WDT_CNT_LOW		0x18
> > +#define SPRD_WDT_CNT_HIGH		0x1c
> > +#define SPRD_WDT_LOCK			0x20
> > +#define SPRD_WDT_IRQ_LOAD_LOW		0x2c
> > +#define SPRD_WDT_IRQ_LOAD_HIGH		0x30
> > +
> > +/* WDT_CTRL */
> > +#define SPRD_WDT_INT_EN_BIT		BIT(0)
> > +#define SPRD_WDT_CNT_EN_BIT		BIT(1)
> > +#define SPRD_WDT_NEW_VER_EN		BIT(2)
> > +#define SPRD_WDT_RST_EN_BIT		BIT(3)
> > +
> > +/* WDT_INT_CLR */
> > +#define SPRD_WDT_INT_CLEAR_BIT		BIT(0)
> > +#define SPRD_WDT_RST_CLEAR_BIT		BIT(3)
> > +
> > +/* WDT_INT_RAW */
> > +#define SPRD_WDT_INT_RAW_BIT		BIT(0)
> > +#define SPRD_WDT_RST_RAW_BIT		BIT(3)
> > +#define SPRD_WDT_LD_BUSY_BIT		BIT(4)
> > +
> > +/* 1s equal to 32768 counter steps */
> > +#define SPRD_WDT_CNT_STEP		32768
> > +
> > +#define SPRD_WDT_UNLOCK_KEY		0xe551
> > +#define SPRD_WDT_MIN_TIMEOUT		3
> > +#define SPRD_WDT_MAX_TIMEOUT		60
> > +
> > +#define SPRD_WDT_CNT_HIGH_SHIFT		16
> > +#define SPRD_WDT_LOW_VALUE_MASK		GENMASK(15, 0)
> > +#define SPRD_WDT_LOAD_TIMEOUT		1000
> > +
> > +struct sprd_wdt {
> > +	void __iomem *base;
> > +	struct watchdog_device wdd;
> > +	struct clk *enable;
> > +	struct clk *rtc_enable;
> > +	unsigned int irq;
> > +};
> > +
> > +static inline struct sprd_wdt *to_sprd_wdt(struct watchdog_device *wdd)
> > +{
> > +	return container_of(wdd, struct sprd_wdt, wdd);
> > +}
> > +
> > +static inline void sprd_wdt_lock(void __iomem *addr)
> > +{
> > +	writel_relaxed(0x0, addr + SPRD_WDT_LOCK);
> > +}
> > +
> > +static inline void sprd_wdt_unlock(void __iomem *addr)
> > +{
> > +	writel_relaxed(SPRD_WDT_UNLOCK_KEY, addr + SPRD_WDT_LOCK);
> > +}
> > +
> > +static inline bool sprd_wdt_is_running(struct sprd_wdt *wdt)
> > +{
> > +	u32 val;
> > +
> > +	val = readl_relaxed(wdt->base + SPRD_WDT_CTRL);
> > +	return val & SPRD_WDT_NEW_VER_EN;
> > +}
> > +
> > +static irqreturn_t sprd_wdt_isr(int irq, void *dev_id)
> > +{
> > +	struct sprd_wdt *wdt = (struct sprd_wdt *)dev_id;
> > +
> > +	sprd_wdt_unlock(wdt->base);
> > +	writel_relaxed(SPRD_WDT_INT_CLEAR_BIT, wdt->base + SPRD_WDT_INT_CLR);
> > +	sprd_wdt_lock(wdt->base);
> > +	watchdog_notify_pretimeout(&wdt->wdd);
> > +	return IRQ_HANDLED;
> > +}
> > +
> > +static u32 sprd_wdt_get_cnt_value(struct sprd_wdt *wdt)
> > +{
> > +	u32 val;
> > +
> > +	val = readl_relaxed(wdt->base + SPRD_WDT_CNT_HIGH) <<
> > +		SPRD_WDT_CNT_HIGH_SHIFT;
> > +	val |= readl_relaxed(wdt->base + SPRD_WDT_CNT_LOW) &
> > +		SPRD_WDT_LOW_VALUE_MASK;
> > +
> > +	return val;
> > +}
> > +
> > +static int sprd_wdt_load_value(struct sprd_wdt *wdt, u32 timeout,
> > +			       u32 pretimeout)
> > +{
> > +	u32 val, delay_cnt = 0;
> > +	u32 tmr_step = timeout * SPRD_WDT_CNT_STEP;
> > +	u32 prtmr_step = pretimeout * SPRD_WDT_CNT_STEP;
> > +
> > +	sprd_wdt_unlock(wdt->base);
> > +	writel_relaxed((tmr_step >> SPRD_WDT_CNT_HIGH_SHIFT) &
> > +		      SPRD_WDT_LOW_VALUE_MASK, wdt->base + SPRD_WDT_LOAD_HIGH);
> > +	writel_relaxed((tmr_step & SPRD_WDT_LOW_VALUE_MASK),
> > +		       wdt->base + SPRD_WDT_LOAD_LOW);
> > +	writel_relaxed((prtmr_step >> SPRD_WDT_CNT_HIGH_SHIFT) &
> > +			SPRD_WDT_LOW_VALUE_MASK,
> > +		       wdt->base + SPRD_WDT_IRQ_LOAD_HIGH);
> > +	writel_relaxed(prtmr_step & SPRD_WDT_LOW_VALUE_MASK,
> > +		       wdt->base + SPRD_WDT_IRQ_LOAD_LOW);
> > +	sprd_wdt_lock(wdt->base);
> > +
> > +	/*
> > +	 * Waiting the load value operation done,
> > +	 * it needs two or three RTC clock cycles.
> > +	 */
> > +	do {
> > +		val = readl_relaxed(wdt->base + SPRD_WDT_INT_RAW);
> > +		if (!(val & SPRD_WDT_LD_BUSY_BIT))
> > +			break;
> > +
> > +		cpu_relax();
> > +	} while (delay_cnt++ < SPRD_WDT_LOAD_TIMEOUT);
> > +
> > +	if (delay_cnt >= SPRD_WDT_LOAD_TIMEOUT)
> > +		return -EBUSY;
> > +	return 0;
> > +}
> > +
> > +static int sprd_wdt_enable(struct sprd_wdt *wdt)
> > +{
> > +	u32 val;
> > +	int ret;
> > +
> > +	ret = clk_prepare_enable(wdt->enable);
> > +	if (ret)
> > +		return ret;
> > +	ret = clk_prepare_enable(wdt->rtc_enable);
> > +	if (ret)
> > +		return ret;
> > +
> > +	sprd_wdt_unlock(wdt->base);
> > +	val = readl_relaxed(wdt->base + SPRD_WDT_CTRL);
> > +	val |= SPRD_WDT_NEW_VER_EN;
> > +	writel_relaxed(val, wdt->base + SPRD_WDT_CTRL);
> > +	sprd_wdt_lock(wdt->base);
> > +	return 0;
> > +}
> > +
> > +static void sprd_wdt_disable(struct sprd_wdt *wdt)
> > +{
> > +	sprd_wdt_unlock(wdt->base);
> > +	writel_relaxed(0x0, wdt->base + SPRD_WDT_CTRL);
> > +	sprd_wdt_lock(wdt->base);
> > +
> > +	clk_disable_unprepare(wdt->rtc_enable);
> > +	clk_disable_unprepare(wdt->enable);
> > +}
> > +
> > +static int sprd_wdt_start(struct watchdog_device *wdd)
> > +{
> > +	struct sprd_wdt *wdt = to_sprd_wdt(wdd);
> > +	u32 val;
> > +	int ret;
> > +
> > +	ret = sprd_wdt_load_value(wdt, wdd->timeout, wdd->pretimeout);
> > +	if (ret)
> > +		return ret;
> > +
> > +	sprd_wdt_unlock(wdt->base);
> > +	val = readl_relaxed(wdt->base + SPRD_WDT_CTRL);
> > +	val |= SPRD_WDT_CNT_EN_BIT | SPRD_WDT_INT_EN_BIT | SPRD_WDT_RST_EN_BIT;
> > +	writel_relaxed(val, wdt->base + SPRD_WDT_CTRL);
> > +	sprd_wdt_lock(wdt->base);
> > +	set_bit(WDOG_HW_RUNNING, &wdd->status);
> > +
> > +	return 0;
> > +}
> > +
> > +static int sprd_wdt_stop(struct watchdog_device *wdd)
> > +{
> > +	struct sprd_wdt *wdt = to_sprd_wdt(wdd);
> > +	u32 val;
> > +
> > +	sprd_wdt_unlock(wdt->base);
> > +	val = readl_relaxed(wdt->base + SPRD_WDT_CTRL);
> > +	val &= ~(SPRD_WDT_CNT_EN_BIT | SPRD_WDT_RST_EN_BIT |
> > +		SPRD_WDT_INT_EN_BIT);
> > +	writel_relaxed(val, wdt->base + SPRD_WDT_CTRL);
> > +	sprd_wdt_lock(wdt->base);
> > +	return 0;
> > +}
> > +
> > +static int sprd_wdt_set_timeout(struct watchdog_device *wdd,
> > +				u32 timeout)
> > +{
> > +	struct sprd_wdt *wdt = to_sprd_wdt(wdd);
> > +
> > +	if (timeout == wdd->timeout)
> > +		return 0;
> > +
> > +	wdd->timeout = timeout;
> > +
> > +	return sprd_wdt_load_value(wdt, timeout, wdd->pretimeout);
> > +}
> > +
> > +static int sprd_wdt_set_pretimeout(struct watchdog_device *wdd,
> > +				   u32 new_pretimeout)
> > +{
> > +	struct sprd_wdt *wdt = to_sprd_wdt(wdd);
> > +
> > +	if (new_pretimeout < wdd->min_timeout)
> > +		return -EINVAL;
> > +
> > +	wdd->pretimeout = new_pretimeout;
> > +
> > +	return sprd_wdt_load_value(wdt, wdd->timeout, new_pretimeout);
> > +}
> > +
> > +static u32 sprd_wdt_get_timeleft(struct watchdog_device *wdd)
> > +{
> > +	struct sprd_wdt *wdt = to_sprd_wdt(wdd);
> > +	u32 val;
> > +
> > +	val = sprd_wdt_get_cnt_value(wdt);
> > +	val = val / SPRD_WDT_CNT_STEP;
> > +
> > +	return val;
> > +}
> > +
> > +static const struct watchdog_ops sprd_wdt_ops = {
> > +	.owner = THIS_MODULE,
> > +	.start = sprd_wdt_start,
> > +	.stop = sprd_wdt_stop,
> > +	.set_timeout = sprd_wdt_set_timeout,
> > +	.set_pretimeout = sprd_wdt_set_pretimeout,
> > +	.get_timeleft = sprd_wdt_get_timeleft,
> > +};
> > +
> > +static const struct watchdog_info sprd_wdt_info = {
> > +	.options = WDIOF_SETTIMEOUT |
> > +		   WDIOF_PRETIMEOUT |
> > +		   WDIOF_MAGICCLOSE |
> > +		   WDIOF_KEEPALIVEPING,
> > +	.identity = "Spreadtrum Watchdog Timer",
> > +};
> > +
> > +static int sprd_wdt_probe(struct platform_device *pdev)
> > +{
> > +	struct resource *wdt_res;
> > +	struct sprd_wdt *wdt;
> > +	int ret;
> > +
> > +	wdt = devm_kzalloc(&pdev->dev, sizeof(*wdt), GFP_KERNEL);
> > +	if (!wdt)
> > +		return -ENOMEM;
> > +
> > +	wdt_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> > +	wdt->base = devm_ioremap_resource(&pdev->dev, wdt_res);
> > +	if (IS_ERR(wdt->base)) {
> > +		dev_err(&pdev->dev, "failed to map memory resource\n");
> > +		return PTR_ERR(wdt->base);
> > +	}
> > +
> > +	wdt->enable = devm_clk_get(&pdev->dev, "enable");
> > +	if (IS_ERR(wdt->enable)) {
> > +		dev_err(&pdev->dev, "can't get the enable clock\n");
> > +		return PTR_ERR(wdt->enable);
> > +	}
> > +
> > +	wdt->rtc_enable = devm_clk_get(&pdev->dev, "rtc_enable");
> > +	if (IS_ERR(wdt->rtc_enable)) {
> > +		dev_err(&pdev->dev, "can't get the rtc enable clock\n");
> > +		return PTR_ERR(wdt->rtc_enable);
> > +	}
> > +
> > +	wdt->irq = platform_get_irq(pdev, 0);
> > +	if (wdt->irq < 0) {
> > +		dev_err(&pdev->dev, "failed to get IRQ resource\n");
> > +		return wdt->irq;
> > +	}
> > +
> > +	ret = devm_request_irq(&pdev->dev, wdt->irq, sprd_wdt_isr,
> > +			       IRQF_NO_SUSPEND, "sprd-wdt", (void *)wdt);
> > +	if (ret) {
> > +		dev_err(&pdev->dev, "failed to register irq\n");
> > +		return ret;
> > +	}
> > +
> > +	wdt->wdd.info = &sprd_wdt_info;
> > +	wdt->wdd.ops = &sprd_wdt_ops;
> > +	wdt->wdd.parent = &pdev->dev;
> > +	wdt->wdd.min_timeout = SPRD_WDT_MIN_TIMEOUT;
> > +	wdt->wdd.max_timeout = SPRD_WDT_MAX_TIMEOUT;
> > +	wdt->wdd.timeout = SPRD_WDT_MAX_TIMEOUT;
> > +
> > +	ret = sprd_wdt_enable(wdt);
> > +	if (ret) {
> > +		dev_err(&pdev->dev, "failed to enable wdt\n");
> > +		return ret;
> > +	}
> > +
> > +	watchdog_set_nowayout(&wdt->wdd, WATCHDOG_NOWAYOUT);
> > +	watchdog_init_timeout(&wdt->wdd, 0, &pdev->dev);
> > +
> > +	ret = devm_watchdog_register_device(&pdev->dev, &wdt->wdd);
> > +	if (ret) {
> > +		sprd_wdt_disable(wdt);
> > +		dev_err(&pdev->dev, "failed to register watchdog\n");
> > +		return ret;
> > +	}
> > +	platform_set_drvdata(pdev, wdt);
> > +
> > +	return 0;
> > +}
> > +
> > +static int sprd_wdt_remove(struct platform_device *pdev)
> > +{
> > +	struct sprd_wdt *wdt = platform_get_drvdata(pdev);
> > +
> > +	/*
> > +	 * If set WDOG_NO_WAY_OUT bit, do not need disable wdt and
> > +	 * just let the system reboot when removing watchdog device.
> > +	 * Otherwise stop and disable the watchdog.
> > +	 */
> > +	if (!test_bit(WDOG_NO_WAY_OUT, &wdt->wdd.status)) {
> > +		if (watchdog_active(&wdt->wdd))
> > +			sprd_wdt_stop(&wdt->wdd);
> > +		sprd_wdt_disable(wdt);
> > +		return 0;
> > +	}
> > +
> > +	if (sprd_wdt_is_running(wdt))
> > +		dev_crit(&pdev->dev, "Device removed: Expect reboot!\n");
> 
> Can you trigger this message ?
> 
> If the watchdog is running, the watchdog core will not release the device,
> and the remove function should not be called. So I am curious to understand
> if/how it is possible to get into the situation where you can see the message.
>

Thanks for your comments, you are right.
If the watchdog is running, the watchdog core will call try_module_get() when it is
opened, it causes the device can not be unloaded. At first we just want to reboot
the system when someone removed the device, but now it can not hit our expect, so I 
would remove the sprd_wdt_remove() and add devm_add_action() in next patch.

> > +	return 0;
> > +}
> > +
> > +static int __maybe_unused sprd_wdt_pm_suspend(struct device *dev)
> > +{
> > +	struct watchdog_device *wdd = dev_get_drvdata(dev);
> > +	struct sprd_wdt *wdt = dev_get_drvdata(dev);
> > +
> > +	if (watchdog_active(wdd))
> > +		sprd_wdt_stop(&wdt->wdd);
> > +	sprd_wdt_disable(wdt);
> > +
> > +	return 0;
> > +}
> > +
> > +static int __maybe_unused sprd_wdt_pm_resume(struct device *dev)
> > +{
> > +	struct watchdog_device *wdd = dev_get_drvdata(dev);
> > +	struct sprd_wdt *wdt = dev_get_drvdata(dev);
> > +	int ret;
> > +
> > +	ret = sprd_wdt_enable(wdt);
> > +	if (ret)
> > +		return ret;
> > +
> > +	if (watchdog_active(wdd)) {
> > +		ret = sprd_wdt_start(&wdt->wdd);
> > +		if (ret) {
> > +			sprd_wdt_disable(wdt);
> > +			return ret;
> > +		}
> > +	}
> > +
> > +	return 0;
> > +}
> > +
> > +static const struct dev_pm_ops sprd_wdt_pm_ops = {
> > +	SET_SYSTEM_SLEEP_PM_OPS(sprd_wdt_pm_suspend,
> > +				sprd_wdt_pm_resume)
> > +};
> > +
> > +static const struct of_device_id sprd_wdt_match_table[] = {
> > +	{ .compatible = "sprd,sp9860-wdt", },
> > +	{},
> > +};
> > +MODULE_DEVICE_TABLE(of, sprd_wdt_match_table);
> > +
> > +static struct platform_driver sprd_watchdog_driver = {
> > +	.probe	= sprd_wdt_probe,
> > +	.remove	= sprd_wdt_remove,
> > +	.driver	= {
> > +		.name = "sprd-wdt",
> > +		.of_match_table = sprd_wdt_match_table,
> > +		.pm = &sprd_wdt_pm_ops,
> > +	},
> > +};
> > +module_platform_driver(sprd_watchdog_driver);
> > +
> > +MODULE_AUTHOR("Eric Long <eric.long-lxIno14LUO0EEoCn2XhGlw@public.gmane.org>");
> > +MODULE_DESCRIPTION("Spreadtrum Watchdog Timer Controller Driver");
> > +MODULE_LICENSE("GPL v2");
> > 
> 
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html