From mboxrd@z Thu Jan 1 00:00:00 1970 From: Sergey Matyukevich Subject: Re: [PATCH 1/2] arm64: dts: orange-pi-zero-plus2: fix sdcard detect Date: Mon, 6 Nov 2017 19:13:06 +0300 Message-ID: <20171106161306.tq6yeq6bq36ridj3@speedy.hunter> References: <20171103195855.15283-1-geomatsi@gmail.com> <20171103195855.15283-2-geomatsi@gmail.com> <20171104154221.ao7kkcwqhnja3cxe@speedy.hunter> <20171106122633.5mnqfh6xhmmxr45s@flea> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Return-path: Content-Disposition: inline In-Reply-To: <20171106122633.5mnqfh6xhmmxr45s@flea> Sender: devicetree-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: Maxime Ripard Cc: Jagan Teki , Chen-Yu Tsai , Rob Herring , Mark Rutland , devicetree , linux-arm-kernel List-Id: devicetree@vger.kernel.org Hello Maxime, > > > > The sdcard detect pin on orange-pi-zero-plus2 is pulled up. > > > > Fix cd-gpio description to enable sdcard detect. > > > > > > > > Signed-off-by: Sergey Matyukevich > > > > --- > > > > arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus2.dts | 2 +- > > > > 1 file changed, 1 insertion(+), 1 deletion(-) > > > > > > > > diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus2.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus2.dts > > > > index b6b7a561df8c..a42fd79a62a3 100644 > > > > --- a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus2.dts > > > > +++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus2.dts > > > > @@ -71,7 +71,7 @@ > > > > pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>; > > > > vmmc-supply = <®_vcc3v3>; > > > > bus-width = <4>; > > > > - cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; > > > > + cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; > > > > > > Was able to detect and do mount with existing dts > > > > Did you try to boot from sdcard ? I am not able to boot my board from > > sd-card without this change. As I mentioned earlier in my email > > to buildroot mailing list, with mmc debug enabled I see that mmc > > tries to init sd-card when I remove it from the slot. > > > > Maybe there is a minor differences between h/w versions or batches ? > > What is you board version ? I tested on board v1.0. > > Looking at the schematics, it definitely looks like it's active low. Is it ok to merge it then ? Or using 'cd-inverted' property is the preferable option ? Regards, Sergey -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html