From mboxrd@z Thu Jan 1 00:00:00 1970 From: Lukas Wunner Subject: Re: [PATCH 3/5] serial: core: Support common rs485 binding for RTS polarity Date: Wed, 8 Nov 2017 18:33:27 +0100 Message-ID: <20171108173327.GA10670@wunner.de> References: <20171108111355.pzcrvdgqqeleinss@pengutronix.de> Mime-Version: 1.0 Content-Type: text/plain; charset=iso-8859-1 Content-Transfer-Encoding: 8bit Return-path: Content-Disposition: inline In-Reply-To: <20171108111355.pzcrvdgqqeleinss-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org> Sender: devicetree-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: Uwe =?iso-8859-1?Q?Kleine-K=F6nig?= Cc: Greg Kroah-Hartman , Jiri Slaby , Sascha Hauer , Mark Jackson , Michal Oleszczyk , linux-serial-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, Rob Herring , Mark Rutland , devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org List-Id: devicetree@vger.kernel.org On Wed, Nov 08, 2017 at 12:13:55PM +0100, Uwe Kleine-König wrote: > On Wed, Nov 08, 2017 at 11:32:34AM +0100, Lukas Wunner wrote: > > When a driver invokes the uart_get_rs485_mode() helper, set the RTS > > polarity to active high by default unless the newly introduced > > "rs485-rts-active-low" property was specified. Thanks a lot Uwe for your review comments, those are good points, d'accord on all of them. I've already incorporated all suggested changes into my local repo but will wait a few days before respinning to see if there are further comments. Best, Lukas -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html