From mboxrd@z Thu Jan  1 00:00:00 1970
From: Corentin Labbe <clabbe.montjoie@gmail.com>
Subject: Re: [PATCH 1/2] ARM: sun8i: a83t: add dwmac-sun8i ethernet driver
Date: Wed, 8 Nov 2017 20:30:51 +0100
Message-ID: <20171108193051.GB26904@Red>
References: <20171107201326.17401-1-clabbe.montjoie@gmail.com>
 <CAGb2v64zkEoy=_9D7g+GC5ZxYg_zuaTo3LL1e=4RXLnL0VDWaA@mail.gmail.com>
 <20171108074858.ompog5in7xi776d6@flea.lan>
Mime-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Return-path: <linux-kernel-owner@vger.kernel.org>
Content-Disposition: inline
In-Reply-To: <20171108074858.ompog5in7xi776d6@flea.lan>
Sender: linux-kernel-owner@vger.kernel.org
To: Maxime Ripard <maxime.ripard@free-electrons.com>
Cc: Chen-Yu Tsai <wens@csie.org>, Rob Herring <robh+dt@kernel.org>, Mark Rutland <mark.rutland@arm.com>, Russell King <linux@armlinux.org.uk>, devicetree <devicetree@vger.kernel.org>, linux-arm-kernel <linux-arm-kernel@lists.infradead.org>, linux-kernel <linux-kernel@vger.kernel.org>
List-Id: devicetree@vger.kernel.org

On Wed, Nov 08, 2017 at 08:48:58AM +0100, Maxime Ripard wrote:
> On Wed, Nov 08, 2017 at 02:27:21PM +0800, Chen-Yu Tsai wrote:
> > On Wed, Nov 8, 2017 at 4:13 AM, Corentin Labbe
> > <clabbe.montjoie@gmail.com> wrote:
> > > The dwmac-sun8i is an ethernet MAC hardware that support 10/100/1000 speed.
> > > This patch enable the dwmac-sun8i on the Allwinner a83t SoC Device-tree.
> > 
> > The subject should say "add .... device node", not driver.
> > 
> > >
> > > Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
> > > Reviewed-by: Chen-Yu Tsai <wens@csie.org>
> > > ---
> > >  arch/arm/boot/dts/sun8i-a83t.dtsi | 29 +++++++++++++++++++++++++++++
> > >  1 file changed, 29 insertions(+)
> > >
> > > diff --git a/arch/arm/boot/dts/sun8i-a83t.dtsi b/arch/arm/boot/dts/sun8i-a83t.dtsi
> > > index 19acae1b4089..68e5135410ec 100644
> > > --- a/arch/arm/boot/dts/sun8i-a83t.dtsi
> > > +++ b/arch/arm/boot/dts/sun8i-a83t.dtsi
> > > @@ -336,6 +336,14 @@
> > >                         #interrupt-cells = <3>;
> > >                         #gpio-cells = <3>;
> > >
> > > +                       emac_rgmii_pins: emac-rgmii-pins {
> > > +                               pins = "PD2", "PD3", "PD4", "PD5", "PD6", "PD7",
> > > +                                      "PD11", "PD12", "PD13", "PD14", "PD18",
> > > +                                      "PD19", "PD21", "PD22", "PD23";
> > > +                               function = "gmac";
> > > +                               drive-strength = <40>;
> > > +                       };
> > > +
> > 
> > You should mention this change in your commit log.
> 
> And add a comment about why that drive strength is needed.
> 

OK I will do it

Thanks
Regards