From: Johan Hovold <johan@kernel.org>
To: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "Rob Herring" <robh+dt@kernel.org>,
"Mark Rutland" <mark.rutland@arm.com>,
"Arnd Bergmann" <arnd@arndb.de>,
"Alan Stern" <stern@rowland.harvard.edu>,
"Peter Chen" <peter.chen@nxp.com>,
linux-usb@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, "Johan Hovold" <johan@kernel.org>,
"Rafał Miłecki" <rafal@milecki.pl>,
"Florian Fainelli" <f.fainelli@gmail.com>
Subject: [PATCH 0/8] USB: add device-tree support for interfaces
Date: Thu, 9 Nov 2017 18:07:15 +0100 [thread overview]
Message-ID: <20171109170723.10960-1-johan@kernel.org> (raw)
This series adds support for representing USB interfaces in device tree
by implementing support for "interface nodes" and "combined nodes" from
the OF specification.
This is needed to be able to describe non-discoverable properties of
permanently attached USB devices and their interfaces such as any
i2c-clients connected to a USB-i2c bridge (e.g. the dln2 mfd) or,
eventually, devices connected to usb-serial converters (to be used with
serdev).
As part of this series the current binding for USB devices is cleaned
up and some already-used properties of "host-controller nodes" and "hub
nodes" are explicitly defined.
While doing this work I realised that a broken binding for USB-port LED
triggers had recently been merged. This trigger implementation assumes
an undocumented and conflicting binding for USB (root) hub ports, which
in fact lack a representation in device tree (the child nodes of hub
nodes represent the attached USB devices):
80dc6e1cd85f ("dt-bindings: leds: document new trigger-sources property")
In this series I only address an of_node leak in the trigger
implementation and add a FIXME about the port/device mixup. Note that
some broadcom dts have already started using such a "port" binding:
a503cf0cbe66 ("ARM: dts: BCM53573: Specify USB ports of on-SoC controllers")
69d22c70ac9a ("ARM: dts: BCM5301X: Specify USB ports for each controller")
To fix this, any triggers need to be described using properties of the
host-controller (or hub) rather than of their children.
Johan
Johan Hovold (8):
dt-bindings: usb: fix example hub node name
dt-bindings: usb: fix reg-property port-number range
dt-bindings: usb: clean up compatible property
dt-bindings: usb: document hub and host-controller properties
dt-bindings: usb: add interface binding
USB: add device-tree support for interfaces
USB: ledtrig-usbport: fix of-node leak
USB: of: clean up device-node helper
.../devicetree/bindings/usb/usb-device.txt | 99 +++++++++++++++++++---
drivers/usb/core/ledtrig-usbport.c | 10 ++-
drivers/usb/core/message.c | 18 ++--
drivers/usb/core/of.c | 95 ++++++++++++++++++---
drivers/usb/core/usb.c | 3 +-
include/linux/usb/of.h | 21 ++++-
6 files changed, 208 insertions(+), 38 deletions(-)
--
2.15.0
next reply other threads:[~2017-11-09 17:07 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-11-09 17:07 Johan Hovold [this message]
2017-11-09 17:07 ` [PATCH 1/8] dt-bindings: usb: fix example hub node name Johan Hovold
2017-11-15 15:44 ` Rob Herring
2017-11-09 17:07 ` [PATCH 2/8] dt-bindings: usb: fix reg-property port-number range Johan Hovold
2017-11-09 17:07 ` [PATCH 4/8] dt-bindings: usb: document hub and host-controller properties Johan Hovold
[not found] ` <20171109170723.10960-5-johan-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
2017-11-15 15:46 ` Rob Herring
2017-11-16 8:45 ` Johan Hovold
2017-11-16 14:32 ` Rob Herring
2017-11-09 17:07 ` [PATCH 5/8] dt-bindings: usb: add interface binding Johan Hovold
2017-11-09 17:07 ` [PATCH 6/8] USB: add device-tree support for interfaces Johan Hovold
2017-11-09 17:07 ` [PATCH 7/8] USB: ledtrig-usbport: fix of-node leak Johan Hovold
2017-11-09 17:07 ` [PATCH 8/8] USB: of: clean up device-node helper Johan Hovold
[not found] ` <20171109170723.10960-1-johan-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
2017-11-09 17:07 ` [PATCH 3/8] dt-bindings: usb: clean up compatible property Johan Hovold
2017-11-16 14:43 ` [PATCH 0/8] USB: add device-tree support for interfaces Rob Herring
2017-11-16 16:12 ` Johan Hovold
2017-11-16 18:33 ` Rob Herring
[not found] ` <CAL_JsqKFpa6_0nB5ftgFRvwqMN8aBGymASZY7ZeykN0MD6UWbw-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2017-11-17 16:30 ` Johan Hovold
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20171109170723.10960-1-johan@kernel.org \
--to=johan@kernel.org \
--cc=arnd@arndb.de \
--cc=devicetree@vger.kernel.org \
--cc=f.fainelli@gmail.com \
--cc=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=peter.chen@nxp.com \
--cc=rafal@milecki.pl \
--cc=robh+dt@kernel.org \
--cc=stern@rowland.harvard.edu \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).