From: Jonathan Cameron <Jonathan.Cameron-hv44wF8Li93QT0dZR+AlfA@public.gmane.org>
To: Christoph Fritz <chf.fritz-gM/Ye1E23mwN+BqQ9rBEUg@public.gmane.org>
Cc: Jonathan Cameron <jic23-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
Peter Meerwald-Stadler
<pmeerw-jW+XmwGofnusTnJN9+BGXg@public.gmane.org>,
Rob Herring <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
linux-iio-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Subject: Re: [PATCH 1/3] iio: light: add support for Intersil isl76683 sensor
Date: Sat, 11 Nov 2017 00:50:15 +0000 [thread overview]
Message-ID: <20171111005015.00003369@huawei.com> (raw)
In-Reply-To: <1510068983-25769-2-git-send-email-chf.fritz-gM/Ye1E23mwN+BqQ9rBEUg@public.gmane.org>
On Tue, 7 Nov 2017 16:36:21 +0100
Christoph Fritz <chf.fritz-gM/Ye1E23mwN+BqQ9rBEUg@public.gmane.org> wrote:
> This patch adds support for Intersil isl76683 light sensor.
>
> Signed-off-by: Christoph Fritz <chf.fritz-gM/Ye1E23mwN+BqQ9rBEUg@public.gmane.org>
Sorry, bit of a rushed review as boarding about to start for a transatlantic flight...
Anyhow, a few comments inline in addition to Peter's. I'll take a proper look at V2.
Jonathan
> ---
> drivers/iio/light/Kconfig | 12 +
> drivers/iio/light/Makefile | 1 +
> drivers/iio/light/isl76683.c | 693 +++++++++++++++++++++++++++++++++++++++++++
> 3 files changed, 706 insertions(+)
> create mode 100644 drivers/iio/light/isl76683.c
>
> diff --git a/drivers/iio/light/Kconfig b/drivers/iio/light/Kconfig
> index 2356ed9..4f0882c 100644
> --- a/drivers/iio/light/Kconfig
> +++ b/drivers/iio/light/Kconfig
> @@ -194,6 +194,18 @@ config ISL29125
> To compile this driver as a module, choose M here: the module will be
> called isl29125.
>
> +config ISL76683
> + tristate "Intersil ISL76683 light sensor"
> + depends on I2C
> + select IIO_BUFFER
> + select IIO_TRIGGERED_BUFFER
> + help
> + Say Y here if you want to build a driver for the Intersil ISL76683
> + light sensor for I2C.
> +
> + To compile this driver as a module, choose M here: the module will be
> + called isl76683.
> +
> config HID_SENSOR_ALS
> depends on HID_SENSOR_HUB
> select IIO_BUFFER
> diff --git a/drivers/iio/light/Makefile b/drivers/iio/light/Makefile
> index fa32fa4..886a51f 100644
> --- a/drivers/iio/light/Makefile
> +++ b/drivers/iio/light/Makefile
> @@ -22,6 +22,7 @@ obj-$(CONFIG_HID_SENSOR_PROX) += hid-sensor-prox.o
> obj-$(CONFIG_SENSORS_ISL29018) += isl29018.o
> obj-$(CONFIG_SENSORS_ISL29028) += isl29028.o
> obj-$(CONFIG_ISL29125) += isl29125.o
> +obj-$(CONFIG_ISL76683) += isl76683.o
> obj-$(CONFIG_JSA1212) += jsa1212.o
> obj-$(CONFIG_SENSORS_LM3533) += lm3533-als.o
> obj-$(CONFIG_LTR501) += ltr501.o
> diff --git a/drivers/iio/light/isl76683.c b/drivers/iio/light/isl76683.c
> new file mode 100644
> index 0000000..b730276
> --- /dev/null
> +++ b/drivers/iio/light/isl76683.c
> @@ -0,0 +1,693 @@
> +/*
> + * IIO driver for the light sensor ISL76683.
> + *
> + * Copyright (c) 2017 Christoph Fritz <chf.fritz-gM/Ye1E23mwN+BqQ9rBEUg@public.gmane.org>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful, but WITHOUT
> + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
> + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
> + * more details.
> + *
> + * Datasheet:
> + * http://www.intersil.com/content/dam/Intersil/documents/isl7/isl76683.pdf
> + */
> +
> +#include <linux/module.h>
> +#include <linux/i2c.h>
> +#include <linux/pm_runtime.h>
> +#include <linux/regmap.h>
> +#include <linux/util_macros.h>
> +#include <linux/iio/iio.h>
> +#include <linux/iio/sysfs.h>
> +#include <linux/iio/buffer.h>
> +#include <linux/iio/trigger.h>
> +#include <linux/iio/trigger_consumer.h>
> +#include <linux/iio/triggered_buffer.h>
> +
> +#define ISL76683_REG_CMD 0x00
> +#define ISL76683_REG_CTRL 0x01
> +#define ISL76683_REG_THR_HI 0x02
> +#define ISL76683_REG_THR_LO 0x03
> +#define ISL76683_REG_SENSOR_L 0x04
> +#define ISL76683_REG_SENSOR_M 0x05
> +#define ISL76683_REG_CLEAR_INT 0x40
> +#define ISL76683_REGMAP_MAX 0x40
> +
> +#define ISL76683_CMD_ENABLE BIT(7)
> +#define ISL76683_CMD_PWRDWN BIT(6)
> +#define ISL76683_WIDTH_MASK 0x3
> +#define ISL76683_PHOTOD_SHFT 2
> +#define ISL76683_PHOTOD_MASK (0x3 << ISL76683_PHOTOD_SHFT)
> +#define ISL76683_INTPERS_MASK 0x3
> +#define ISL76683_LUXRANGE_SHFT 2
> +#define ISL76683_LUXRANGE_MASK (0x3 << ISL76683_LUXRANGE_SHFT)
> +#define ISL76683_LUXRANGE_STR "1000 4000 16000 64000"
> +
> +enum isl76683_dmode {
> + ISL76683_DIODE_0 = 0,
> + ISL76683_DIODE_IR,
> + ISL76683_DIODE_DIFF,
> +};
> +
> +enum isl76683_lux_range {
> + ISL76683_LUX_1000 = 0,
> + ISL76683_LUX_4000,
> + ISL76683_LUX_16000,
> + ISL76683_LUX_64000,
> +};
> +
> +static const int isl76683_lux_ranges_available[] = {
> + 1000, 4000, 16000, 64000};
> +
> +#define ISL76683_LUX_RANGE_DEFAULT ISL76683_LUX_1000
> +#define ISL76683_DIODE_MAX ISL76683_DIODE_DIFF
> +#define ISL76683_DIODE_DEFAULT ISL76683_DIODE_0
> +#define ISL76683_WIDTH_DEFAULT 0x0
> +#define ISL76683_RESOLUTION_DEFAULT 16
> +#define ISL76683_EXT_RESISTOR_DEFAULT 100
> +#define ISL76683_KOHM_MIN 1
> +#define ISL76683_KOHM_MAX 1000
> +#define ISL76683_INTPERS_DEFAULT 0x0
> +#define ISL76683_THR_DEFAULT 0x7f
> +
> +struct isl76683_chip {
> + enum isl76683_lux_range luxrange;
> + int external_resistor;
> + enum isl76683_dmode photodiode;
> + struct i2c_client *client;
> + struct regmap *rmp;
> + struct completion irq_complete;
> + struct iio_trigger *trig;
> + bool trig_enabled;
> + struct mutex lock;
> + __le16 *buffer;
> + s64 time_ns;
> + bool buffer_running;
> +};
> +
> +static bool isl76683_readable_reg(struct device *dev, unsigned int reg)
> +{
> + switch (reg) {
> + case ISL76683_REG_CMD:
> + case ISL76683_REG_CTRL:
> + case ISL76683_REG_THR_HI:
> + case ISL76683_REG_THR_LO:
> + case ISL76683_REG_SENSOR_L:
> + case ISL76683_REG_SENSOR_M:
> + case ISL76683_REG_CLEAR_INT:
> + return true;
> + default:
> + return false;
> + }
> +}
> +
> +static bool isl76683_writeable_reg(struct device *dev, unsigned int reg)
> +{
> + switch (reg) {
> + case ISL76683_REG_CMD:
> + case ISL76683_REG_CTRL:
> + case ISL76683_REG_THR_HI:
> + case ISL76683_REG_THR_LO:
> + return true;
> + default:
> + return false;
> + }
> +}
> +
> +static bool isl76683_is_volatile_reg(struct device *dev, unsigned int reg)
> +{
> + switch (reg) {
> + case ISL76683_REG_SENSOR_L:
> + case ISL76683_REG_SENSOR_M:
> + case ISL76683_REG_CLEAR_INT:
> + return true;
> + default:
> + return false;
> + }
> +}
> +
> +static const struct regmap_config isl76683_regmap_config = {
> + .reg_bits = 8,
> + .val_bits = 8,
> + .max_register = ISL76683_REGMAP_MAX,
> + .readable_reg = isl76683_readable_reg,
> + .writeable_reg = isl76683_writeable_reg,
> + .volatile_reg = isl76683_is_volatile_reg,
> + .cache_type = REGCACHE_RBTREE,
> +};
> +
> +static int isl76683_set_config(struct isl76683_chip *chip)
> +{
> + int ret;
> +
> + ret = regmap_update_bits(chip->rmp, ISL76683_REG_CTRL,
> + ISL76683_LUXRANGE_MASK | ISL76683_INTPERS_MASK,
> + (chip->luxrange << ISL76683_LUXRANGE_SHFT) |
> + ISL76683_INTPERS_DEFAULT);
> + if (ret < 0)
> + return ret;
> +
> + ret = regmap_update_bits(chip->rmp, ISL76683_REG_CMD,
> + ISL76683_PHOTOD_MASK | ISL76683_WIDTH_MASK,
> + (chip->photodiode << ISL76683_PHOTOD_SHFT) |
> + ISL76683_WIDTH_DEFAULT);
> + if (ret < 0)
> + return ret;
> +
> + ret = regmap_write(chip->rmp, ISL76683_REG_THR_HI,
> + ISL76683_THR_DEFAULT);
> + if (ret < 0)
> + return ret;
> +
> + ret = regmap_write(chip->rmp, ISL76683_REG_THR_LO,
> + ISL76683_THR_DEFAULT);
> + if (ret < 0)
> + return ret;
> +
> + return 0;
> +}
> +
> +static int isl76683_power(struct isl76683_chip *chip, bool on)
> +{
> + int ret;
> +
> + ret = regmap_update_bits(chip->rmp, ISL76683_REG_CMD,
> + ISL76683_CMD_ENABLE | ISL76683_CMD_PWRDWN,
> + 0x0);
> + if (ret < 0)
> + return ret;
> +
> + ret = regmap_update_bits(chip->rmp, ISL76683_REG_CMD,
> + ISL76683_CMD_ENABLE | ISL76683_CMD_PWRDWN,
> + on ? ISL76683_CMD_ENABLE : ISL76683_CMD_PWRDWN);
> + if (ret < 0)
> + return ret;
> +
> + return on ? isl76683_set_config(chip) : 0;
> +}
> +
> +static int isl76683_reset(struct isl76683_chip *chip)
> +{
> + int ret;
> +
> + ret = isl76683_power(chip, false);
> + if (ret < 0)
> + return ret;
> +
> + return isl76683_power(chip, true);
> +}
> +
> +static int isl76683_read_lux(struct isl76683_chip *chip,
> + bool is_processed, int *val)
> +{
> + unsigned int sensor_data, range, fsr;
> + __le16 sensor_raw;
> + int ret;
> +
> + ret = regmap_bulk_read(chip->rmp, ISL76683_REG_SENSOR_L,
> + &sensor_raw, sizeof(sensor_raw));
> + if (ret)
> + return ret;
> +
> + sensor_data = le16_to_cpu(sensor_raw);
> +
> + if (!is_processed) {
> + *val = sensor_data;
> + return 0;
> + }
> +
> + /* range values taken from datasheet (table 9) */
> + if (chip->luxrange == ISL76683_LUX_1000)
> + range = 973;
> + else if (chip->luxrange == ISL76683_LUX_4000)
> + range = 3892;
> + else if (chip->luxrange == ISL76683_LUX_16000)
> + range = 15568;
> + else if (chip->luxrange == ISL76683_LUX_64000)
> + range = 62272;
> + else
> + return -EINVAL;
> +
> + /* equations from datasheet (EQ.3 and EQ.4) */
> + fsr = (100 * range) / chip->external_resistor;
> + *val = (fsr * sensor_data) / (1 << ISL76683_RESOLUTION_DEFAULT);
> +
> + return 0;
> +}
> +
> +static irqreturn_t isl76683_interrupt_handler(int irq, void *private)
> +{
> + struct iio_dev *indio_dev = private;
> + struct isl76683_chip *chip = iio_priv(indio_dev);
> +
> + chip->time_ns = iio_get_time_ns(indio_dev);
> +
> + if (chip->trig_enabled)
> + iio_trigger_poll(chip->trig);
> +
> + if (!completion_done(&chip->irq_complete))
> + complete(&chip->irq_complete);
> +
> + return IRQ_HANDLED;
> +}
> +
> +static inline int isl76683_start_measurement(struct isl76683_chip *chip)
> +{
> + int dummy;
> +
> + /* dummy read is clearing irq and triggers new measurement */
> + return regmap_read(chip->rmp, ISL76683_REG_CLEAR_INT, &dummy);
> +}
> +
> +static int isl76683_singleshot_conversion(struct isl76683_chip *chip,
> + const struct iio_chan_spec *chan,
> + bool is_processed, int *val)
> +{
> + long timeout;
> + int ret;
> +
> + if (chip->buffer_running)
Don't reinvent the wheel. (this is racy btw).
iio_claim_direct_mode etc will do this in a non racy fashion for you.
> + return -EAGAIN;
> +
> + switch (chan->channel2) {
> + case IIO_MOD_LIGHT_BOTH:
> + chip->photodiode = ISL76683_DIODE_DIFF;
> + break;
> + case IIO_MOD_LIGHT_IR:
> + chip->photodiode = ISL76683_DIODE_IR;
> + break;
> + default:
> + chip->photodiode = ISL76683_DIODE_0;
> + }
> +
> + ret = isl76683_set_config(chip);
> + if (ret)
> + return ret;
> +
> + ret = isl76683_start_measurement(chip);
> + if (ret < 0)
> + return ret;
> +
> + /* wait for measurement to complete */
> + timeout = wait_for_completion_interruptible_timeout(
> + &chip->irq_complete,
> + msecs_to_jiffies(5000));
> + if (timeout == 0) {
> + dev_err(&chip->client->dev, "measurement timed out\n");
> + return -ETIMEDOUT;
> + } else if (timeout < 0) {
> + dev_err(&chip->client->dev, "wait for measurement failed\n");
> + return -EINTR;
> + }
> +
> + ret = isl76683_read_lux(chip, is_processed, val);
> + if (ret) {
> + dev_err(&chip->client->dev, "%s: Error %d reading lux\n",
> + __func__, ret);
> + return ret;
> + }
> +
> + return IIO_VAL_INT;
> +}
> +
> +static irqreturn_t isl76683_trigger_handler(int irq, void *p)
> +{
> + struct iio_poll_func *pf = p;
> + struct iio_dev *indio_dev = pf->indio_dev;
> + struct isl76683_chip *chip = iio_priv(indio_dev);
> + __le16 buf;
> + int ret;
> +
> + ret = regmap_bulk_read(chip->rmp, ISL76683_REG_SENSOR_L, &buf, 2);
> + if (ret)
> + return ret;
> +
> + chip->buffer[0] = le16_to_cpu(buf);
> +
> + iio_push_to_buffers_with_timestamp(indio_dev, chip->buffer,
> + chip->time_ns);
> +
> + iio_trigger_notify_done(indio_dev->trig);
> +
> + ret = isl76683_start_measurement(chip);
> + if (ret < 0)
> + return ret;
> +
> + return IRQ_HANDLED;
> +}
> +
> +static int isl76683_buffer_preenable(struct iio_dev *indio_dev)
> +{
> + struct isl76683_chip *chip = iio_priv(indio_dev);
> +
> + mutex_lock(&chip->lock);
> + chip->buffer_running = true;
> + mutex_unlock(&chip->lock);
> + chip->photodiode = indio_dev->channels[0].channel2;
> + return isl76683_set_config(chip);
> +}
> +
> +static int isl76683_buffer_postdisable(struct iio_dev *indio_dev)
> +{
> + struct isl76683_chip *chip = iio_priv(indio_dev);
> +
> + chip->buffer_running = false;
> + return 0;
> +}
> +
> +static const struct iio_buffer_setup_ops isl76683_buffer_setup_ops = {
> + .preenable = &isl76683_buffer_preenable,
> + .postdisable = &isl76683_buffer_postdisable,
> + .predisable = iio_triggered_buffer_predisable,
> + .postenable = iio_triggered_buffer_postenable,
> + .validate_scan_mask = &iio_validate_scan_mask_onehot,
> +};
> +
> +static int isl76683_read_raw(struct iio_dev *indio_dev,
> + struct iio_chan_spec const *chan,
> + int *val, int *val2, long mask)
> +{
> + struct isl76683_chip *chip = iio_priv(indio_dev);
> + int ret;
> +
> + switch (mask) {
> + case IIO_CHAN_INFO_RAW:
> + mutex_lock(&chip->lock);
> + ret = isl76683_singleshot_conversion(chip, chan, false, val);
> + mutex_unlock(&chip->lock);
> + return ret;
> + case IIO_CHAN_INFO_PROCESSED:
> + mutex_lock(&chip->lock);
> + ret = isl76683_singleshot_conversion(chip, chan, true, val);
> + mutex_unlock(&chip->lock);
> + return ret;
> + case IIO_CHAN_INFO_HARDWAREGAIN:
> + *val = isl76683_lux_ranges_available[chip->luxrange];
> + return IIO_VAL_INT;
> + }
> +
> + return -EINVAL;
> +}
> +
> +static int isl76683_write_raw(struct iio_dev *indio_dev,
> + struct iio_chan_spec const *chan,
> + int val, int val2, long mask)
> +{
> + struct isl76683_chip *chip = iio_priv(indio_dev);
> + int ret;
> +
> + switch (mask) {
> + case IIO_CHAN_INFO_HARDWAREGAIN:
> + mutex_lock(&chip->lock);
> + chip->luxrange = find_closest(val,
> + isl76683_lux_ranges_available,
> + ARRAY_SIZE(isl76683_lux_ranges_available));
> + ret = isl76683_set_config(chip);
> + mutex_unlock(&chip->lock);
> + return ret;
> + }
> +
> + return -EINVAL;
> +}
> +
> +static IIO_CONST_ATTR(in_illuminance_hardwaregain_available,
> + ISL76683_LUXRANGE_STR);
> +
> +static struct attribute *isl76683_attributes[] = {
> + &iio_const_attr_in_illuminance_hardwaregain_available.dev_attr.attr,
> + NULL
> +};
> +
> +static const struct attribute_group isl76683_attribute_group = {
> + .attrs = isl76683_attributes,
> +};
> +
> +#define ISL76683_CHANNEL_2(_ch2, _si) { \
> + .type = IIO_LIGHT, \
> + .modified = 1, \
> + .channel2 = _ch2, \
> + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \
> + BIT(IIO_CHAN_INFO_PROCESSED), \
> + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_HARDWAREGAIN), \
> + .scan_index = _si, \
> + .scan_type = { \
> + .sign = 'u', \
> + .realbits = 16, \
> + .storagebits = 16, \
> + .endianness = IIO_CPU, \
> + }, \
> +}
> +
> +static const struct iio_chan_spec isl76683_channels[] = {
> + {
> + .type = IIO_LIGHT,
> + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
> + BIT(IIO_CHAN_INFO_PROCESSED),
> + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_HARDWAREGAIN),
> + .scan_index = 0,
> + .scan_type = {
> + .sign = 'u',
> + .realbits = 16,
> + .storagebits = 16,
> + .endianness = IIO_CPU,
> + },
> + },
> + ISL76683_CHANNEL_2(IIO_MOD_LIGHT_IR, 1),
> + ISL76683_CHANNEL_2(IIO_MOD_LIGHT_BOTH, 2),
> + IIO_CHAN_SOFT_TIMESTAMP(3),
> +};
> +
> +static int isl76683_update_scan_mode(struct iio_dev *indio_dev,
> + const unsigned long *scan_mask)
> +{
> + struct isl76683_chip *chip = iio_priv(indio_dev);
> +
> + kfree(chip->buffer);
> + chip->buffer = kzalloc(indio_dev->scan_bytes, GFP_KERNEL);
> + if (chip->buffer == NULL)
> + return -ENOMEM;
I would be lazy and just make the buffer big enough for all cases.
You will want to play the __cachline_aligned game to make it
dma safe at the end of the chip structure.
> +
> + return 0;
> +}
> +
> +static const struct iio_info isl76683_info = {
> + .update_scan_mode = isl76683_update_scan_mode,
> + .read_raw = isl76683_read_raw,
> + .write_raw = isl76683_write_raw,
> + .attrs = &isl76683_attribute_group,
> + .driver_module = THIS_MODULE,
This will not work with latest IIO tree (or linux-next)
Just drop setting this field as it no longer exists.
> +};
> +
> +static int isl76683_set_trigger_state(struct iio_trigger *trig, bool enable)
> +{
> + struct isl76683_chip *chip = iio_trigger_get_drvdata(trig);
> + int ret;
> +
> + if (enable) {
> + chip->trig_enabled = true;
This is unusual enough that I'd like a comment here on how you would end
up in a state where this is necessary.
> + ret = isl76683_start_measurement(chip);
> + if (ret < 0)
> + return ret;
> + } else
> + chip->trig_enabled = false;
> +
> + return 0;
> +}
> +
> +static const struct iio_trigger_ops isl76683_trigger_ops = {
> + .owner = THIS_MODULE,
> + .set_trigger_state = isl76683_set_trigger_state,
> + .validate_device = iio_trigger_validate_own_device,
> +};
> +
> +static int isl76683_probe(struct i2c_client *client,
> + const struct i2c_device_id *id)
> +{
> + struct isl76683_chip *chip;
> + struct iio_dev *indio_dev;
> + struct device_node *np = client->dev.of_node;
> + int rs = ISL76683_EXT_RESISTOR_DEFAULT;
> + int v, ret;
> +
> + indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*chip));
> + if (!indio_dev)
> + return -ENOMEM;
> +
> + chip = iio_priv(indio_dev);
> +
> + i2c_set_clientdata(client, indio_dev);
> + chip->client = client;
> +
> + if (np) {
> + ret = of_property_read_u32(np, "isil,external-resistor", &v);
> + if (ret || v < ISL76683_KOHM_MIN || v > ISL76683_KOHM_MAX)
> + dev_warn(&client->dev,
> + "assuming %i kOhm resistor\n", rs);
> + else
> + rs = v;
> + }
> +
> + chip->luxrange = ISL76683_LUX_RANGE_DEFAULT;
> + chip->external_resistor = rs;
> + chip->photodiode = ISL76683_DIODE_DEFAULT;
> + chip->buffer_running = false;
> +
> + chip->rmp = devm_regmap_init_i2c(client, &isl76683_regmap_config);
> + if (IS_ERR(chip->rmp)) {
> + ret = PTR_ERR(chip->rmp);
> + dev_err(&client->dev, "%s: Error %d initializing regmap\n",
> + __func__, ret);
> + return ret;
> + }
> +
> + mutex_init(&chip->lock);
> +
> + init_completion(&chip->irq_complete);
> +
> + if (!client->irq) {
> + dev_err(&client->dev, "no interrupt configured\n");
> + return -EINVAL;
> + }
> +
> + indio_dev->dev.parent = &client->dev;
> + indio_dev->info = &isl76683_info;
> + indio_dev->channels = isl76683_channels;
> + indio_dev->num_channels = ARRAY_SIZE(isl76683_channels);
> + indio_dev->name = id->name;
> + indio_dev->modes = INDIO_DIRECT_MODE;
> +
> + chip->trig_enabled = false;
> + chip->trig = devm_iio_trigger_alloc(&client->dev, "%s-dev%d",
> + indio_dev->name, indio_dev->id);
> + if (!chip->trig)
> + return -ENOMEM;
> +
> + chip->trig->ops = &isl76683_trigger_ops;
> + chip->trig->dev.parent = &client->dev;
> + iio_trigger_set_drvdata(chip->trig, chip);
> +
> + ret = devm_request_irq(&client->dev, client->irq,
> + isl76683_interrupt_handler,
> + IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
> + "isl76683_event", indio_dev);
> + if (ret) {
> + dev_err(&client->dev, "irq request error\n");
> + return ret;
> + }
> +
> + ret = devm_iio_trigger_register(&client->dev, chip->trig);
> + if (ret) {
> + dev_err(&client->dev, "iio_trigger register error\n");
> + return ret;
> + }
> +
> + ret = isl76683_reset(chip);
> + if (ret) {
> + dev_err(&client->dev, "reset failed\n");
> + return ret;
> + }
> +
> + ret = isl76683_read_lux(chip, false, &v);
> + if (ret) {
> + dev_err(&client->dev, "initial dummy readout failed\n");
> + return ret;
> + }
> +
> + ret = devm_iio_triggered_buffer_setup(&client->dev, indio_dev, NULL,
> + &isl76683_trigger_handler, &isl76683_buffer_setup_ops);
> + if (ret)
> + return ret;
> +
> + ret = devm_iio_device_register(&client->dev, indio_dev);
> + if (ret) {
> + dev_err(&client->dev,
> + "%s(): iio registration failed with error %d\n",
> + __func__, ret);
> + return ret;
Drop this return ret.
> + }
> +
> + return ret;
> +}
> +
> +static int isl76683_remove(struct i2c_client *client)
> +{
> + struct iio_dev *indio_dev = i2c_get_clientdata(client);
> + struct isl76683_chip *chip = iio_priv(indio_dev);
> +
> + pm_runtime_disable(&client->dev);
> + pm_runtime_set_suspended(&client->dev);
> + isl76683_power(chip, false);
> + kfree(chip->buffer);
> +
> + return 0;
> +}
> +
> +#if defined(CONFIG_PM_SLEEP) || defined(CONFIG_PM)
> +static int isl76683_runtime_suspend(struct device *dev)
> +{
> + struct isl76683_chip *chip =
> + iio_priv(i2c_get_clientdata(to_i2c_client(dev)));
> + int ret;
> +
> + mutex_lock(&chip->lock);
> + ret = isl76683_power(chip, false);
> + regcache_mark_dirty(chip->rmp);
> + mutex_unlock(&chip->lock);
> +
> + return ret;
> +}
> +
> +static int isl76683_runtime_resume(struct device *dev)
> +{
> + struct isl76683_chip *chip =
> + iio_priv(i2c_get_clientdata(to_i2c_client(dev)));
> + int ret;
> +
> + mutex_lock(&chip->lock);
> + ret = isl76683_power(chip, true);
> + mutex_unlock(&chip->lock);
> +
> + return ret;
> +}
> +#endif
> +
> +static const struct dev_pm_ops isl76683_pm_ops = {
> + SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend,
> + pm_runtime_force_resume)
> + SET_RUNTIME_PM_OPS(isl76683_runtime_suspend,
> + isl76683_runtime_resume, NULL)
> +};
> +
> +static const struct i2c_device_id isl76683_id[] = {
> + {"isl76683", 0},
> + {}
> +};
> +MODULE_DEVICE_TABLE(i2c, isl76683_id);
> +
> +static const struct of_device_id isl76683_of_match[] = {
> + { .compatible = "isil,isl76683", },
> + { },
> +};
> +MODULE_DEVICE_TABLE(of, isl76683_of_match);
> +
> +static struct i2c_driver isl76683_driver = {
> + .driver = {
> + .name = "isl76683",
> + .of_match_table = isl76683_of_match,
> + .pm = &isl76683_pm_ops,
> + },
> + .probe = isl76683_probe,
> + .remove = isl76683_remove,
> + .id_table = isl76683_id,
> +};
> +
> +module_i2c_driver(isl76683_driver);
> +
> +MODULE_DESCRIPTION("ISL76683 Ambient Light Sensor driver");
> +MODULE_LICENSE("GPL");
> +MODULE_AUTHOR("Christoph Fritz <chf.fritz-gM/Ye1E23mwN+BqQ9rBEUg@public.gmane.org>");
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2017-11-11 0:50 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-11-07 15:36 [PATCH 0/3] iio: add Intersil isl76683 light sensor support Christoph Fritz
[not found] ` <1510068983-25769-1-git-send-email-chf.fritz-gM/Ye1E23mwN+BqQ9rBEUg@public.gmane.org>
2017-11-07 15:36 ` [PATCH 1/3] iio: light: add support for Intersil isl76683 sensor Christoph Fritz
[not found] ` <1510068983-25769-2-git-send-email-chf.fritz-gM/Ye1E23mwN+BqQ9rBEUg@public.gmane.org>
2017-11-11 0:50 ` Jonathan Cameron [this message]
2017-11-07 15:36 ` [PATCH 2/3] dt-bindings: iio: add Intersil isl76683 light sensor bindings Christoph Fritz
[not found] ` <1510068983-25769-3-git-send-email-chf.fritz-gM/Ye1E23mwN+BqQ9rBEUg@public.gmane.org>
2017-11-10 21:26 ` Rob Herring
2017-11-14 14:20 ` Christoph Fritz
2017-11-07 15:36 ` [PATCH 3/3] iio: light: isl76683 add way to adjust irq threshold Christoph Fritz
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20171111005015.00003369@huawei.com \
--to=jonathan.cameron-hv44wf8li93qt0dzr+alfa@public.gmane.org \
--cc=chf.fritz-gM/Ye1E23mwN+BqQ9rBEUg@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=jic23-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=linux-iio-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=pmeerw-jW+XmwGofnusTnJN9+BGXg@public.gmane.org \
--cc=robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).