From: Sergei Shtylyov <sergei.shtylyov-M4DtvfQ/ZS1MRgGoP+s0PdBPR1lH4CV8@public.gmane.org>
To: Simon Horman <horms-/R6kz+dDXgpPR4JQBCEnsQ@public.gmane.org>,
Rob Herring <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
Catalin Marinas <catalin.marinas-5wv7dgnIgG8@public.gmane.org>,
Will Deacon <will.deacon-5wv7dgnIgG8@public.gmane.org>,
linux-renesas-soc-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Cc: Magnus Damm <magnus.damm-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
Mark Rutland <mark.rutland-5wv7dgnIgG8@public.gmane.org>,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
Vladimir Barinov
<vladimir.barinov-M4DtvfQ/ZS1MRgGoP+s0PdBPR1lH4CV8@public.gmane.org>,
Sergei Shtylyov
<sergei.shtylyov-M4DtvfQ/ZS1MRgGoP+s0PdBPR1lH4CV8@public.gmane.org>
Subject: [PATCH 1/2] arm64: dts: renesas: r8a77970: add I2C support
Date: Fri, 17 Nov 2017 00:06:30 +0300 [thread overview]
Message-ID: <20171116210757.729290426@cogentembedded.com> (raw)
[-- Attachment #1: arm64-dts-renesas-r8a77970-add-I2C-support.patch --]
[-- Type: text/plain, Size: 3615 bytes --]
Define the generic R8A77970 parts of the I2C[0-4] device node.
Based on the original (and large) patch by Daisuke Matsushita
<daisuke.matsushita.ns-FCd8Q96Dh0JBDgjK7y7TUQ@public.gmane.org>.
Signed-off-by: Vladimir Barinov <vladimir.barinov-M4DtvfQ/ZS1MRgGoP+s0PdBPR1lH4CV8@public.gmane.org>
Signed-off-by: Sergei Shtylyov <sergei.shtylyov-M4DtvfQ/ZS1MRgGoP+s0PdBPR1lH4CV8@public.gmane.org>
---
arch/arm64/boot/dts/renesas/r8a77970.dtsi | 88 ++++++++++++++++++++++++++++++
1 file changed, 88 insertions(+)
Index: renesas/arch/arm64/boot/dts/renesas/r8a77970.dtsi
===================================================================
--- renesas.orig/arch/arm64/boot/dts/renesas/r8a77970.dtsi
+++ renesas/arch/arm64/boot/dts/renesas/r8a77970.dtsi
@@ -18,6 +18,14 @@
#address-cells = <2>;
#size-cells = <2>;
+ aliases {
+ i2c0 = &i2c0;
+ i2c1 = &i2c1;
+ i2c2 = &i2c2;
+ i2c3 = &i2c3;
+ i2c4 = &i2c4;
+ };
+
psci {
compatible = "arm,psci-1.0", "arm,psci-0.2";
method = "smc";
@@ -483,5 +491,85 @@
#address-cells = <1>;
#size-cells = <0>;
};
+
+ i2c0: i2c@e6500000 {
+ compatible = "renesas,i2c-r8a77970",
+ "renesas,rcar-gen3-i2c";
+ reg = <0 0xe6500000 0 0x40>;
+ interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 931>;
+ power-domains = <&sysc 32>;
+ resets = <&cpg 931>;
+ dmas = <&dmac1 0x91>, <&dmac1 0x90>;
+ dma-names = "tx", "rx";
+ i2c-scl-internal-delay-ns = <6>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c1: i2c@e6508000 {
+ compatible = "renesas,i2c-r8a77970",
+ "renesas,rcar-gen3-i2c";
+ reg = <0 0xe6508000 0 0x40>;
+ interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 930>;
+ power-domains = <&sysc 32>;
+ resets = <&cpg 930>;
+ dmas = <&dmac1 0x93>, <&dmac1 0x92>;
+ dma-names = "tx", "rx";
+ i2c-scl-internal-delay-ns = <6>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c2: i2c@e6510000 {
+ compatible = "renesas,i2c-r8a77970",
+ "renesas,rcar-gen3-i2c";
+ reg = <0 0xe6510000 0 0x40>;
+ interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 929>;
+ power-domains = <&sysc 32>;
+ resets = <&cpg 929>;
+ dmas = <&dmac1 0x95>, <&dmac1 0x94>;
+ dma-names = "tx", "rx";
+ i2c-scl-internal-delay-ns = <6>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c3: i2c@e66d0000 {
+ compatible = "renesas,i2c-r8a77970",
+ "renesas,rcar-gen3-i2c";
+ reg = <0 0xe66d0000 0 0x40>;
+ interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 928>;
+ power-domains = <&sysc 32>;
+ resets = <&cpg 928>;
+ dmas = <&dmac1 0x97>, <&dmac1 0x96>;
+ dma-names = "tx", "rx";
+ i2c-scl-internal-delay-ns = <6>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c4: i2c@e66d8000 {
+ compatible = "renesas,i2c-r8a77970",
+ "renesas,rcar-gen3-i2c";
+ reg = <0 0xe66d8000 0 0x40>;
+ interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 927>;
+ power-domains = <&sysc 32>;
+ resets = <&cpg 927>;
+ dmas = <&dmac1 0x99>, <&dmac1 0x98>;
+ dma-names = "tx", "rx";
+ i2c-scl-internal-delay-ns = <6>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
};
};
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next reply other threads:[~2017-11-16 21:06 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-11-16 21:06 Sergei Shtylyov [this message]
2017-11-22 13:06 ` [PATCH 1/2] arm64: dts: renesas: r8a77970: add I2C support Geert Uytterhoeven
[not found] ` <CAMuHMdV1RFyvPSZjEiJvdnu6QfHC9s-oUubvph0atGqx27MjnA-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2017-11-29 9:38 ` Simon Horman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20171116210757.729290426@cogentembedded.com \
--to=sergei.shtylyov-m4dtvfq/zs1mrggop+s0pdbpr1lh4cv8@public.gmane.org \
--cc=catalin.marinas-5wv7dgnIgG8@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=horms-/R6kz+dDXgpPR4JQBCEnsQ@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=linux-renesas-soc-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=magnus.damm-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
--cc=mark.rutland-5wv7dgnIgG8@public.gmane.org \
--cc=robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=vladimir.barinov-M4DtvfQ/ZS1MRgGoP+s0PdBPR1lH4CV8@public.gmane.org \
--cc=will.deacon-5wv7dgnIgG8@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).