From mboxrd@z Thu Jan 1 00:00:00 1970 From: Sergei Shtylyov Subject: [PATCH 2/2] arm64: dts: renesas: eagle: add I2C0 support Date: Fri, 17 Nov 2017 00:06:31 +0300 Message-ID: <20171116210801.215014557@cogentembedded.com> Mime-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-15 Return-path: Content-Disposition: inline; filename=arm64-dts-renesas-eagle-add-I2C0-support.patch Sender: linux-renesas-soc-owner@vger.kernel.org To: Simon Horman , Rob Herring , Catalin Marinas , Will Deacon , linux-renesas-soc@vger.kernel.org, devicetree@vger.kernel.org Cc: Magnus Damm , Mark Rutland , linux-arm-kernel@lists.infradead.org, Vladimir Barinov , Sergei Shtylyov List-Id: devicetree@vger.kernel.org Define the Eagle board dependent part of the I2C0 device node. The I2C0 bus is populated by ON Semiconductor PCA9653 I/O expander and Analog Devices ADV7511W HDMI transmitter (but we're only describing the former chip now). Based on the original (and large) patch by Vladimir Barinov. Signed-off-by: Vladimir Barinov Signed-off-by: Sergei Shtylyov --- arch/arm64/boot/dts/renesas/r8a77970-eagle.dts | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) Index: renesas/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts =================================================================== --- renesas.orig/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts +++ renesas/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts @@ -57,12 +57,32 @@ clock-frequency = <32768>; }; +&i2c0 { + pinctrl-0 = <&i2c0_pins>; + pinctrl-names = "default"; + + status = "okay"; + clock-frequency = <400000>; + + io_expander: gpio@20 { + compatible = "onnn,pca9654"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + }; +}; + &pfc { avb_pins: avb { groups = "avb0_mdio", "avb0_mii"; function = "avb0"; }; + i2c0_pins: i2c0 { + groups = "i2c0"; + function = "i2c0"; + }; + scif0_pins: scif0 { groups = "scif0_data"; function = "scif0";