From mboxrd@z Thu Jan 1 00:00:00 1970 From: Lukasz Majewski Subject: Re: [PATCH 1/2] ARM: dts: Add the support for display5 equipped with Mitsubishi (800x480) display Date: Fri, 17 Nov 2017 16:27:22 +0100 Message-ID: <20171117162722.0bc19a95@jawa> References: <20171117102404.6678-1-lukma@denx.de> <20171117131047.GE25390@dragon> <20171117151334.041c4684@jawa> <1510929383.8104.3.camel@pengutronix.de> <20171117160347.5c78be6e@jawa> <1510931238.8104.20.camel@pengutronix.de> Mime-Version: 1.0 Content-Type: multipart/signed; micalg=pgp-sha256; boundary="Sig_/no2RLXHX31m3brhTRNIkrgS"; protocol="application/pgp-signature" Return-path: In-Reply-To: <1510931238.8104.20.camel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org> Sender: devicetree-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: Lucas Stach Cc: Shawn Guo , Mark Rutland , Rob Herring , devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, Russell King , linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, Rob Herring , Sascha Hauer , Fabio Estevam , linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org List-Id: devicetree@vger.kernel.org --Sig_/no2RLXHX31m3brhTRNIkrgS Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: quoted-printable On Fri, 17 Nov 2017 16:07:18 +0100 Lucas Stach wrote: > Am Freitag, den 17.11.2017, 16:03 +0100 schrieb Lukasz Majewski: > > Hi Lucas, > > =20 > > > Am Freitag, den 17.11.2017, 15:13 +0100 schrieb Lukasz Majewski: =20 > > > > Hi Shawn, > > > > =C2=A0=C2=A0 =20 > > > > > On Fri, Nov 17, 2017 at 11:24:03AM +0100, Lukasz Majewski > > > > > wrote:=C2=A0=C2=A0 =20 > > > > > > This is the support for aa070mc01-ca1 Mitsubishi display. > > > > > > =20 > > > > > > > > > > > Signed-off-by: Lukasz Majewski =20 > > > > > > --- > > > > > > =C2=A0arch/arm/boot/dts/Makefile=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0= =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2= =A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0|=C2=A0=C2=A01 + > > > > > > =C2=A0.../imx6q-display5-mitsubishi-aa070-800x480.dts=C2=A0=C2= =A0=C2=A0=C2=A0| 51 > > > > > > ++++++++++++++++++++++ 2 files changed, 52 insertions(+) > > > > > > =C2=A0create mode 100644 > > > > > > arch/arm/boot/dts/imx6q-display5-mitsubishi-aa070-800x480.dts > > > > > >=20 > > > > > > diff --git a/arch/arm/boot/dts/Makefile > > > > > > b/arch/arm/boot/dts/Makefile > > > > > > index d9d0c82e7d20..10b3ad078dea 100644 > > > > > > --- a/arch/arm/boot/dts/Makefile > > > > > > +++ b/arch/arm/boot/dts/Makefile > > > > > > @@ -407,6 +407,7 @@ dtb-$(CONFIG_SOC_IMX6Q) +=3D \ =20 > > > > > > > > > > > =C2=A0 imx6q-cm-fx6.dtb \ > > > > > > > > > > > =C2=A0 imx6q-cubox-i.dtb \ > > > > > > > > > > > =C2=A0 imx6q-dfi-fs700-m60.dtb \ > > > > > > > > > > > + > > > > > > > > > > > imx6q-display5-mitsubishi-aa070-800x480.dtb \ > > > > > > > > > > > imx6q-display5-tianma-tm070-1280x768.dtb \ > > > > > > > > > > > imx6q-dmo-edmqmx6.dtb \ =20 > > > > > > =C2=A0 imx6q-evi.dtb \=C2=A0=C2=A0=C2=A0=C2=A0 =20 > > > > >=20 > > > > > > > > > > =C2=A0=C2=A0 =20 > > > > > > +#include "imx6q-display5.dtsi" > > > > > > + > > > > > > +&panel { =20 > > > > > > > > > > > + compatible =3D > > > > > > > > > > > "mitsubishi,aa070mc01-ca1"; =20 > > > > > > +};=C2=A0=C2=A0=C2=A0=C2=A0 =20 > > > > >=20 > > > > > How many DTB files do you want to add for this display5 > > > > > board?=C2=A0=C2=A0=C2=A0=C2=A0 =20 > > > >=20 > > > > This is a single board, which can support panels which I've > > > > posted. > > > >=20 > > > > Those dtbs I do pack to u-boot' FIT image and don't need to > > > > worry that > > > > some display is not working (after setting bootloader env > > > > variable).=20 > > > > > It's > > > > > obvious no fun to maintain a bunch of DTB files for all the > > > > > panels this board can support.=C2=A0=C2=A0 =20 > > > >=20 > > > > Please note that those files excessively use #include > > > > directive, and there is not so much code added (the longest > > > > part is license and comments). > > > > =C2=A0=C2=A0 =20 > > > > > =C2=A0Let's stop right here.=C2=A0=C2=A0 =20 > > > >=20 > > > > If I may ask - how shall I proceed? What would be your > > > > suggestion to move on (dtb overlays) ?=C2=A0=C2=A0 =20 > > >=20 > > > The solution we use for the ZII RDU1 and RDU2 boards is to have > > > the bootloader patch in the correct panel compatible strings.=C2=A0 = =20 > >=20 > > Do you mean adjusting the DTB accordingly in u-boot for each > > display - change panel/compatible to new display name ? =20 >=20 > Exactly. Simply let the bootloader insert the correct panel compatible > string into the DTB. This would complicate a few other things :-), but yes, this seems to be a technically better idea (in terms of final binary size). Thanks for help. >=20 > Regards, > Lucas Best regards, Lukasz Majewski -- DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd-ynQEQJNshbs@public.gmane.org --Sig_/no2RLXHX31m3brhTRNIkrgS Content-Type: application/pgp-signature Content-Description: OpenPGP digital signature -----BEGIN PGP SIGNATURE----- iQEzBAEBCAAdFiEEgAyFJ+N6uu6+XupJAR8vZIA0zr0FAloO/9oACgkQAR8vZIA0 zr1RQgf8D+SZ/jsV0OWah03+Pz0jhHxizM5iBLE9hEZWWseT/Kbela0768+t6f3O +6gV3ydbUXxCXuQj12sdqL5nNbW7mFHco0jMuzcpxI5bGdM39fH8lpMyURBRaoVc cTvZaSH7gOUv+6UCR3xwSWuEJxWzLCDkeQUAhco3DGeVnIvOuYVukmc60cuHfrr8 /+/LRNEEfdbwWIn2VE7IYC8eZVNT4RlaPQYy8gFgTo6etGb4AEEm/nAF5FxXrPuH XBpXtMrqmI8hnMzH/gf0NWcGOjszznLI5dmc60aF0X8PVW2nFiavP5VNuibe3/Qj MBrBJRPrLpVbGP75r4KS2bgdeWlm9g== =RSXr -----END PGP SIGNATURE----- --Sig_/no2RLXHX31m3brhTRNIkrgS-- -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html