From mboxrd@z Thu Jan 1 00:00:00 1970 From: Martin Blumenstingl Subject: [PATCH v2 1/2] ARM: dts: meson8: use stable UART bindings with correct gate clock Date: Fri, 17 Nov 2017 23:58:56 +0100 Message-ID: <20171117225857.9571-2-martin.blumenstingl@googlemail.com> References: <20171117225857.9571-1-martin.blumenstingl@googlemail.com> Return-path: In-Reply-To: <20171117225857.9571-1-martin.blumenstingl-gM/Ye1E23mwN+BqQ9rBEUg@public.gmane.org> Sender: devicetree-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: linux-amlogic-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org, khilman-rdvid1DuHRBWk0Htik3J/w@public.gmane.org, carlo-KA+7E9HrN00dnm+yROfE0A@public.gmane.org Cc: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, narmstrong-rdvid1DuHRBWk0Htik3J/w@public.gmane.org, hgkr.klein-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org, jbrunet-rdvid1DuHRBWk0Htik3J/w@public.gmane.org, Martin Blumenstingl List-Id: devicetree@vger.kernel.org Switch to the stable UART bindings and add the correct gate clocks to the non-AO UART nodes. This fixes the non-AO UARTs if the bootloader didn't un-gate the clocks. Signed-off-by: Martin Blumenstingl Acked-by: Jerome Brunet --- arch/arm/boot/dts/meson8.dtsi | 16 ++++++++++++---- 1 file changed, 12 insertions(+), 4 deletions(-) diff --git a/arch/arm/boot/dts/meson8.dtsi b/arch/arm/boot/dts/meson8.dtsi index 2d7a0752a460..1cab1d7dccde 100644 --- a/arch/arm/boot/dts/meson8.dtsi +++ b/arch/arm/boot/dts/meson8.dtsi @@ -337,19 +337,27 @@ }; &uart_AO { - clocks = <&clkc CLKID_CLK81>; + compatible = "amlogic,meson8-uart", "amlogic,meson-uart"; + clocks = <&clkc CLKID_CLK81>, <&clkc CLKID_XTAL>, <&clkc CLKID_CLK81>; + clock-names = "baud", "xtal", "pclk"; }; &uart_A { - clocks = <&clkc CLKID_CLK81>; + compatible = "amlogic,meson8-uart", "amlogic,meson-uart"; + clocks = <&clkc CLKID_CLK81>, <&clkc CLKID_XTAL>, <&clkc CLKID_UART0>; + clock-names = "baud", "xtal", "pclk"; }; &uart_B { - clocks = <&clkc CLKID_CLK81>; + compatible = "amlogic,meson8-uart", "amlogic,meson-uart"; + clocks = <&clkc CLKID_CLK81>, <&clkc CLKID_XTAL>, <&clkc CLKID_UART1>; + clock-names = "baud", "xtal", "pclk"; }; &uart_C { - clocks = <&clkc CLKID_CLK81>; + compatible = "amlogic,meson8-uart", "amlogic,meson-uart"; + clocks = <&clkc CLKID_CLK81>, <&clkc CLKID_XTAL>, <&clkc CLKID_UART2>; + clock-names = "baud", "xtal", "pclk"; }; &usb0 { -- 2.15.0 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html