From: Niklas Cassel <niklas.cassel@axis.com>
To: linux-arm-kernel@axis.com, linux-pci@vger.kernel.org,
linux-omap@vger.kernel.org
Cc: Niklas Cassel <niklass@axis.com>,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH v5 00/18] dwc MSI fixes, ARTPEC-6 EP mode support, ARTPEC-7 SoC support
Date: Mon, 20 Nov 2017 14:32:03 +0100 [thread overview]
Message-ID: <20171120133222.27771-1-niklas.cassel@axis.com> (raw)
This is a series that adds:
- PCI endpoint mode support in the ARTPEC-6 driver.
- ARTPEC-7 SoC support in the ARTPEC-6 driver (the SoCs are very similar).
- Small fixes for MSI in designware-ep and designware-host,
needed to get endpoint mode support working for ARTPEC-6.
- Cleanups in pci-dra7xx to better prepare for endpoint mode in other
DWC based PCIe drivers.
New in V5:
-Replaced ep->page_size with epc->mem->page_size in patch
("PCI: designware-ep: Pre-allocate memory for MSI in dw_pcie_ep_init") and
in patch ("PCI: designware-ep: Add generic function for raising MSI irq").
-Included a new patch in this patch series:
("PCI: dwc: artpec6: Deassert the core before waiting for PHY").
Niklas Cassel (18):
PCI: dwc: Use the DMA-API to get the MSI address
PCI: designware-ep: dw_pcie_ep_set_msi() should only set MMC bits
PCI: designware-ep: Read-only registers need DBI_RO_WR_EN to be
writable
PCI: designware-ep: Pre-allocate memory for MSI in dw_pcie_ep_init
PCI: designware-ep: Remove static keyword from dw_pcie_ep_reset_bar()
PCI: designware-ep: Add generic function for raising MSI irq
PCI: dwc: dra7xx: Refactor Kconfig and Makefile handling for host/ep
mode
PCI: dwc: dra7xx: Assign pp->ops in dra7xx_add_pcie_port() rather than
in probe
PCI: dwc: dra7xx: Help compiler to remove unused code
PCI: dwc: artpec6: Remove unused defines
PCI: dwc: artpec6: Use BIT and GENMASK macros
PCI: dwc: artpec6: Split artpec6_pcie_establish_link() into smaller
functions
bindings: PCI: artpec: Add support for endpoint mode
PCI: dwc: artpec6: Add support for endpoint mode
PCI: dwc: Make cpu_addr_fixup take struct dw_pcie as argument
PCI: dwc: artpec6: Deassert the core before waiting for PHY
bindings: PCI: artpec: Add support for the ARTPEC-7 SoC
PCI: dwc: artpec6: Add support for the ARTPEC-7 SoC
.../devicetree/bindings/pci/axis,artpec6-pcie.txt | 5 +-
drivers/pci/dwc/Kconfig | 68 +--
drivers/pci/dwc/Makefile | 4 +-
drivers/pci/dwc/pci-dra7xx.c | 27 +-
drivers/pci/dwc/pcie-artpec6.c | 470 ++++++++++++++++++---
drivers/pci/dwc/pcie-designware-ep.c | 59 ++-
drivers/pci/dwc/pcie-designware-host.c | 15 +-
drivers/pci/dwc/pcie-designware.c | 2 +-
drivers/pci/dwc/pcie-designware.h | 22 +-
9 files changed, 554 insertions(+), 118 deletions(-)
--
2.14.2
next reply other threads:[~2017-11-20 13:32 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-11-20 13:32 Niklas Cassel [this message]
[not found] ` <20171120133222.27771-1-niklas.cassel-VrBV9hrLPhE@public.gmane.org>
2017-11-20 13:32 ` [PATCH v5 13/18] bindings: PCI: artpec: Add support for endpoint mode Niklas Cassel
2017-11-20 13:32 ` [PATCH v5 17/18] bindings: PCI: artpec: Add support for the ARTPEC-7 SoC Niklas Cassel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20171120133222.27771-1-niklas.cassel@axis.com \
--to=niklas.cassel@axis.com \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-kernel@axis.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=niklass@axis.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox