From: "Łukasz Stelmach" <l.stelmach@samsung.com>
To: Rob Herring <robh+dt@kernel.org>, Matt Mackall <mpm@selenic.com>,
Herbert Xu <herbert@gondor.apana.org.au>,
Krzysztof Kozlowski <krzk@kernel.org>,
devicetree@vger.kernel.org, linux-crypto@vger.kernel.org,
linux-samsung-soc@vger.kernel.org, linux-kernel@vger.kernel.org
Cc: "Marek Szyprowski" <m.szyprowski@samsung.com>,
"Bartlomiej Zolnierkiewicz" <b.zolnierkie@samsung.com>,
"Łukasz Stelmach" <l.stelmach@samsung.com>
Subject: [PATCH 2/3] hwrng: exynos - add Samsung Exynos True RNG driver
Date: Thu, 23 Nov 2017 16:09:13 +0100 [thread overview]
Message-ID: <20171123150914.31462-3-l.stelmach@samsung.com> (raw)
In-Reply-To: <20171123150914.31462-1-l.stelmach@samsung.com>
Add support for True Random Number Generator found in Samsung Exynos
5250+ SoCs.
Signed-off-by: Łukasz Stelmach <l.stelmach@samsung.com>
---
MAINTAINERS | 7 +
drivers/char/hw_random/Kconfig | 12 ++
drivers/char/hw_random/Makefile | 1 +
drivers/char/hw_random/exynos-trng.c | 256 +++++++++++++++++++++++++++++++++++
4 files changed, 276 insertions(+)
create mode 100644 drivers/char/hw_random/exynos-trng.c
diff --git a/MAINTAINERS b/MAINTAINERS
index 2811a211632c..992074cca612 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -11780,6 +11780,13 @@ S: Maintained
F: drivers/crypto/exynos-rng.c
F: Documentation/devicetree/bindings/rng/samsung,exynos-rng4.txt
+SAMSUNG EXYNOS TRUE RANDOM NUMBER GENERATOR (TRNG) DRIVER
+M: Łukasz Stelmach <l.stelmach@samsung.com>
+L: linux-samsung-soc@vger.kernel.org
+S: Maintained
+F: drivers/char/hw_random/exynos-trng.c
+F: Documentation/devicetree/bindings/rng/samsung,exynos5250-trng.txt
+
SAMSUNG FRAMEBUFFER DRIVER
M: Jingoo Han <jingoohan1@gmail.com>
L: linux-fbdev@vger.kernel.org
diff --git a/drivers/char/hw_random/Kconfig b/drivers/char/hw_random/Kconfig
index 95a031e9eced..a788ac07081b 100644
--- a/drivers/char/hw_random/Kconfig
+++ b/drivers/char/hw_random/Kconfig
@@ -449,6 +449,18 @@ config HW_RANDOM_S390
If unsure, say Y.
+config HW_RANDOM_EXYNOS
+ tristate "Samsung Exynos True Random Number Generator support"
+ depends on ARCH_EXYNOS || COMPILE_TEST
+ default HW_RANDOM
+ ---help---
+ This driver provides support for the True Random Number
+ Generator available in Exynos SoCs.
+
+ To compile this driver as a module, choose M here: the module
+ will be called exynos-trng.
+
+ If unsure, say Y.
endif # HW_RANDOM
config UML_RANDOM
diff --git a/drivers/char/hw_random/Makefile b/drivers/char/hw_random/Makefile
index f3728d008fff..5595df97da7a 100644
--- a/drivers/char/hw_random/Makefile
+++ b/drivers/char/hw_random/Makefile
@@ -14,6 +14,7 @@ obj-$(CONFIG_HW_RANDOM_GEODE) += geode-rng.o
obj-$(CONFIG_HW_RANDOM_N2RNG) += n2-rng.o
n2-rng-y := n2-drv.o n2-asm.o
obj-$(CONFIG_HW_RANDOM_VIA) += via-rng.o
+obj-$(CONFIG_HW_RANDOM_EXYNOS) += exynos-trng.o
obj-$(CONFIG_HW_RANDOM_IXP4XX) += ixp4xx-rng.o
obj-$(CONFIG_HW_RANDOM_OMAP) += omap-rng.o
obj-$(CONFIG_HW_RANDOM_OMAP3_ROM) += omap3-rom-rng.o
diff --git a/drivers/char/hw_random/exynos-trng.c b/drivers/char/hw_random/exynos-trng.c
new file mode 100644
index 000000000000..340e106cae24
--- /dev/null
+++ b/drivers/char/hw_random/exynos-trng.c
@@ -0,0 +1,256 @@
+/*
+ * RNG driver for Exynos TRNGs
+ *
+ * Author: Łukasz Stelmach <l.stelmach@samsung.com>
+ *
+ * Copyright 2017 (c) Samsung Electronics Software, Inc.
+ *
+ * Based on the Exynos PRNG driver drivers/crypto/exynos-rng by
+ * Krzysztof Kozłowski <krzk@kernel.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation;
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk.h>
+#include <linux/crypto.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/hw_random.h>
+#include <linux/io.h>
+#include <linux/iopoll.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+
+#define EXYNOS_TRNG_CLKDIV (0x0)
+#define EXYNOS_TRNG_CTRL (0x20)
+#define EXYNOS_TRNG_POST_CTRL (0x30)
+#define EXYNOS_TRNG_ONLINE_CTRL (0x40)
+#define EXYNOS_TRNG_ONLINE_STAT (0x44)
+#define EXYNOS_TRNG_ONLINE_MAXCHI2 (0x48)
+#define EXYNOS_TRNG_FIFO_CTRL (0x50)
+#define EXYNOS_TRNG_FIFO_0 (0x80)
+#define EXYNOS_TRNG_FIFO_1 (0x84)
+#define EXYNOS_TRNG_FIFO_2 (0x88)
+#define EXYNOS_TRNG_FIFO_3 (0x8c)
+#define EXYNOS_TRNG_FIFO_4 (0x90)
+#define EXYNOS_TRNG_FIFO_5 (0x94)
+#define EXYNOS_TRNG_FIFO_6 (0x98)
+#define EXYNOS_TRNG_FIFO_7 (0x9c)
+#define EXYNOS_TRNG_FIFO_LEN (8)
+#define EXYNOS_TRNG_CLOCK_RATE (500000)
+
+struct exynos_trng_dev {
+ struct device *dev;
+ void __iomem *mem;
+ struct clk *clk;
+ struct hwrng rng;
+};
+
+struct exynos_trng_dev *exynos_trng_dev;
+
+static inline void exynos_trng_set_reg(struct exynos_trng_dev *trng, u16 reg,
+ u32 val)
+{
+ /* Check range of reg? */
+ __raw_writel(val, trng->mem + reg);
+}
+
+static inline u32 exynos_trng_get_reg(struct exynos_trng_dev *trng, u16 reg)
+{
+ /* Check range of reg? */
+ return __raw_readl(trng->mem + reg);
+}
+
+static int exynos_trng_do_read(struct hwrng *rng, void *data, size_t max,
+ bool wait)
+{
+ struct exynos_trng_dev *trng;
+ u32 val;
+
+ max = max > (EXYNOS_TRNG_FIFO_LEN * 4) ?
+ (EXYNOS_TRNG_FIFO_LEN * 4) : max;
+
+ trng = (struct exynos_trng_dev *)rng->priv;
+
+ exynos_trng_set_reg(trng, EXYNOS_TRNG_FIFO_CTRL, max * 8);
+ val = readl_poll_timeout(trng->mem + EXYNOS_TRNG_FIFO_CTRL, val,
+ val == 0, 200, 1000000);
+ if (val < 0)
+ return val;
+
+ memcpy_fromio(data, trng->mem + EXYNOS_TRNG_FIFO_0, max);
+
+ return max;
+}
+
+static int exynos_trng_init(struct hwrng *rng)
+{
+ struct exynos_trng_dev *trng;
+ unsigned long sss_rate;
+ u32 val;
+
+ trng = (struct exynos_trng_dev *)rng->priv;
+ sss_rate = clk_get_rate(trng->clk);
+
+ /* For most TRNG circuits the clock frequency of under 500 kHz
+ * is safe.
+ */
+ val = sss_rate / (EXYNOS_TRNG_CLOCK_RATE * 2);
+ if (val > 0x7fff) {
+ dev_err(trng->dev, "clock divider too large: %d", val);
+ return -ERANGE;
+ }
+ val = val << 1;
+ exynos_trng_set_reg(trng, EXYNOS_TRNG_CLKDIV, val);
+
+ /* Enable the generator. */
+ val = 1 << 31;
+ exynos_trng_set_reg(trng, EXYNOS_TRNG_CTRL, val);
+
+ /* Disable post processing. /dev/hwrng is supposed to deliver
+ * unprocessed data.
+ */
+ exynos_trng_set_reg(trng, EXYNOS_TRNG_POST_CTRL, 0);
+
+ return 0;
+}
+
+static int exynos_trng_probe(struct platform_device *pdev)
+{
+ struct exynos_trng_dev *trng;
+ struct resource *res;
+ int ret = -ENOMEM;
+
+ if (exynos_trng_dev)
+ return -EEXIST;
+
+ trng = devm_kzalloc(&pdev->dev, sizeof(*trng), GFP_KERNEL);
+ if (!trng)
+ goto err_ioremap;
+
+ trng->rng.name = devm_kstrdup(&pdev->dev, dev_name(&pdev->dev),
+ GFP_KERNEL);
+ if (!trng->rng.name)
+ goto err_ioremap;
+
+ trng->rng.init = exynos_trng_init;
+ trng->rng.read = exynos_trng_do_read;
+ trng->rng.priv = (unsigned long) trng;
+
+ platform_set_drvdata(pdev, trng);
+ trng->dev = &pdev->dev;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ trng->mem = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(trng->mem)) {
+ dev_err(&pdev->dev, "Couldn't map IO resources.\n");
+ ret = PTR_ERR(trng->mem);
+ goto err_ioremap;
+ }
+
+ pm_runtime_enable(&pdev->dev);
+ ret = pm_runtime_get_sync(&pdev->dev);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "pm_runtime_get_sync() failed: %d.\n", ret);
+ goto err_ioremap;
+ }
+
+ trng->clk = devm_clk_get(&pdev->dev, "secss");
+ if (IS_ERR(trng->clk)) {
+ /* XXX: EPROBE_DEFER ? */
+ dev_err(&pdev->dev, "Couldn't get clock.\n");
+ ret = PTR_ERR(trng->clk);
+ goto err_clock;
+ }
+
+ ret = clk_prepare_enable(trng->clk);
+ if (ret) {
+ dev_err(&pdev->dev, "Unable to enable the clk: %d.\n", ret);
+ goto err_clock;
+ }
+
+ ret = hwrng_register(&trng->rng);
+ if (ret) {
+ dev_err(&pdev->dev, "Couldn't register hwrng device.\n");
+ goto err_register;
+ }
+
+ dev_info(&pdev->dev, "Exynos True Random Number Generator.\n");
+
+ return 0;
+
+err_register:
+ clk_disable_unprepare(trng->clk);
+
+err_clock:
+ trng->mem = NULL;
+ pm_runtime_put_sync(&pdev->dev);
+ pm_runtime_disable(&pdev->dev);
+
+err_ioremap:
+ dev_err(&pdev->dev, "Initialisation failed.\n");
+ return ret;
+}
+
+static int exynos_trng_remove(struct platform_device *pdev)
+{
+ exynos_trng_dev = NULL;
+
+ return 0;
+}
+
+static int __maybe_unused exynos_trng_suspend(struct device *dev)
+{
+ pm_runtime_put_sync(dev);
+
+ return 0;
+}
+
+static int __maybe_unused exynos_trng_resume(struct device *dev)
+{
+ int ret;
+
+ ret = pm_runtime_get_sync(dev);
+ if (ret < 0) {
+ dev_err(dev, "pm_runtime_get_sync() failed: %d.\n", ret);
+ pm_runtime_put_noidle(dev);
+ return ret;
+ }
+
+ return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(exynos_trng_pm_ops, exynos_trng_suspend,
+ exynos_trng_resume);
+
+static const struct of_device_id exynos_trng_dt_match[] = {
+ {
+ .compatible = "samsung,exynos5250-trng",
+ },
+ { },
+};
+MODULE_DEVICE_TABLE(of, exynos_rng_dt_match);
+
+static struct platform_driver exynos_trng_driver = {
+ .driver = {
+ .name = "exynos-trng",
+ .pm = &exynos_trng_pm_ops,
+ .of_match_table = exynos_trng_dt_match,
+ },
+ .probe = exynos_trng_probe,
+ .remove = exynos_trng_remove,
+};
+
+module_platform_driver(exynos_trng_driver);
+MODULE_AUTHOR("Łukasz Stelmach");
+MODULE_DESCRIPTION("H/W TRNG driver for Exynos chips");
+MODULE_LICENSE("GPL");
--
2.11.0
next prev parent reply other threads:[~2017-11-23 15:09 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <CGME20171123150956eucas1p2e6d42c88692291e4e0d0e7719519bf35@eucas1p2.samsung.com>
2017-11-23 15:09 ` [PATCH 0/3] True RNG driver for Samsung Exynos 5250+ SoCs Łukasz Stelmach
[not found] ` <CGME20171123151002eucas1p207b8eb77fce5a2977a9f520e05dfe9f5@eucas1p2.samsung.com>
[not found] ` <20171123150914.31462-1-l.stelmach-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
2017-11-23 15:09 ` [PATCH 1/3] dt-bindings: hwrng: Add Samsung Exynos 5250+ True RNG bindings Łukasz Stelmach
2017-11-23 16:17 ` Krzysztof Kozlowski
2017-11-26 22:07 ` Rob Herring
[not found] ` <CGME20171123151007eucas1p1cb231b31169771df3f9d57e515057413@eucas1p1.samsung.com>
2017-11-23 15:09 ` Łukasz Stelmach [this message]
2017-11-23 15:45 ` [PATCH 2/3] hwrng: exynos - add Samsung Exynos True RNG driver Andrew F. Davis
2017-11-23 16:31 ` Krzysztof Kozlowski
[not found] ` <CGME20171123184736eucas1p15d4e73d5a6596a6cba1f940dcc473c9a@eucas1p1.samsung.com>
2017-11-23 18:46 ` Łukasz Stelmach
2017-11-24 12:09 ` Krzysztof Kozlowski
2017-11-24 13:05 ` Stephan Müller
[not found] ` <1733513.JRsPYiahIZ-jJGQKZiSfeo1haGO/jJMPxvVK+yQ3ZXh@public.gmane.org>
2017-11-24 14:13 ` Krzysztof Kozlowski
2017-11-24 15:25 ` PrasannaKumar Muralidharan
2017-11-24 15:54 ` PrasannaKumar Muralidharan
[not found] ` <CGME20171127072355eucas1p218e3cbaeb1ba16b5a1262deda350d850@eucas1p2.samsung.com>
2017-11-27 7:23 ` Łukasz Stelmach
[not found] ` <CGME20171123151008eucas1p24436487b1b3f8de6d8cc768f05aea7a9@eucas1p2.samsung.com>
2017-11-23 15:09 ` [PATCH 3/3] ARM: dts: exynos: Add nodes for True Random Number Generator Łukasz Stelmach
2017-11-23 16:33 ` Krzysztof Kozlowski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20171123150914.31462-3-l.stelmach@samsung.com \
--to=l.stelmach@samsung.com \
--cc=b.zolnierkie@samsung.com \
--cc=devicetree@vger.kernel.org \
--cc=herbert@gondor.apana.org.au \
--cc=krzk@kernel.org \
--cc=linux-crypto@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=m.szyprowski@samsung.com \
--cc=mpm@selenic.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).