From: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
To: Simon Horman <horms@verge.net.au>,
Rob Herring <robh+dt@kernel.org>,
Catalin Marinas <catalin.marinas@arm.com>,
Will Deacon <will.deacon@arm.com>,
linux-renesas-soc@vger.kernel.org, devicetree@vger.kernel.org
Cc: Magnus Damm <magnus.damm@gmail.com>,
Mark Rutland <mark.rutland@arm.com>,
linux-arm-kernel@lists.infradead.org,
Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Subject: [PATCH 2/2] arm64: dts: renesas: r8a77970: use SYSC power domain macros
Date: Tue, 28 Nov 2017 23:15:45 +0300 [thread overview]
Message-ID: <20171128202109.031715810@cogentembedded.com> (raw)
[-- Attachment #1: arm64-dts-renesas-r8a77970-use-SYSC-power-domain-macros.patch --]
[-- Type: text/plain, Size: 4948 bytes --]
Now that the commit 833bdb47c826 ("dt-bindings: power: add R8A77970 SYSC
power domain definitions") has hit Linus' tree, we can replace the bare
numbers (we had to use to avoid a cross tree dependency) with these macro
definitions...
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
---
arch/arm64/boot/dts/renesas/r8a77970.dtsi | 32 +++++++++++++++---------------
1 file changed, 16 insertions(+), 16 deletions(-)
Index: renesas/arch/arm64/boot/dts/renesas/r8a77970.dtsi
===================================================================
--- renesas.orig/arch/arm64/boot/dts/renesas/r8a77970.dtsi
+++ renesas/arch/arm64/boot/dts/renesas/r8a77970.dtsi
@@ -33,14 +33,14 @@
compatible = "arm,cortex-a53", "arm,armv8";
reg = <0>;
clocks = <&cpg CPG_CORE R8A77970_CLK_Z2>;
- power-domains = <&sysc 5>;
+ power-domains = <&sysc R8A77970_PD_CA53_CPU0>;
next-level-cache = <&L2_CA53>;
enable-method = "psci";
};
L2_CA53: cache-controller {
compatible = "cache";
- power-domains = <&sysc 21>;
+ power-domains = <&sysc R8A77970_PD_CA53_SCU>;
cache-unified;
cache-level = <2>;
};
@@ -88,7 +88,7 @@
IRQ_TYPE_LEVEL_HIGH)>;
clocks = <&cpg CPG_MOD 408>;
clock-names = "clk";
- power-domains = <&sysc 32>;
+ power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
resets = <&cpg 408>;
};
@@ -109,7 +109,7 @@
"renesas,rcar-gen3-wdt";
reg = <0 0xe6020000 0 0x0c>;
clocks = <&cpg CPG_MOD 402>;
- power-domains = <&sysc 32>;
+ power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
resets = <&cpg 402>;
status = "disabled";
};
@@ -190,7 +190,7 @@
GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH
GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 407>;
- power-domains = <&sysc 32>;
+ power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
resets = <&cpg 407>;
};
@@ -217,7 +217,7 @@
"ch4", "ch5", "ch6", "ch7";
clocks = <&cpg CPG_MOD 218>;
clock-names = "fck";
- power-domains = <&sysc 32>;
+ power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
resets = <&cpg 218>;
#dma-cells = <1>;
dma-channels = <8>;
@@ -245,7 +245,7 @@
"ch4", "ch5", "ch6", "ch7";
clocks = <&cpg CPG_MOD 217>;
clock-names = "fck";
- power-domains = <&sysc 32>;
+ power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
resets = <&cpg 217>;
#dma-cells = <1>;
dma-channels = <8>;
@@ -268,7 +268,7 @@
dmas = <&dmac1 0x31>, <&dmac1 0x30>,
<&dmac2 0x31>, <&dmac2 0x30>;
dma-names = "tx", "rx", "tx", "rx";
- power-domains = <&sysc 32>;
+ power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
resets = <&cpg 520>;
status = "disabled";
};
@@ -286,7 +286,7 @@
dmas = <&dmac1 0x33>, <&dmac1 0x32>,
<&dmac2 0x33>, <&dmac2 0x32>;
dma-names = "tx", "rx", "tx", "rx";
- power-domains = <&sysc 32>;
+ power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
resets = <&cpg 519>;
status = "disabled";
};
@@ -304,7 +304,7 @@
dmas = <&dmac1 0x35>, <&dmac1 0x34>,
<&dmac2 0x35>, <&dmac2 0x34>;
dma-names = "tx", "rx", "tx", "rx";
- power-domains = <&sysc 32>;
+ power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
resets = <&cpg 518>;
status = "disabled";
};
@@ -321,7 +321,7 @@
dmas = <&dmac1 0x37>, <&dmac1 0x36>,
<&dmac2 0x37>, <&dmac2 0x36>;
dma-names = "tx", "rx", "tx", "rx";
- power-domains = <&sysc 32>;
+ power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
resets = <&cpg 517>;
status = "disabled";
};
@@ -339,7 +339,7 @@
dmas = <&dmac1 0x51>, <&dmac1 0x50>,
<&dmac2 0x51>, <&dmac2 0x50>;
dma-names = "tx", "rx", "tx", "rx";
- power-domains = <&sysc 32>;
+ power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
resets = <&cpg 207>;
status = "disabled";
};
@@ -357,7 +357,7 @@
dmas = <&dmac1 0x53>, <&dmac1 0x52>,
<&dmac2 0x53>, <&dmac2 0x52>;
dma-names = "tx", "rx", "tx", "rx";
- power-domains = <&sysc 32>;
+ power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
resets = <&cpg 206>;
status = "disabled";
};
@@ -375,7 +375,7 @@
dmas = <&dmac1 0x57>, <&dmac1 0x56>,
<&dmac2 0x57>, <&dmac2 0x56>;
dma-names = "tx", "rx", "tx", "rx";
- power-domains = <&sysc 32>;
+ power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
resets = <&cpg 204>;
status = "disabled";
};
@@ -392,7 +392,7 @@
dmas = <&dmac1 0x59>, <&dmac1 0x58>,
<&dmac2 0x59>, <&dmac2 0x58>;
dma-names = "tx", "rx", "tx", "rx";
- power-domains = <&sysc 32>;
+ power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
resets = <&cpg 203>;
status = "disabled";
};
@@ -434,7 +434,7 @@
"ch20", "ch21", "ch22", "ch23",
"ch24";
clocks = <&cpg CPG_MOD 812>;
- power-domains = <&sysc 32>;
+ power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
resets = <&cpg 812>;
phy-mode = "rgmii-id";
iommus = <&ipmmu_rt 3>;
next reply other threads:[~2017-11-28 20:15 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-11-28 20:15 Sergei Shtylyov [this message]
[not found] ` <20171128202109.031715810-M4DtvfQ/ZS1MRgGoP+s0PdBPR1lH4CV8@public.gmane.org>
2017-11-29 9:56 ` [PATCH 2/2] arm64: dts: renesas: r8a77970: use SYSC power domain macros Simon Horman
2017-12-04 10:02 ` Geert Uytterhoeven
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20171128202109.031715810@cogentembedded.com \
--to=sergei.shtylyov@cogentembedded.com \
--cc=catalin.marinas@arm.com \
--cc=devicetree@vger.kernel.org \
--cc=horms@verge.net.au \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=magnus.damm@gmail.com \
--cc=mark.rutland@arm.com \
--cc=robh+dt@kernel.org \
--cc=will.deacon@arm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).