From mboxrd@z Thu Jan 1 00:00:00 1970 From: Bjorn Andersson Subject: [PATCH v2] rpmsg: qcom_smd: Access APCS through mailbox framework Date: Wed, 29 Nov 2017 16:02:33 -0800 Message-ID: <20171130000233.23804-1-bjorn.andersson@linaro.org> Return-path: Sender: devicetree-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: Rob Herring , Mark Rutland , Ohad Ben-Cohen , Bjorn Andersson Cc: linux-arm-msm-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-soc-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-remoteproc-u79uwXL29TY76Z2rM5mHXA@public.gmane.org List-Id: devicetree@vger.kernel.org Attempt to acquire the APCS IPC through the mailbox framework and fall back to the old syscon based approach, to allow us to move away from using the syscon. Reviewed-by: Arun Kumar Neelakantam Signed-off-by: Bjorn Andersson --- Changes since v1: - Added dt binding change .../devicetree/bindings/soc/qcom/qcom,smd.txt | 8 ++- drivers/rpmsg/Kconfig | 1 + drivers/rpmsg/qcom_smd.c | 62 +++++++++++++++------- 3 files changed, 51 insertions(+), 20 deletions(-) diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,smd.txt b/Documentation/devicetree/bindings/soc/qcom/qcom,smd.txt index ea1dc75ec9ea..234ae2256501 100644 --- a/Documentation/devicetree/bindings/soc/qcom/qcom,smd.txt +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,smd.txt @@ -22,9 +22,15 @@ The edge is described by the following properties: Definition: should specify the IRQ used by the remote processor to signal this processor about communication related updates -- qcom,ipc: +- mboxes: Usage: required Value type: + Definition: reference to the associated doorbell in APCS, as described + in mailbox/mailbox.txt + +- qcom,ipc: + Usage: required, unless mboxes is specified + Value type: Definition: three entries specifying the outgoing ipc bit used for signaling the remote processor: - phandle to a syscon node representing the apcs registers diff --git a/drivers/rpmsg/Kconfig b/drivers/rpmsg/Kconfig index 65a9f6b892f0..9b14090e3603 100644 --- a/drivers/rpmsg/Kconfig +++ b/drivers/rpmsg/Kconfig @@ -39,6 +39,7 @@ config RPMSG_QCOM_GLINK_SMEM config RPMSG_QCOM_SMD tristate "Qualcomm Shared Memory Driver (SMD)" + depends on MAILBOX depends on QCOM_SMEM select RPMSG help diff --git a/drivers/rpmsg/qcom_smd.c b/drivers/rpmsg/qcom_smd.c index b01774e9fac0..ef2a526ebc8f 100644 --- a/drivers/rpmsg/qcom_smd.c +++ b/drivers/rpmsg/qcom_smd.c @@ -14,6 +14,7 @@ #include #include +#include #include #include #include @@ -107,6 +108,8 @@ static const struct { * @ipc_regmap: regmap handle holding the outgoing ipc register * @ipc_offset: offset within @ipc_regmap of the register for ipc * @ipc_bit: bit in the register at @ipc_offset of @ipc_regmap + * @mbox_client: mailbox client handle + * @mbox_chan: apcs ipc mailbox channel handle * @channels: list of all channels detected on this edge * @channels_lock: guard for modifications of @channels * @allocated: array of bitmaps representing already allocated channels @@ -129,6 +132,9 @@ struct qcom_smd_edge { int ipc_offset; int ipc_bit; + struct mbox_client mbox_client; + struct mbox_chan *mbox_chan; + struct list_head channels; spinlock_t channels_lock; @@ -365,7 +371,12 @@ static void qcom_smd_signal_channel(struct qcom_smd_channel *channel) { struct qcom_smd_edge *edge = channel->edge; - regmap_write(edge->ipc_regmap, edge->ipc_offset, BIT(edge->ipc_bit)); + if (edge->mbox_chan) { + mbox_send_message(edge->mbox_chan, NULL); + mbox_client_txdone(edge->mbox_chan, 0); + } else { + regmap_write(edge->ipc_regmap, edge->ipc_offset, BIT(edge->ipc_bit)); + } } /* @@ -1268,27 +1279,37 @@ static int qcom_smd_parse_edge(struct device *dev, key = "qcom,remote-pid"; of_property_read_u32(node, key, &edge->remote_pid); - syscon_np = of_parse_phandle(node, "qcom,ipc", 0); - if (!syscon_np) { - dev_err(dev, "no qcom,ipc node\n"); - return -ENODEV; - } + edge->mbox_client.dev = dev; + edge->mbox_client.knows_txdone = true; + edge->mbox_chan = mbox_request_channel(&edge->mbox_client, 0); + if (IS_ERR(edge->mbox_chan)) { + if (PTR_ERR(edge->mbox_chan) != -ENODEV) + return PTR_ERR(edge->mbox_chan); - edge->ipc_regmap = syscon_node_to_regmap(syscon_np); - if (IS_ERR(edge->ipc_regmap)) - return PTR_ERR(edge->ipc_regmap); + edge->mbox_chan = NULL; - key = "qcom,ipc"; - ret = of_property_read_u32_index(node, key, 1, &edge->ipc_offset); - if (ret < 0) { - dev_err(dev, "no offset in %s\n", key); - return -EINVAL; - } + syscon_np = of_parse_phandle(node, "qcom,ipc", 0); + if (!syscon_np) { + dev_err(dev, "no qcom,ipc node\n"); + return -ENODEV; + } - ret = of_property_read_u32_index(node, key, 2, &edge->ipc_bit); - if (ret < 0) { - dev_err(dev, "no bit in %s\n", key); - return -EINVAL; + edge->ipc_regmap = syscon_node_to_regmap(syscon_np); + if (IS_ERR(edge->ipc_regmap)) + return PTR_ERR(edge->ipc_regmap); + + key = "qcom,ipc"; + ret = of_property_read_u32_index(node, key, 1, &edge->ipc_offset); + if (ret < 0) { + dev_err(dev, "no offset in %s\n", key); + return -EINVAL; + } + + ret = of_property_read_u32_index(node, key, 2, &edge->ipc_bit); + if (ret < 0) { + dev_err(dev, "no bit in %s\n", key); + return -EINVAL; + } } ret = of_property_read_string(node, "label", &edge->name); @@ -1394,6 +1415,8 @@ struct qcom_smd_edge *qcom_smd_register_edge(struct device *parent, return edge; unregister_dev: + if (!IS_ERR_OR_NULL(edge->mbox_chan)) + mbox_free_channel(edge->mbox_chan); put_device(&edge->dev); return ERR_PTR(ret); } @@ -1422,6 +1445,7 @@ int qcom_smd_unregister_edge(struct qcom_smd_edge *edge) if (ret) dev_warn(&edge->dev, "can't remove smd device: %d\n", ret); + mbox_free_channel(edge->mbox_chan); device_unregister(&edge->dev); return 0; -- 2.15.0 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html