From: tyler@opensourcefoundries.com
To: shawnguo@kernel.org, fabio.estevam@nxp.com, kernel@pengutronix.de
Cc: robh+dt@kernel.org, mark.rutland@arm.com,
linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org,
Tyler Baker <tyler@opensourcefoundries.com>
Subject: [PATCH 0/8] ARM: dts: introduce Compulab IoT Gateway
Date: Thu, 30 Nov 2017 12:14:26 -0800 [thread overview]
Message-ID: <20171130201434.14122-1-tyler@opensourcefoundries.com> (raw)
From: Tyler Baker <tyler@opensourcefoundries.com>
The Compulab IoT Gateway is based on an NXP i.MX7D, dual core
Cortex-A7 clocking at 1GHz. It supports up to 2GB of DDR3,
and 32GB of eMMC flash. Onboard, there are two gigabit
ethernet controllers, 4 x USB2, RS485, and CAN.
It uses the same SoM as the cl-som-imx7, but includes a baseboard
with additional I/O.
Compulab has provided patches for this platform based on v4.1.
I've used these patches as reference to get things working on tip.
The entire series is based on v4.15-rc1.
Tyler Baker (8):
ARM: dts: imx7d-sbc-iot: add initial iot gateway dts
ARM: dts: imx7: build imx7d-sbc-iot-imx7 dtb
ARM: dts: imx7d-cl-som: add nodes for usbh, and usbotg2
ARM: dts: imx7s: add dma support
ARM: dts: imx7s: add node and supplies for vdd1p2
ARM: dts: imx7d-sbc-iot: enable PCIe peripheral
ARM: dts: imx7s: add usb hsic phy domain
PCIe: imx6: imx7d: add support for phy refclk source
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/imx7d-cl-som-imx7.dts | 36 ++++-
arch/arm/boot/dts/imx7d-sbc-iot-imx7.dts | 252 +++++++++++++++++++++++++++++++
arch/arm/boot/dts/imx7s.dtsi | 29 +++-
drivers/pci/dwc/pci-imx6.c | 8 +-
5 files changed, 316 insertions(+), 10 deletions(-)
create mode 100644 arch/arm/boot/dts/imx7d-sbc-iot-imx7.dts
--
2.9.3
next reply other threads:[~2017-11-30 20:14 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-11-30 20:14 tyler [this message]
[not found] ` <20171130201434.14122-1-tyler-yzvPICuk2AAEdKtRPRuaE5USO3DlRtUf@public.gmane.org>
2017-11-30 20:14 ` [PATCH 1/8] ARM: dts: imx7d-sbc-iot: add initial iot gateway dts tyler-yzvPICuk2AAEdKtRPRuaE5USO3DlRtUf
[not found] ` <20171130201434.14122-2-tyler-yzvPICuk2AAEdKtRPRuaE5USO3DlRtUf@public.gmane.org>
2017-12-01 20:10 ` Fabio Estevam
[not found] ` <CAOMZO5DAEMCnEoD_k8d787wk392zYMoKkiMM-TOcRco9UJL2Lw-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2017-12-05 20:58 ` Tyler Baker
2017-11-30 20:14 ` [PATCH 4/8] ARM: dts: imx7s: add dma support tyler-yzvPICuk2AAEdKtRPRuaE5USO3DlRtUf
[not found] ` <20171130201434.14122-5-tyler-yzvPICuk2AAEdKtRPRuaE5USO3DlRtUf@public.gmane.org>
2017-12-01 20:17 ` Fabio Estevam
2017-12-05 20:59 ` Tyler Baker
2017-11-30 20:14 ` [PATCH 7/8] ARM: dts: imx7s: add usb hsic phy domain tyler-yzvPICuk2AAEdKtRPRuaE5USO3DlRtUf
2017-11-30 20:14 ` [PATCH 2/8] ARM: dts: imx7: build imx7d-sbc-iot-imx7 dtb tyler
2017-12-01 20:11 ` Fabio Estevam
2017-12-05 20:58 ` Tyler Baker
2017-11-30 20:14 ` [PATCH 3/8] ARM: dts: imx7d-cl-som: add nodes for usbh, and usbotg2 tyler
2017-12-01 20:13 ` Fabio Estevam
2017-12-05 20:59 ` Tyler Baker
2017-11-30 20:14 ` [PATCH 5/8] ARM: dts: imx7s: add node and supplies for vdd1p2 tyler
2017-11-30 20:14 ` [PATCH 6/8] ARM: dts: imx7d-sbc-iot: enable PCIe peripheral tyler
2017-11-30 20:14 ` [PATCH 8/8] PCIe: imx6: imx7d: add support for phy refclk source tyler
[not found] ` <20171130201434.14122-9-tyler-yzvPICuk2AAEdKtRPRuaE5USO3DlRtUf@public.gmane.org>
2017-12-01 20:21 ` Fabio Estevam
[not found] ` <CAOMZO5Cxavb+iXdxH=JiWzP4VVo-ue0PU-LjBE6kD1VBPgW_0g-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2017-12-05 20:58 ` Tyler Baker
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20171130201434.14122-1-tyler@opensourcefoundries.com \
--to=tyler@opensourcefoundries.com \
--cc=devicetree@vger.kernel.org \
--cc=fabio.estevam@nxp.com \
--cc=kernel@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=robh+dt@kernel.org \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).