[PATCH v5 00/13] Add STM32 DFSDM support

[PATCH v5 00/13] Add STM32 DFSDM support

[Arnaud Pouliquen]

Hello,

Here is a new version integrating remarks from Rob and Jonathan.

Main deltas vs V4:
- Integrate ASOC DAI not as a subnode of the DFSDM.
- Add in kernel consumer interface to allow to manipulate attribute.

Context reminder:
-----------------

DFSDM peripheral is a peripheral that allows to connect some sigma delta ADCs
or PDM microphones via a SPI or Manchester bus.
DFSDM integrates digital filters to offer up to 24 bits final resolution.

In term of SW architecture. 2 use-cases have to be supported:

1) Sigma delta ADC conversion through IIO framework.
Sigma delta ADC is handled by generic sigma delta modulator driver. 
DFSDM peripheral is binded to a SD modulator ADC using the IIO HW consumer interface. 
Please notice that IIO HW consumer interface has be proposed by Lars, but is
part of this patchset with Lars's agreement.
User interface is IIO one.
Notice that this patch-set propose only a raw conversion, to simplify review.
Buffer and trigger management will be added in next patch-sets.

2) PDM microphone record through ALSA framework.
PDM microphone is handled by ASOC Generic DMIC codec driver.
ADFSDM ASOC DAI driver is binded to IIO driver using the IIO consumer interface
ADFSDM ASOC DAI driver is binded to a PDM microphone ASOC component using ASOC Of_graph.
User interface is ALSA one.
As IIO DMA management is not adapted to an audio realtime stream. A specific DMA 
management has been implemented in IIO driver for audio purposes.

Regards,
Arnaud



Arnaud Pouliquen (12):
  docs: driver-api: add iio hw consumer section
  IIO: hw_consumer: add devm_iio_hw_consumer_alloc
  IIO: inkern: API for manipulating channel attributes
  IIO: Add DT bindings for sigma delta adc modulator
  IIO: ADC: add sigma delta modulator support
  IIO: add DT bindings for stm32 DFSDM filter
  IIO: ADC: add stm32 DFSDM core support
  IIO: ADC: add STM32 DFSDM sigma delta ADC support
  IIO: ADC: add stm32 DFSDM support for PDM microphone
  IIO: consumer: allow to set buffer sizes
  ASoC: add bindings for stm32 DFSDM filter
  ASoC: stm32: add DFSDM DAI support

Lars-Peter Clausen (1):
  iio: Add hardware consumer buffer support

 .../ABI/testing/sysfs-bus-iio-dfsdm-adc-stm32      |   16 +
 .../bindings/iio/adc/sigma-delta-modulator.txt     |   13 +
 .../bindings/iio/adc/st,stm32-dfsdm-adc.txt        |  127 ++
 .../devicetree/bindings/sound/st,stm32-adfsdm.txt  |   62 +
 Documentation/driver-api/iio/hw-consumer.rst       |   51 +
 Documentation/driver-api/iio/index.rst             |    1 +
 drivers/iio/adc/Kconfig                            |   37 +
 drivers/iio/adc/Makefile                           |    3 +
 drivers/iio/adc/sd_adc_modulator.c                 |   81 ++
 drivers/iio/adc/stm32-dfsdm-adc.c                  | 1232 ++++++++++++++++++++
 drivers/iio/adc/stm32-dfsdm-core.c                 |  318 +++++
 drivers/iio/adc/stm32-dfsdm.h                      |  319 +++++
 drivers/iio/buffer/Kconfig                         |   10 +
 drivers/iio/buffer/Makefile                        |    1 +
 drivers/iio/buffer/industrialio-buffer-cb.c        |   11 +
 drivers/iio/buffer/industrialio-hw-consumer.c      |  248 ++++
 drivers/iio/inkern.c                               |   18 +-
 include/linux/iio/adc/stm32-dfsdm-adc.h            |   28 +
 include/linux/iio/consumer.h                       |   37 +
 include/linux/iio/hw-consumer.h                    |   22 +
 sound/soc/stm/Kconfig                              |   11 +
 sound/soc/stm/Makefile                             |    3 +
 sound/soc/stm/stm32_adfsdm.c                       |  386 ++++++
 23 files changed, 3030 insertions(+), 5 deletions(-)
 create mode 100644 Documentation/ABI/testing/sysfs-bus-iio-dfsdm-adc-stm32
 create mode 100644 Documentation/devicetree/bindings/iio/adc/sigma-delta-modulator.txt
 create mode 100644 Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.txt
 create mode 100644 Documentation/devicetree/bindings/sound/st,stm32-adfsdm.txt
 create mode 100644 Documentation/driver-api/iio/hw-consumer.rst
 create mode 100644 drivers/iio/adc/sd_adc_modulator.c
 create mode 100644 drivers/iio/adc/stm32-dfsdm-adc.c
 create mode 100644 drivers/iio/adc/stm32-dfsdm-core.c
 create mode 100644 drivers/iio/adc/stm32-dfsdm.h
 create mode 100644 drivers/iio/buffer/industrialio-hw-consumer.c
 create mode 100644 include/linux/iio/adc/stm32-dfsdm-adc.h
 create mode 100644 include/linux/iio/hw-consumer.h
 create mode 100644 sound/soc/stm/stm32_adfsdm.c

-- 
2.7.4

[PATCH v5 01/13] iio: Add hardware consumer buffer support

[Arnaud Pouliquen]

From: Lars-Peter Clausen <lars@metafoo.de>

Hardware consumer interface can be used when one IIO device has
a direct connection to another device in hardware.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@st.com>
---
V4->V5: No delta.

 drivers/iio/buffer/Kconfig                    |  10 ++
 drivers/iio/buffer/Makefile                   |   1 +
 drivers/iio/buffer/industrialio-hw-consumer.c | 182 ++++++++++++++++++++++++++
 include/linux/iio/hw-consumer.h               |  20 +++
 4 files changed, 213 insertions(+)
 create mode 100644 drivers/iio/buffer/industrialio-hw-consumer.c
 create mode 100644 include/linux/iio/hw-consumer.h

diff --git a/drivers/iio/buffer/Kconfig b/drivers/iio/buffer/Kconfig
index 4ffd3db..338774c 100644
--- a/drivers/iio/buffer/Kconfig
+++ b/drivers/iio/buffer/Kconfig
@@ -29,6 +29,16 @@ config IIO_BUFFER_DMAENGINE
 
 	  Should be selected by drivers that want to use this functionality.
 
+config IIO_BUFFER_HW_CONSUMER
+	tristate "Industrial I/O HW buffering"
+	help
+	  Provides a way to bonding when an IIO device has a direct connection
+	  to another device in hardware. In this case buffers for data transfers
+	  are handled by hardware.
+
+	  Should be selected by drivers that want to use the generic Hw consumer
+	  interface.
+
 config IIO_KFIFO_BUF
 	tristate "Industrial I/O buffering based on kfifo"
 	help
diff --git a/drivers/iio/buffer/Makefile b/drivers/iio/buffer/Makefile
index 85beaae..324a36b 100644
--- a/drivers/iio/buffer/Makefile
+++ b/drivers/iio/buffer/Makefile
@@ -6,5 +6,6 @@
 obj-$(CONFIG_IIO_BUFFER_CB) += industrialio-buffer-cb.o
 obj-$(CONFIG_IIO_BUFFER_DMA) += industrialio-buffer-dma.o
 obj-$(CONFIG_IIO_BUFFER_DMAENGINE) += industrialio-buffer-dmaengine.o
+obj-$(CONFIG_IIO_BUFFER_HW_CONSUMER) += industrialio-hw-consumer.o
 obj-$(CONFIG_IIO_TRIGGERED_BUFFER) += industrialio-triggered-buffer.o
 obj-$(CONFIG_IIO_KFIFO_BUF) += kfifo_buf.o
diff --git a/drivers/iio/buffer/industrialio-hw-consumer.c b/drivers/iio/buffer/industrialio-hw-consumer.c
new file mode 100644
index 0000000..0253be1
--- /dev/null
+++ b/drivers/iio/buffer/industrialio-hw-consumer.c
@@ -0,0 +1,182 @@
+/*
+ * Copyright 2017 Analog Devices Inc.
+ *  Author: Lars-Peter Clausen <lars@metafoo.de>
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <linux/err.h>
+#include <linux/export.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+
+#include <linux/iio/iio.h>
+#include <linux/iio/consumer.h>
+#include <linux/iio/hw-consumer.h>
+#include <linux/iio/buffer_impl.h>
+
+/**
+ * struct iio_hw_consumer - IIO hw consumer block
+ * @buffers: hardware buffers list head.
+ * @channels: IIO provider channels.
+ */
+struct iio_hw_consumer {
+	struct list_head buffers;
+	struct iio_channel *channels;
+};
+
+struct hw_consumer_buffer {
+	struct list_head head;
+	struct iio_dev *indio_dev;
+	struct iio_buffer buffer;
+	long scan_mask[];
+};
+
+static struct hw_consumer_buffer *iio_buffer_to_hw_consumer_buffer(
+	struct iio_buffer *buffer)
+{
+	return container_of(buffer, struct hw_consumer_buffer, buffer);
+}
+
+static void iio_hw_buf_release(struct iio_buffer *buffer)
+{
+	struct hw_consumer_buffer *hw_buf =
+		iio_buffer_to_hw_consumer_buffer(buffer);
+	kfree(hw_buf);
+}
+
+static const struct iio_buffer_access_funcs iio_hw_buf_access = {
+	.release = &iio_hw_buf_release,
+	.modes = INDIO_BUFFER_HARDWARE,
+};
+
+static struct hw_consumer_buffer *iio_hw_consumer_get_buffer(
+	struct iio_hw_consumer *hwc, struct iio_dev *indio_dev)
+{
+	size_t mask_size = BITS_TO_LONGS(indio_dev->masklength) * sizeof(long);
+	struct hw_consumer_buffer *buf;
+
+	list_for_each_entry(buf, &hwc->buffers, head) {
+		if (buf->indio_dev == indio_dev)
+			return buf;
+	}
+
+	buf = kzalloc(sizeof(*buf) + mask_size, GFP_KERNEL);
+	if (!buf)
+		return NULL;
+
+	buf->buffer.access = &iio_hw_buf_access;
+	buf->indio_dev = indio_dev;
+	buf->buffer.scan_mask = buf->scan_mask;
+
+	iio_buffer_init(&buf->buffer);
+	list_add_tail(&buf->head, &hwc->buffers);
+
+	return buf;
+}
+
+/**
+ * iio_hw_consumer_alloc() - Allocate IIO hardware consumer
+ * @dev: Pointer to consumer device.
+ *
+ * Returns a valid iio_hw_consumer on success or a ERR_PTR() on failure.
+ */
+struct iio_hw_consumer *iio_hw_consumer_alloc(struct device *dev)
+{
+	struct hw_consumer_buffer *buf;
+	struct iio_hw_consumer *hwc;
+	struct iio_channel *chan;
+	int ret;
+
+	hwc = kzalloc(sizeof(*hwc), GFP_KERNEL);
+	if (!hwc)
+		return ERR_PTR(-ENOMEM);
+
+	INIT_LIST_HEAD(&hwc->buffers);
+
+	hwc->channels = iio_channel_get_all(dev);
+	if (IS_ERR(hwc->channels)) {
+		ret = PTR_ERR(hwc->channels);
+		goto err_free_hwc;
+	}
+
+	chan = &hwc->channels[0];
+	while (chan->indio_dev) {
+		buf = iio_hw_consumer_get_buffer(hwc, chan->indio_dev);
+		if (!buf) {
+			ret = -ENOMEM;
+			goto err_put_buffers;
+		}
+		set_bit(chan->channel->scan_index, buf->buffer.scan_mask);
+		chan++;
+	}
+
+	return hwc;
+
+err_put_buffers:
+	list_for_each_entry(buf, &hwc->buffers, head)
+		iio_buffer_put(&buf->buffer);
+	iio_channel_release_all(hwc->channels);
+err_free_hwc:
+	kfree(hwc);
+	return ERR_PTR(ret);
+}
+EXPORT_SYMBOL_GPL(iio_hw_consumer_alloc);
+
+/**
+ * iio_hw_consumer_free() - Free IIO hardware consumer
+ * @hwc: hw consumer to free.
+ */
+void iio_hw_consumer_free(struct iio_hw_consumer *hwc)
+{
+	struct hw_consumer_buffer *buf, *n;
+
+	iio_channel_release_all(hwc->channels);
+	list_for_each_entry_safe(buf, n, &hwc->buffers, head)
+		iio_buffer_put(&buf->buffer);
+	kfree(hwc);
+}
+EXPORT_SYMBOL_GPL(iio_hw_consumer_free);
+
+/**
+ * iio_hw_consumer_enable() - Enable IIO hardware consumer
+ * @hwc: iio_hw_consumer to enable.
+ *
+ * Returns 0 on success.
+ */
+int iio_hw_consumer_enable(struct iio_hw_consumer *hwc)
+{
+	struct hw_consumer_buffer *buf;
+	int ret;
+
+	list_for_each_entry(buf, &hwc->buffers, head) {
+		ret = iio_update_buffers(buf->indio_dev, &buf->buffer, NULL);
+		if (ret)
+			goto err_disable_buffers;
+	}
+
+	return 0;
+
+err_disable_buffers:
+	list_for_each_entry_continue_reverse(buf, &hwc->buffers, head)
+		iio_update_buffers(buf->indio_dev, NULL, &buf->buffer);
+	return ret;
+}
+EXPORT_SYMBOL_GPL(iio_hw_consumer_enable);
+
+/**
+ * iio_hw_consumer_disable() - Disable IIO hardware consumer
+ * @hwc: iio_hw_consumer to disable.
+ */
+void iio_hw_consumer_disable(struct iio_hw_consumer *hwc)
+{
+	struct hw_consumer_buffer *buf;
+
+	list_for_each_entry(buf, &hwc->buffers, head)
+		iio_update_buffers(buf->indio_dev, NULL, &buf->buffer);
+}
+EXPORT_SYMBOL_GPL(iio_hw_consumer_disable);
+
+MODULE_AUTHOR("Lars-Peter Clausen <lars@metafoo.de>");
+MODULE_DESCRIPTION("Hardware consumer buffer the IIO framework");
+MODULE_LICENSE("GPL v2");
diff --git a/include/linux/iio/hw-consumer.h b/include/linux/iio/hw-consumer.h
new file mode 100644
index 0000000..f16791b
--- /dev/null
+++ b/include/linux/iio/hw-consumer.h
@@ -0,0 +1,20 @@
+/*
+ * Industrial I/O in kernel hardware consumer interface
+ *
+ * Copyright 2017 Analog Devices Inc.
+ *  Author: Lars-Peter Clausen <lars@metafoo.de>
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef LINUX_IIO_HW_CONSUMER_H
+#define LINUX_IIO_HW_CONSUMER_H
+
+struct iio_hw_consumer;
+
+struct iio_hw_consumer *iio_hw_consumer_alloc(struct device *dev);
+void iio_hw_consumer_free(struct iio_hw_consumer *hwc);
+int iio_hw_consumer_enable(struct iio_hw_consumer *hwc);
+void iio_hw_consumer_disable(struct iio_hw_consumer *hwc);
+
+#endif
-- 
2.7.4

[PATCH v5 02/13] docs: driver-api: add iio hw consumer section

[Arnaud Pouliquen]

This adds a section about the Hardware consumer
API of the IIO subsystem to the driver API
documentation.

Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@st.com>
---
V4->V5: Minor formating fixes.

 Documentation/driver-api/iio/hw-consumer.rst | 51 ++++++++++++++++++++++++++++
 Documentation/driver-api/iio/index.rst       |  1 +
 2 files changed, 52 insertions(+)
 create mode 100644 Documentation/driver-api/iio/hw-consumer.rst

diff --git a/Documentation/driver-api/iio/hw-consumer.rst b/Documentation/driver-api/iio/hw-consumer.rst
new file mode 100644
index 0000000..8facce6
--- /dev/null
+++ b/Documentation/driver-api/iio/hw-consumer.rst
@@ -0,0 +1,51 @@
+===========
+HW consumer
+===========
+An IIO device can be directly connected to another device in hardware. in this
+case the buffers between IIO provider and IIO consumer are handled by hardware.
+The Industrial I/O HW consumer offers a way to bond these IIO devices without
+software buffer for data. The implementation can be found under
+:file:`drivers/iio/buffer/hw-consumer.c`
+
+
+* struct :c:type:`iio_hw_consumer` — Hardware consumer structure
+* :c:func:`iio_hw_consumer_alloc` — Allocate IIO hardware consumer
+* :c:func:`iio_hw_consumer_free` — Free IIO hardware consumer
+* :c:func:`iio_hw_consumer_enable` — Enable IIO hardware consumer
+* :c:func:`iio_hw_consumer_disable` — Disable IIO hardware consumer
+
+
+HW consumer setup
+=================
+
+As standard IIO device the implementation is based on IIO provider/consumer.
+A typical IIO HW consumer setup looks like this::
+
+	static struct iio_hw_consumer *hwc;
+
+	static const struct iio_info adc_info = {
+		.read_raw = adc_read_raw,
+	};
+
+	static int adc_read_raw(struct iio_dev *indio_dev,
+				struct iio_chan_spec const *chan, int *val,
+				int *val2, long mask)
+	{
+		ret = iio_hw_consumer_enable(hwc);
+
+		/* Acquire data */
+
+		ret = iio_hw_consumer_disable(hwc);
+	}
+
+	static int adc_probe(struct platform_device *pdev)
+	{
+		hwc = devm_iio_hw_consumer_alloc(&iio->dev);
+	}
+
+More details
+============
+.. kernel-doc:: include/linux/iio/hw-consumer.h
+.. kernel-doc:: drivers/iio/buffer/industrialio-hw-consumer.c
+   :export:
+
diff --git a/Documentation/driver-api/iio/index.rst b/Documentation/driver-api/iio/index.rst
index e5c3922..7fba341 100644
--- a/Documentation/driver-api/iio/index.rst
+++ b/Documentation/driver-api/iio/index.rst
@@ -15,3 +15,4 @@ Contents:
    buffers
    triggers
    triggered-buffers
+   hw-consumer
-- 
2.7.4

_______________________________________________
Alsa-devel mailing list
Alsa-devel@alsa-project.org
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel

Applied "docs: driver-api: add iio hw consumer section" to the asoc tree

[Mark Brown]

[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain, Size: 4092 bytes --]

The patch

   docs: driver-api: add iio hw consumer section

has been applied to the asoc tree at

   https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git 

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.  

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark

>From 5b178943d64b85d78350ea9c86344c376d7bfe74 Mon Sep 17 00:00:00 2001
From: Arnaud Pouliquen <arnaud.pouliquen-qxv4g6HH51o@public.gmane.org>
Date: Wed, 10 Jan 2018 11:13:04 +0100
Subject: [PATCH] docs: driver-api: add iio hw consumer section

This adds a section about the Hardware consumer
API of the IIO subsystem to the driver API
documentation.

Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen-qxv4g6HH51o@public.gmane.org>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron-hv44wF8Li93QT0dZR+AlfA@public.gmane.org>
Signed-off-by: Mark Brown <broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
---
 Documentation/driver-api/iio/hw-consumer.rst | 51 ++++++++++++++++++++++++++++
 Documentation/driver-api/iio/index.rst       |  1 +
 2 files changed, 52 insertions(+)
 create mode 100644 Documentation/driver-api/iio/hw-consumer.rst

diff --git a/Documentation/driver-api/iio/hw-consumer.rst b/Documentation/driver-api/iio/hw-consumer.rst
new file mode 100644
index 000000000000..8facce6a6733
--- /dev/null
+++ b/Documentation/driver-api/iio/hw-consumer.rst
@@ -0,0 +1,51 @@
+===========
+HW consumer
+===========
+An IIO device can be directly connected to another device in hardware. in this
+case the buffers between IIO provider and IIO consumer are handled by hardware.
+The Industrial I/O HW consumer offers a way to bond these IIO devices without
+software buffer for data. The implementation can be found under
+:file:`drivers/iio/buffer/hw-consumer.c`
+
+
+* struct :c:type:`iio_hw_consumer` — Hardware consumer structure
+* :c:func:`iio_hw_consumer_alloc` — Allocate IIO hardware consumer
+* :c:func:`iio_hw_consumer_free` — Free IIO hardware consumer
+* :c:func:`iio_hw_consumer_enable` — Enable IIO hardware consumer
+* :c:func:`iio_hw_consumer_disable` — Disable IIO hardware consumer
+
+
+HW consumer setup
+=================
+
+As standard IIO device the implementation is based on IIO provider/consumer.
+A typical IIO HW consumer setup looks like this::
+
+	static struct iio_hw_consumer *hwc;
+
+	static const struct iio_info adc_info = {
+		.read_raw = adc_read_raw,
+	};
+
+	static int adc_read_raw(struct iio_dev *indio_dev,
+				struct iio_chan_spec const *chan, int *val,
+				int *val2, long mask)
+	{
+		ret = iio_hw_consumer_enable(hwc);
+
+		/* Acquire data */
+
+		ret = iio_hw_consumer_disable(hwc);
+	}
+
+	static int adc_probe(struct platform_device *pdev)
+	{
+		hwc = devm_iio_hw_consumer_alloc(&iio->dev);
+	}
+
+More details
+============
+.. kernel-doc:: include/linux/iio/hw-consumer.h
+.. kernel-doc:: drivers/iio/buffer/industrialio-hw-consumer.c
+   :export:
+
diff --git a/Documentation/driver-api/iio/index.rst b/Documentation/driver-api/iio/index.rst
index e5c3922d1b6f..7fba341bd8b2 100644
--- a/Documentation/driver-api/iio/index.rst
+++ b/Documentation/driver-api/iio/index.rst
@@ -15,3 +15,4 @@ Contents:
    buffers
    triggers
    triggered-buffers
+   hw-consumer
-- 
2.15.1

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v5 03/13] IIO: hw_consumer: add devm_iio_hw_consumer_alloc

[Arnaud Pouliquen]

Add devm_iio_hw_consumer_alloc function that calls iio_hw_consumer_free
when the device is unbound from the bus.

Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@st.com>
---
V4->V5 No delta.

 drivers/iio/buffer/industrialio-hw-consumer.c | 66 +++++++++++++++++++++++++++
 include/linux/iio/hw-consumer.h               |  2 +
 2 files changed, 68 insertions(+)

diff --git a/drivers/iio/buffer/industrialio-hw-consumer.c b/drivers/iio/buffer/industrialio-hw-consumer.c
index 0253be1..e980a79 100644
--- a/drivers/iio/buffer/industrialio-hw-consumer.c
+++ b/drivers/iio/buffer/industrialio-hw-consumer.c
@@ -138,6 +138,72 @@ void iio_hw_consumer_free(struct iio_hw_consumer *hwc)
 }
 EXPORT_SYMBOL_GPL(iio_hw_consumer_free);
 
+static void devm_iio_hw_consumer_release(struct device *dev, void *res)
+{
+	iio_hw_consumer_free(*(struct iio_hw_consumer **)res);
+}
+
+static int devm_iio_hw_consumer_match(struct device *dev, void *res, void *data)
+{
+	struct iio_hw_consumer **r = res;
+
+	if (!r || !*r) {
+		WARN_ON(!r || !*r);
+		return 0;
+	}
+	return *r == data;
+}
+
+/**
+ * devm_iio_hw_consumer_alloc - Resource-managed iio_hw_consumer_alloc()
+ * @dev: Pointer to consumer device.
+ *
+ * Managed iio_hw_consumer_alloc. iio_hw_consumer allocated with this function
+ * is automatically freed on driver detach.
+ *
+ * If an iio_hw_consumer allocated with this function needs to be freed
+ * separately, devm_iio_hw_consumer_free() must be used.
+ *
+ * returns pointer to allocated iio_hw_consumer on success, NULL on failure.
+ */
+struct iio_hw_consumer *devm_iio_hw_consumer_alloc(struct device *dev)
+{
+	struct iio_hw_consumer **ptr, *iio_hwc;
+
+	ptr = devres_alloc(devm_iio_hw_consumer_release, sizeof(*ptr),
+			   GFP_KERNEL);
+	if (!ptr)
+		return NULL;
+
+	iio_hwc = iio_hw_consumer_alloc(dev);
+	if (IS_ERR(iio_hwc)) {
+		devres_free(ptr);
+	} else {
+		*ptr = iio_hwc;
+		devres_add(dev, ptr);
+	}
+
+	return iio_hwc;
+}
+EXPORT_SYMBOL_GPL(devm_iio_hw_consumer_alloc);
+
+/**
+ * devm_iio_hw_consumer_free - Resource-managed iio_hw_consumer_free()
+ * @dev: Pointer to consumer device.
+ * @hwc: iio_hw_consumer to free.
+ *
+ * Free iio_hw_consumer allocated with devm_iio_hw_consumer_alloc().
+ */
+void devm_iio_hw_consumer_free(struct device *dev, struct iio_hw_consumer *hwc)
+{
+	int rc;
+
+	rc = devres_release(dev, devm_iio_hw_consumer_release,
+			    devm_iio_hw_consumer_match, hwc);
+	WARN_ON(rc);
+}
+EXPORT_SYMBOL_GPL(devm_iio_hw_consumer_free);
+
 /**
  * iio_hw_consumer_enable() - Enable IIO hardware consumer
  * @hwc: iio_hw_consumer to enable.
diff --git a/include/linux/iio/hw-consumer.h b/include/linux/iio/hw-consumer.h
index f16791b..90ecfce 100644
--- a/include/linux/iio/hw-consumer.h
+++ b/include/linux/iio/hw-consumer.h
@@ -14,6 +14,8 @@ struct iio_hw_consumer;
 
 struct iio_hw_consumer *iio_hw_consumer_alloc(struct device *dev);
 void iio_hw_consumer_free(struct iio_hw_consumer *hwc);
+struct iio_hw_consumer *devm_iio_hw_consumer_alloc(struct device *dev);
+void devm_iio_hw_consumer_free(struct device *dev, struct iio_hw_consumer *hwc);
 int iio_hw_consumer_enable(struct iio_hw_consumer *hwc);
 void iio_hw_consumer_disable(struct iio_hw_consumer *hwc);
 
-- 
2.7.4

Applied "IIO: hw_consumer: add devm_iio_hw_consumer_alloc" to the asoc tree

[Mark Brown]

The patch

   IIO: hw_consumer: add devm_iio_hw_consumer_alloc

has been applied to the asoc tree at

   https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git 

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.  

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark

>From b688c18d30060e8a840d8af72790339c72acdac4 Mon Sep 17 00:00:00 2001
From: Arnaud Pouliquen <arnaud.pouliquen-qxv4g6HH51o@public.gmane.org>
Date: Wed, 10 Jan 2018 11:13:05 +0100
Subject: [PATCH] IIO: hw_consumer: add devm_iio_hw_consumer_alloc

Add devm_iio_hw_consumer_alloc function that calls iio_hw_consumer_free
when the device is unbound from the bus.

Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen-qxv4g6HH51o@public.gmane.org>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron-hv44wF8Li93QT0dZR+AlfA@public.gmane.org>
Signed-off-by: Mark Brown <broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
---
 drivers/iio/buffer/industrialio-hw-consumer.c | 66 +++++++++++++++++++++++++++
 include/linux/iio/hw-consumer.h               |  2 +
 2 files changed, 68 insertions(+)

diff --git a/drivers/iio/buffer/industrialio-hw-consumer.c b/drivers/iio/buffer/industrialio-hw-consumer.c
index 993ecdcdab64..95165697d8ae 100644
--- a/drivers/iio/buffer/industrialio-hw-consumer.c
+++ b/drivers/iio/buffer/industrialio-hw-consumer.c
@@ -137,6 +137,72 @@ void iio_hw_consumer_free(struct iio_hw_consumer *hwc)
 }
 EXPORT_SYMBOL_GPL(iio_hw_consumer_free);
 
+static void devm_iio_hw_consumer_release(struct device *dev, void *res)
+{
+	iio_hw_consumer_free(*(struct iio_hw_consumer **)res);
+}
+
+static int devm_iio_hw_consumer_match(struct device *dev, void *res, void *data)
+{
+	struct iio_hw_consumer **r = res;
+
+	if (!r || !*r) {
+		WARN_ON(!r || !*r);
+		return 0;
+	}
+	return *r == data;
+}
+
+/**
+ * devm_iio_hw_consumer_alloc - Resource-managed iio_hw_consumer_alloc()
+ * @dev: Pointer to consumer device.
+ *
+ * Managed iio_hw_consumer_alloc. iio_hw_consumer allocated with this function
+ * is automatically freed on driver detach.
+ *
+ * If an iio_hw_consumer allocated with this function needs to be freed
+ * separately, devm_iio_hw_consumer_free() must be used.
+ *
+ * returns pointer to allocated iio_hw_consumer on success, NULL on failure.
+ */
+struct iio_hw_consumer *devm_iio_hw_consumer_alloc(struct device *dev)
+{
+	struct iio_hw_consumer **ptr, *iio_hwc;
+
+	ptr = devres_alloc(devm_iio_hw_consumer_release, sizeof(*ptr),
+			   GFP_KERNEL);
+	if (!ptr)
+		return NULL;
+
+	iio_hwc = iio_hw_consumer_alloc(dev);
+	if (IS_ERR(iio_hwc)) {
+		devres_free(ptr);
+	} else {
+		*ptr = iio_hwc;
+		devres_add(dev, ptr);
+	}
+
+	return iio_hwc;
+}
+EXPORT_SYMBOL_GPL(devm_iio_hw_consumer_alloc);
+
+/**
+ * devm_iio_hw_consumer_free - Resource-managed iio_hw_consumer_free()
+ * @dev: Pointer to consumer device.
+ * @hwc: iio_hw_consumer to free.
+ *
+ * Free iio_hw_consumer allocated with devm_iio_hw_consumer_alloc().
+ */
+void devm_iio_hw_consumer_free(struct device *dev, struct iio_hw_consumer *hwc)
+{
+	int rc;
+
+	rc = devres_release(dev, devm_iio_hw_consumer_release,
+			    devm_iio_hw_consumer_match, hwc);
+	WARN_ON(rc);
+}
+EXPORT_SYMBOL_GPL(devm_iio_hw_consumer_free);
+
 /**
  * iio_hw_consumer_enable() - Enable IIO hardware consumer
  * @hwc: iio_hw_consumer to enable.
diff --git a/include/linux/iio/hw-consumer.h b/include/linux/iio/hw-consumer.h
index db8c00b9c7a5..44d48bb1d39f 100644
--- a/include/linux/iio/hw-consumer.h
+++ b/include/linux/iio/hw-consumer.h
@@ -13,6 +13,8 @@ struct iio_hw_consumer;
 
 struct iio_hw_consumer *iio_hw_consumer_alloc(struct device *dev);
 void iio_hw_consumer_free(struct iio_hw_consumer *hwc);
+struct iio_hw_consumer *devm_iio_hw_consumer_alloc(struct device *dev);
+void devm_iio_hw_consumer_free(struct device *dev, struct iio_hw_consumer *hwc);
 int iio_hw_consumer_enable(struct iio_hw_consumer *hwc);
 void iio_hw_consumer_disable(struct iio_hw_consumer *hwc);
 
-- 
2.15.1

[PATCH v5 05/13] IIO: Add DT bindings for sigma delta adc modulator

[Arnaud Pouliquen]

Add documentation of device tree bindings to support
sigma delta modulator in IIO framework.

Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@st.com>
Acked-by: Rob Herring <robh@kernel.org>
---
 .../devicetree/bindings/iio/adc/sigma-delta-modulator.txt   | 13 +++++++++++++
 1 file changed, 13 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/iio/adc/sigma-delta-modulator.txt

diff --git a/Documentation/devicetree/bindings/iio/adc/sigma-delta-modulator.txt b/Documentation/devicetree/bindings/iio/adc/sigma-delta-modulator.txt
new file mode 100644
index 0000000..e9ebb8a
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/sigma-delta-modulator.txt
@@ -0,0 +1,13 @@
+Device-Tree bindings for sigma delta modulator
+
+Required properties:
+- compatible: should be "ads1201", "sd-modulator". "sd-modulator" can be use
+	as a generic SD modulator if modulator not specified in compatible list.
+- #io-channel-cells = <1>: See the IIO bindings section "IIO consumers".
+
+Example node:
+
+	ads1202: adc@0 {
+		compatible = "sd-modulator";
+		#io-channel-cells = <1>;
+	};
-- 
2.7.4

[PATCH v5 06/13] IIO: ADC: add sigma delta modulator support

[Arnaud Pouliquen]

Add generic driver to support sigma delta modulators.
Typically, this device is hardware connected to
an IIO device in charge of the conversion. Devices are
bonded through the hardware consumer API.

Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@st.com>
---
V4-> v5
  - Add mare descritpion in commit message.
  - Suppress scan_index specification in iio_chan_spec .
 
 drivers/iio/adc/Kconfig            | 12 ++++++
 drivers/iio/adc/Makefile           |  1 +
 drivers/iio/adc/sd_adc_modulator.c | 81 ++++++++++++++++++++++++++++++++++++++
 3 files changed, 94 insertions(+)
 create mode 100644 drivers/iio/adc/sd_adc_modulator.c

diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig
index 5762565..c5db62f 100644
--- a/drivers/iio/adc/Kconfig
+++ b/drivers/iio/adc/Kconfig
@@ -626,6 +626,18 @@ config SPEAR_ADC
 	  To compile this driver as a module, choose M here: the
 	  module will be called spear_adc.
 
+config SD_ADC_MODULATOR
+	tristate "Generic sigma delta modulator"
+	depends on OF
+	select IIO_BUFFER
+	select IIO_TRIGGERED_BUFFER
+	help
+	  Select this option to enables sigma delta modulator. This driver can
+	  support generic sigma delta modulators.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called sd_adc_modulator.
+
 config STM32_ADC_CORE
 	tristate "STMicroelectronics STM32 adc core"
 	depends on ARCH_STM32 || COMPILE_TEST
diff --git a/drivers/iio/adc/Makefile b/drivers/iio/adc/Makefile
index 9874e05..d800325 100644
--- a/drivers/iio/adc/Makefile
+++ b/drivers/iio/adc/Makefile
@@ -81,3 +81,4 @@ obj-$(CONFIG_VF610_ADC) += vf610_adc.o
 obj-$(CONFIG_VIPERBOARD_ADC) += viperboard_adc.o
 xilinx-xadc-y := xilinx-xadc-core.o xilinx-xadc-events.o
 obj-$(CONFIG_XILINX_XADC) += xilinx-xadc.o
+obj-$(CONFIG_SD_ADC_MODULATOR) += sd_adc_modulator.o
diff --git a/drivers/iio/adc/sd_adc_modulator.c b/drivers/iio/adc/sd_adc_modulator.c
new file mode 100644
index 0000000..08bd7b6
--- /dev/null
+++ b/drivers/iio/adc/sd_adc_modulator.c
@@ -0,0 +1,81 @@
+/*
+ * Generic sigma delta modulator driver
+ *
+ * Copyright (C) 2017, STMicroelectronics - All Rights Reserved
+ * Author: Arnaud Pouliquen <arnaud.pouliquen@st.com>.
+ *
+ * License type: GPLv2
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE.
+ * See the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/iio/iio.h>
+#include <linux/iio/triggered_buffer.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+
+static const struct iio_info iio_sd_mod_iio_info;
+
+static const struct iio_chan_spec iio_sd_mod_ch = {
+	.type = IIO_VOLTAGE,
+	.indexed = 1,
+	.scan_type = {
+		.sign = 'u',
+		.realbits = 1,
+		.shift = 0,
+	},
+};
+
+static int iio_sd_mod_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct iio_dev *iio;
+
+	iio = devm_iio_device_alloc(dev, 0);
+	if (!iio)
+		return -ENOMEM;
+
+	iio->dev.parent = dev;
+	iio->dev.of_node = dev->of_node;
+	iio->name = dev_name(dev);
+	iio->info = &iio_sd_mod_iio_info;
+	iio->modes = INDIO_BUFFER_HARDWARE;
+
+	iio->num_channels = 1;
+	iio->channels = &iio_sd_mod_ch;
+
+	platform_set_drvdata(pdev, iio);
+
+	return devm_iio_device_register(&pdev->dev, iio);
+}
+
+static const struct of_device_id sd_adc_of_match[] = {
+	{ .compatible = "sd-modulator" },
+	{ .compatible = "ads1201" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, sd_adc_of_match);
+
+static struct platform_driver iio_sd_mod_adc = {
+	.driver = {
+		.name = "iio_sd_adc_mod",
+		.of_match_table = of_match_ptr(sd_adc_of_match),
+	},
+	.probe = iio_sd_mod_probe,
+};
+
+module_platform_driver(iio_sd_mod_adc);
+
+MODULE_DESCRIPTION("Basic sigma delta modulator");
+MODULE_AUTHOR("Arnaud Pouliquen <arnaud.pouliquen@st.com>");
+MODULE_LICENSE("GPL v2");
-- 
2.7.4

[PATCH v5 04/13] IIO: inkern: API for manipulating channel attributes

[Arnaud Pouliquen]

Extend the inkern API with functions for reading and writing
attribute of iio channels.

Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen-qxv4g6HH51o@public.gmane.org>
---
 drivers/iio/inkern.c         | 18 +++++++++++++-----
 include/linux/iio/consumer.h | 26 ++++++++++++++++++++++++++
 2 files changed, 39 insertions(+), 5 deletions(-)

diff --git a/drivers/iio/inkern.c b/drivers/iio/inkern.c
index 069defc..f2e7824 100644
--- a/drivers/iio/inkern.c
+++ b/drivers/iio/inkern.c
@@ -664,9 +664,8 @@ int iio_convert_raw_to_processed(struct iio_channel *chan, int raw,
 }
 EXPORT_SYMBOL_GPL(iio_convert_raw_to_processed);
 
-static int iio_read_channel_attribute(struct iio_channel *chan,
-				      int *val, int *val2,
-				      enum iio_chan_info_enum attribute)
+int iio_read_channel_attribute(struct iio_channel *chan, int *val, int *val2,
+			       enum iio_chan_info_enum attribute)
 {
 	int ret;
 
@@ -682,6 +681,8 @@ static int iio_read_channel_attribute(struct iio_channel *chan,
 
 	return ret;
 }
+EXPORT_SYMBOL_GPL(iio_read_channel_attribute);
+
 
 int iio_read_channel_offset(struct iio_channel *chan, int *val, int *val2)
 {
@@ -850,7 +851,8 @@ static int iio_channel_write(struct iio_channel *chan, int val, int val2,
 						chan->channel, val, val2, info);
 }
 
-int iio_write_channel_raw(struct iio_channel *chan, int val)
+int iio_write_channel_attribute(struct iio_channel *chan, int val, int val2,
+				enum iio_chan_info_enum attribute)
 {
 	int ret;
 
@@ -860,12 +862,18 @@ int iio_write_channel_raw(struct iio_channel *chan, int val)
 		goto err_unlock;
 	}
 
-	ret = iio_channel_write(chan, val, 0, IIO_CHAN_INFO_RAW);
+	ret = iio_channel_write(chan, val, val2, attribute);
 err_unlock:
 	mutex_unlock(&chan->indio_dev->info_exist_lock);
 
 	return ret;
 }
+EXPORT_SYMBOL_GPL(iio_write_channel_attribute);
+
+int iio_write_channel_raw(struct iio_channel *chan, int val)
+{
+	return iio_write_channel_attribute(chan, val, 0, IIO_CHAN_INFO_RAW);
+}
 EXPORT_SYMBOL_GPL(iio_write_channel_raw);
 
 unsigned int iio_get_channel_ext_info_count(struct iio_channel *chan)
diff --git a/include/linux/iio/consumer.h b/include/linux/iio/consumer.h
index 5e347a9..2017f35 100644
--- a/include/linux/iio/consumer.h
+++ b/include/linux/iio/consumer.h
@@ -216,6 +216,32 @@ int iio_read_channel_average_raw(struct iio_channel *chan, int *val);
 int iio_read_channel_processed(struct iio_channel *chan, int *val);
 
 /**
+ * iio_write_channel_attribute() - Write values to the device attribute.
+ * @chan:	The channel being queried.
+ * @val:	Value being written.
+ * @val2:	Value being written.val2 use depends on attribute type.
+ * @attribute:	info attribute to be read.
+ *
+ * Returns an error code or 0.
+ */
+int iio_write_channel_attribute(struct iio_channel *chan, int val,
+				int val2, enum iio_chan_info_enum attribute);
+
+/**
+ * iio_read_channel_attribute() - Read values from the device attribute.
+ * @chan:	The channel being queried.
+ * @val:	Value being written.
+ * @val2:	Value being written.Val2 use depends on attribute type.
+ * @attribute:	info attribute to be written.
+ *
+ * Returns an error code if failed. Else returns a description of what is in val
+ * and val2, such as IIO_VAL_INT_PLUS_MICRO telling us we have a value of val
+ * + val2/1e6
+ */
+int iio_read_channel_attribute(struct iio_channel *chan, int *val,
+			       int *val2, enum iio_chan_info_enum attribute);
+
+/**
  * iio_write_channel_raw() - write to a given channel
  * @chan:		The channel being queried.
  * @val:		Value being written.
-- 
2.7.4

Re: [PATCH v5 04/13] IIO: inkern: API for manipulating channel attributes

[Phil Reid]

On 28/11/2017 23:05, Arnaud Pouliquen wrote:
> Extend the inkern API with functions for reading and writing
> attribute of iio channels.

I submitted a similar patch a while ago and never followed up with a v2.
This will address the same thing, nice.
> 
> Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen-qxv4g6HH51o@public.gmane.org>
> ---
>   drivers/iio/inkern.c         | 18 +++++++++++++-----
>   include/linux/iio/consumer.h | 26 ++++++++++++++++++++++++++
>   2 files changed, 39 insertions(+), 5 deletions(-)
> 
> diff --git a/drivers/iio/inkern.c b/drivers/iio/inkern.c
> index 069defc..f2e7824 100644
> --- a/drivers/iio/inkern.c
> +++ b/drivers/iio/inkern.c
> @@ -664,9 +664,8 @@ int iio_convert_raw_to_processed(struct iio_channel *chan, int raw,
>   }
>   EXPORT_SYMBOL_GPL(iio_convert_raw_to_processed);
>   
> -static int iio_read_channel_attribute(struct iio_channel *chan,
> -				      int *val, int *val2,
> -				      enum iio_chan_info_enum attribute)
> +int iio_read_channel_attribute(struct iio_channel *chan, int *val, int *val2,
> +			       enum iio_chan_info_enum attribute)
>   {
>   	int ret;
>   
> @@ -682,6 +681,8 @@ static int iio_read_channel_attribute(struct iio_channel *chan,
>   
>   	return ret;
>   }
> +EXPORT_SYMBOL_GPL(iio_read_channel_attribute);
> +
>   
>   int iio_read_channel_offset(struct iio_channel *chan, int *val, int *val2)
>   {
> @@ -850,7 +851,8 @@ static int iio_channel_write(struct iio_channel *chan, int val, int val2,
>   						chan->channel, val, val2, info);
>   }
>   
> -int iio_write_channel_raw(struct iio_channel *chan, int val)
> +int iio_write_channel_attribute(struct iio_channel *chan, int val, int val2,
> +				enum iio_chan_info_enum attribute)
>   {
>   	int ret;
>   
> @@ -860,12 +862,18 @@ int iio_write_channel_raw(struct iio_channel *chan, int val)
>   		goto err_unlock;
>   	}
>   
> -	ret = iio_channel_write(chan, val, 0, IIO_CHAN_INFO_RAW);
> +	ret = iio_channel_write(chan, val, val2, attribute);
>   err_unlock:
>   	mutex_unlock(&chan->indio_dev->info_exist_lock);
>   
>   	return ret;
>   }
> +EXPORT_SYMBOL_GPL(iio_write_channel_attribute);
> +
> +int iio_write_channel_raw(struct iio_channel *chan, int val)
> +{
> +	return iio_write_channel_attribute(chan, val, 0, IIO_CHAN_INFO_RAW);
> +}
>   EXPORT_SYMBOL_GPL(iio_write_channel_raw);
>   
>   unsigned int iio_get_channel_ext_info_count(struct iio_channel *chan)
> diff --git a/include/linux/iio/consumer.h b/include/linux/iio/consumer.h
> index 5e347a9..2017f35 100644
> --- a/include/linux/iio/consumer.h
> +++ b/include/linux/iio/consumer.h
> @@ -216,6 +216,32 @@ int iio_read_channel_average_raw(struct iio_channel *chan, int *val);
>   int iio_read_channel_processed(struct iio_channel *chan, int *val);
>   
>   /**
> + * iio_write_channel_attribute() - Write values to the device attribute.
> + * @chan:	The channel being queried.
> + * @val:	Value being written.
> + * @val2:	Value being written.val2 use depends on attribute type.
> + * @attribute:	info attribute to be read.
i think s/read/written/

> + *
> + * Returns an error code or 0.
> + */
> +int iio_write_channel_attribute(struct iio_channel *chan, int val,
> +				int val2, enum iio_chan_info_enum attribute);
> +
> +/**
> + * iio_read_channel_attribute() - Read values from the device attribute.
> + * @chan:	The channel being queried.
> + * @val:	Value being written.
> + * @val2:	Value being written.Val2 use depends on attribute type.
> + * @attribute:	info attribute to be written.
and also s/written/read/

> + *
> + * Returns an error code if failed. Else returns a description of what is in val
> + * and val2, such as IIO_VAL_INT_PLUS_MICRO telling us we have a value of val
> + * + val2/1e6
> + */
> +int iio_read_channel_attribute(struct iio_channel *chan, int *val,
> +			       int *val2, enum iio_chan_info_enum attribute);
> +
> +/**
>    * iio_write_channel_raw() - write to a given channel
>    * @chan:		The channel being queried.
>    * @val:		Value being written.
> 


-- 
Regards
Phil Reid

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [alsa-devel] [PATCH v5 04/13] IIO: inkern: API for manipulating channel attributes

[kbuild test robot]

[-- Attachment #1: Type: text/plain, Size: 2102 bytes --]

Hi Arnaud,

Thank you for the patch! Perhaps something to improve:

[auto build test WARNING on iio/togreg]
[also build test WARNING on v4.15-rc1 next-20171201]
[if your patch is applied to the wrong git tree, please drop us a note to help improve the system]

url:    https://github.com/0day-ci/linux/commits/Arnaud-Pouliquen/Add-STM32-DFSDM-support/20171201-215409
base:   https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio.git togreg
config: xtensa-allyesconfig (attached as .config)
compiler: xtensa-linux-gcc (GCC) 4.9.0
reproduce:
        wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
        chmod +x ~/bin/make.cross
        # save the attached .config to linux build tree
        make.cross ARCH=xtensa 

All warnings (new ones prefixed by >>):

   In file included from drivers/iio//adc/envelope-detector.c:38:0:
>> include/linux/iio/consumer.h:228:20: warning: 'enum iio_chan_info_enum' declared inside parameter list
        int val2, enum iio_chan_info_enum attribute);
                       ^
>> include/linux/iio/consumer.h:228:20: warning: its scope is only this definition or declaration, which is probably not what you want
   include/linux/iio/consumer.h:242:27: warning: 'enum iio_chan_info_enum' declared inside parameter list
              int *val2, enum iio_chan_info_enum attribute);
                              ^

vim +228 include/linux/iio/consumer.h

   217	
   218	/**
   219	 * iio_write_channel_attribute() - Write values to the device attribute.
   220	 * @chan:	The channel being queried.
   221	 * @val:	Value being written.
   222	 * @val2:	Value being written.val2 use depends on attribute type.
   223	 * @attribute:	info attribute to be read.
   224	 *
   225	 * Returns an error code or 0.
   226	 */
   227	int iio_write_channel_attribute(struct iio_channel *chan, int val,
 > 228					int val2, enum iio_chan_info_enum attribute);
   229	

---
0-DAY kernel test infrastructure                Open Source Technology Center
https://lists.01.org/pipermail/kbuild-all                   Intel Corporation

[-- Attachment #2: .config.gz --]
[-- Type: application/gzip, Size: 51640 bytes --]

Re: [alsa-devel] [PATCH v5 04/13] IIO: inkern: API for manipulating channel attributes

[kbuild test robot]

[-- Attachment #1: Type: text/plain, Size: 12055 bytes --]

Hi Arnaud,

Thank you for the patch! Perhaps something to improve:

[auto build test WARNING on iio/togreg]
[also build test WARNING on v4.15-rc1 next-20171201]
[if your patch is applied to the wrong git tree, please drop us a note to help improve the system]

url:    https://github.com/0day-ci/linux/commits/Arnaud-Pouliquen/Add-STM32-DFSDM-support/20171201-215409
base:   https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio.git togreg
config: x86_64-randconfig-x012-201748 (attached as .config)
compiler: gcc-7 (Debian 7.2.0-12) 7.2.1 20171025
reproduce:
        # save the attached .config to linux build tree
        make ARCH=x86_64 

All warnings (new ones prefixed by >>):

   In file included from drivers/iio/adc/envelope-detector.c:38:0:
>> include/linux/iio/consumer.h:228:20: warning: 'enum iio_chan_info_enum' declared inside parameter list will not be visible outside of this definition or declaration
        int val2, enum iio_chan_info_enum attribute);
                       ^~~~~~~~~~~~~~~~~~
   include/linux/iio/consumer.h:242:27: warning: 'enum iio_chan_info_enum' declared inside parameter list will not be visible outside of this definition or declaration
              int *val2, enum iio_chan_info_enum attribute);
                              ^~~~~~~~~~~~~~~~~~
   Cyclomatic Complexity 5 include/linux/compiler.h:__write_once_size
   Cyclomatic Complexity 1 include/linux/kernel.h:kstrtoul
   Cyclomatic Complexity 1 include/linux/list.h:INIT_LIST_HEAD
   Cyclomatic Complexity 1 include/linux/err.h:PTR_ERR
   Cyclomatic Complexity 1 include/linux/err.h:IS_ERR
   Cyclomatic Complexity 1 include/linux/spinlock.h:spinlock_check
   Cyclomatic Complexity 1 include/linux/spinlock.h:spin_lock
   Cyclomatic Complexity 1 include/linux/spinlock.h:spin_lock_irq
   Cyclomatic Complexity 1 include/linux/spinlock.h:spin_unlock
   Cyclomatic Complexity 1 include/linux/spinlock.h:spin_unlock_irq
   Cyclomatic Complexity 1 include/linux/completion.h:__init_completion
   Cyclomatic Complexity 1 include/linux/jiffies.h:_msecs_to_jiffies
   Cyclomatic Complexity 3 include/linux/jiffies.h:msecs_to_jiffies
   Cyclomatic Complexity 1 include/linux/workqueue.h:queue_delayed_work
   Cyclomatic Complexity 1 include/linux/workqueue.h:schedule_delayed_work
   Cyclomatic Complexity 1 include/linux/kobject.h:kobject_name
   Cyclomatic Complexity 2 include/linux/device.h:dev_name
   Cyclomatic Complexity 1 include/linux/device.h:dev_set_drvdata
   Cyclomatic Complexity 1 include/linux/iio/iio.h:iio_priv
   Cyclomatic Complexity 1 include/linux/irq.h:irqd_get_trigger_type
   Cyclomatic Complexity 2 include/linux/irq.h:irq_get_trigger_type
   Cyclomatic Complexity 1 include/linux/interrupt.h:devm_request_irq
   Cyclomatic Complexity 1 include/linux/platform_device.h:platform_set_drvdata
   Cyclomatic Complexity 1 drivers/iio/adc/envelope-detector.c:envelope_detector_driver_init
   Cyclomatic Complexity 15 drivers/iio/adc/envelope-detector.c:envelope_detector_probe
   Cyclomatic Complexity 1 drivers/iio/adc/envelope-detector.c:envelope_detector_comp_isr
   Cyclomatic Complexity 3 drivers/iio/adc/envelope-detector.c:envelope_store_comp_interval
   Cyclomatic Complexity 1 drivers/iio/adc/envelope-detector.c:envelope_show_comp_interval
   Cyclomatic Complexity 1 drivers/iio/adc/envelope-detector.c:envelope_show_invert
   Cyclomatic Complexity 6 drivers/iio/adc/envelope-detector.c:envelope_store_invert
   Cyclomatic Complexity 3 drivers/iio/adc/envelope-detector.c:envelope_detector_comp_latch
   Cyclomatic Complexity 5 drivers/iio/adc/envelope-detector.c:envelope_detector_setup_compare
   Cyclomatic Complexity 5 drivers/iio/adc/envelope-detector.c:envelope_detector_read_raw
   Cyclomatic Complexity 3 drivers/iio/adc/envelope-detector.c:envelope_detector_timeout
   Cyclomatic Complexity 1 drivers/iio/adc/envelope-detector.c:envelope_detector_driver_exit
--
   In file included from drivers/iio/multiplexer/iio-mux.c:14:0:
>> include/linux/iio/consumer.h:228:20: warning: 'enum iio_chan_info_enum' declared inside parameter list will not be visible outside of this definition or declaration
        int val2, enum iio_chan_info_enum attribute);
                       ^~~~~~~~~~~~~~~~~~
   include/linux/iio/consumer.h:242:27: warning: 'enum iio_chan_info_enum' declared inside parameter list will not be visible outside of this definition or declaration
              int *val2, enum iio_chan_info_enum attribute);
                              ^~~~~~~~~~~~~~~~~~
   Cyclomatic Complexity 1 include/linux/err.h:PTR_ERR
   Cyclomatic Complexity 1 include/linux/err.h:IS_ERR
   Cyclomatic Complexity 1 include/linux/kobject.h:kobject_name
   Cyclomatic Complexity 1 include/linux/device.h:devm_kzalloc
   Cyclomatic Complexity 2 include/linux/device.h:dev_name
   Cyclomatic Complexity 1 include/linux/device.h:dev_set_drvdata
   Cyclomatic Complexity 1 include/linux/iio/iio.h:iio_channel_has_info
   Cyclomatic Complexity 1 include/linux/iio/iio.h:iio_channel_has_available
   Cyclomatic Complexity 1 include/linux/iio/iio.h:iio_priv
   Cyclomatic Complexity 1 include/linux/platform_device.h:platform_set_drvdata
   Cyclomatic Complexity 1 drivers/iio/multiplexer/iio-mux.c:mux_driver_init
   Cyclomatic Complexity 7 drivers/iio/multiplexer/iio-mux.c:iio_mux_select
   Cyclomatic Complexity 1 drivers/iio/multiplexer/iio-mux.c:iio_mux_deselect
   Cyclomatic Complexity 5 drivers/iio/multiplexer/iio-mux.c:mux_write_ext_info
   Cyclomatic Complexity 2 drivers/iio/multiplexer/iio-mux.c:mux_read_ext_info
   Cyclomatic Complexity 3 drivers/iio/multiplexer/iio-mux.c:mux_write_raw
   Cyclomatic Complexity 3 drivers/iio/multiplexer/iio-mux.c:mux_read_avail
   Cyclomatic Complexity 4 drivers/iio/multiplexer/iio-mux.c:mux_read_raw
   Cyclomatic Complexity 16 drivers/iio/multiplexer/iio-mux.c:mux_configure_channel
   Cyclomatic Complexity 20 drivers/iio/multiplexer/iio-mux.c:mux_probe
   Cyclomatic Complexity 1 drivers/iio/multiplexer/iio-mux.c:mux_driver_exit
--
   In file included from drivers/iio//adc/envelope-detector.c:38:0:
>> include/linux/iio/consumer.h:228:20: warning: 'enum iio_chan_info_enum' declared inside parameter list will not be visible outside of this definition or declaration
        int val2, enum iio_chan_info_enum attribute);
                       ^~~~~~~~~~~~~~~~~~
   include/linux/iio/consumer.h:242:27: warning: 'enum iio_chan_info_enum' declared inside parameter list will not be visible outside of this definition or declaration
              int *val2, enum iio_chan_info_enum attribute);
                              ^~~~~~~~~~~~~~~~~~
   Cyclomatic Complexity 5 include/linux/compiler.h:__write_once_size
   Cyclomatic Complexity 1 include/linux/kernel.h:kstrtoul
   Cyclomatic Complexity 1 include/linux/list.h:INIT_LIST_HEAD
   Cyclomatic Complexity 1 include/linux/err.h:PTR_ERR
   Cyclomatic Complexity 1 include/linux/err.h:IS_ERR
   Cyclomatic Complexity 1 include/linux/spinlock.h:spinlock_check
   Cyclomatic Complexity 1 include/linux/spinlock.h:spin_lock
   Cyclomatic Complexity 1 include/linux/spinlock.h:spin_lock_irq
   Cyclomatic Complexity 1 include/linux/spinlock.h:spin_unlock
   Cyclomatic Complexity 1 include/linux/spinlock.h:spin_unlock_irq
   Cyclomatic Complexity 1 include/linux/completion.h:__init_completion
   Cyclomatic Complexity 1 include/linux/jiffies.h:_msecs_to_jiffies
   Cyclomatic Complexity 3 include/linux/jiffies.h:msecs_to_jiffies
   Cyclomatic Complexity 1 include/linux/workqueue.h:queue_delayed_work
   Cyclomatic Complexity 1 include/linux/workqueue.h:schedule_delayed_work
   Cyclomatic Complexity 1 include/linux/kobject.h:kobject_name
   Cyclomatic Complexity 2 include/linux/device.h:dev_name
   Cyclomatic Complexity 1 include/linux/device.h:dev_set_drvdata
   Cyclomatic Complexity 1 include/linux/iio/iio.h:iio_priv
   Cyclomatic Complexity 1 include/linux/irq.h:irqd_get_trigger_type
   Cyclomatic Complexity 2 include/linux/irq.h:irq_get_trigger_type
   Cyclomatic Complexity 1 include/linux/interrupt.h:devm_request_irq
   Cyclomatic Complexity 1 include/linux/platform_device.h:platform_set_drvdata
   Cyclomatic Complexity 1 drivers/iio//adc/envelope-detector.c:envelope_detector_driver_init
   Cyclomatic Complexity 15 drivers/iio//adc/envelope-detector.c:envelope_detector_probe
   Cyclomatic Complexity 1 drivers/iio//adc/envelope-detector.c:envelope_detector_comp_isr
   Cyclomatic Complexity 3 drivers/iio//adc/envelope-detector.c:envelope_store_comp_interval
   Cyclomatic Complexity 1 drivers/iio//adc/envelope-detector.c:envelope_show_comp_interval
   Cyclomatic Complexity 1 drivers/iio//adc/envelope-detector.c:envelope_show_invert
   Cyclomatic Complexity 6 drivers/iio//adc/envelope-detector.c:envelope_store_invert
   Cyclomatic Complexity 3 drivers/iio//adc/envelope-detector.c:envelope_detector_comp_latch
   Cyclomatic Complexity 5 drivers/iio//adc/envelope-detector.c:envelope_detector_setup_compare
   Cyclomatic Complexity 5 drivers/iio//adc/envelope-detector.c:envelope_detector_read_raw
   Cyclomatic Complexity 3 drivers/iio//adc/envelope-detector.c:envelope_detector_timeout
   Cyclomatic Complexity 1 drivers/iio//adc/envelope-detector.c:envelope_detector_driver_exit
--
   In file included from drivers/iio//multiplexer/iio-mux.c:14:0:
>> include/linux/iio/consumer.h:228:20: warning: 'enum iio_chan_info_enum' declared inside parameter list will not be visible outside of this definition or declaration
        int val2, enum iio_chan_info_enum attribute);
                       ^~~~~~~~~~~~~~~~~~
   include/linux/iio/consumer.h:242:27: warning: 'enum iio_chan_info_enum' declared inside parameter list will not be visible outside of this definition or declaration
              int *val2, enum iio_chan_info_enum attribute);
                              ^~~~~~~~~~~~~~~~~~
   Cyclomatic Complexity 1 include/linux/err.h:PTR_ERR
   Cyclomatic Complexity 1 include/linux/err.h:IS_ERR
   Cyclomatic Complexity 1 include/linux/kobject.h:kobject_name
   Cyclomatic Complexity 1 include/linux/device.h:devm_kzalloc
   Cyclomatic Complexity 2 include/linux/device.h:dev_name
   Cyclomatic Complexity 1 include/linux/device.h:dev_set_drvdata
   Cyclomatic Complexity 1 include/linux/iio/iio.h:iio_channel_has_info
   Cyclomatic Complexity 1 include/linux/iio/iio.h:iio_channel_has_available
   Cyclomatic Complexity 1 include/linux/iio/iio.h:iio_priv
   Cyclomatic Complexity 1 include/linux/platform_device.h:platform_set_drvdata
   Cyclomatic Complexity 1 drivers/iio//multiplexer/iio-mux.c:mux_driver_init
   Cyclomatic Complexity 7 drivers/iio//multiplexer/iio-mux.c:iio_mux_select
   Cyclomatic Complexity 1 drivers/iio//multiplexer/iio-mux.c:iio_mux_deselect
   Cyclomatic Complexity 5 drivers/iio//multiplexer/iio-mux.c:mux_write_ext_info
   Cyclomatic Complexity 2 drivers/iio//multiplexer/iio-mux.c:mux_read_ext_info
   Cyclomatic Complexity 3 drivers/iio//multiplexer/iio-mux.c:mux_write_raw
   Cyclomatic Complexity 3 drivers/iio//multiplexer/iio-mux.c:mux_read_avail
   Cyclomatic Complexity 4 drivers/iio//multiplexer/iio-mux.c:mux_read_raw
   Cyclomatic Complexity 16 drivers/iio//multiplexer/iio-mux.c:mux_configure_channel
   Cyclomatic Complexity 20 drivers/iio//multiplexer/iio-mux.c:mux_probe
   Cyclomatic Complexity 1 drivers/iio//multiplexer/iio-mux.c:mux_driver_exit

vim +228 include/linux/iio/consumer.h

   217	
   218	/**
   219	 * iio_write_channel_attribute() - Write values to the device attribute.
   220	 * @chan:	The channel being queried.
   221	 * @val:	Value being written.
   222	 * @val2:	Value being written.val2 use depends on attribute type.
   223	 * @attribute:	info attribute to be read.
   224	 *
   225	 * Returns an error code or 0.
   226	 */
   227	int iio_write_channel_attribute(struct iio_channel *chan, int val,
 > 228					int val2, enum iio_chan_info_enum attribute);
   229	

---
0-DAY kernel test infrastructure                Open Source Technology Center
https://lists.01.org/pipermail/kbuild-all                   Intel Corporation

[-- Attachment #2: .config.gz --]
[-- Type: application/gzip, Size: 28248 bytes --]

[PATCH v5 07/13] IIO: add DT bindings for stm32 DFSDM filter

[Arnaud Pouliquen]

Add bindings that describes STM32 Digital Filter for Sigma Delta
Modulators. DFSDM allows to connect sigma delta
modulators.

Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen-qxv4g6HH51o@public.gmane.org>
Acked-by: Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
---
 .../bindings/iio/adc/st,stm32-dfsdm-adc.txt        | 127 +++++++++++++++++++++
 1 file changed, 127 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.txt

diff --git a/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.txt b/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.txt
new file mode 100644
index 0000000..4a42d76
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.txt
@@ -0,0 +1,127 @@
+STMicroelectronics STM32 DFSDM ADC device driver
+
+
+STM32 DFSDM ADC is a sigma delta analog-to-digital converter dedicated to
+interface external sigma delta modulators to STM32 micro controllers.
+It is mainly targeted for:
+- Sigma delta modulators (motor control, metering...)
+- PDM microphones (audio digital microphone)
+
+It features up to 8 serial digital interfaces (SPI or Manchester) and
+up to 4 filters on stm32h7.
+
+Each child node match with a filter instance.
+
+Contents of a STM32 DFSDM root node:
+------------------------------------
+Required properties:
+- compatible: Should be "st,stm32h7-dfsdm".
+- reg: Offset and length of the DFSDM block register set.
+- clocks: IP and serial interfaces clocking. Should be set according
+		to rcc clock ID and "clock-names".
+- clock-names: Input clock name "dfsdm" must be defined,
+		"audio" is optional. If defined CLKOUT is based on the audio
+		clock, else "dfsdm" is used.
+- #interrupt-cells = <1>;
+- #address-cells = <1>;
+- #size-cells = <0>;
+
+Optional properties:
+- spi-max-frequency: Requested only for SPI master mode.
+		  SPI clock OUT frequency (Hz). This clock must be set according
+		  to "clock" property. Frequency must be a multiple of the rcc
+		  clock frequency. If not, SPI CLKOUT frequency will not be
+		  accurate.
+
+Contents of a STM32 DFSDM child nodes:
+--------------------------------------
+
+Required properties:
+- compatible: Must be:
+	"st,stm32-dfsdm-adc" for sigma delta ADCs
+	"st,stm32-dfsdm-dmic" for audio digital microphone.
+- reg: Specifies the DFSDM filter instance used.
+- interrupts: IRQ lines connected to each DFSDM filter instance.
+- st,adc-channels:	List of single-ended channels muxed for this ADC.
+			valid values:
+				"st,stm32h7-dfsdm" compatibility: 0 to 7.
+- st,adc-channel-names:	List of single-ended channel names.
+- st,filter-order:  SinC filter order from 0 to 5.
+			0: FastSinC
+			[1-5]: order 1 to 5.
+			For audio purpose it is recommended to use order 3 to 5.
+- #io-channel-cells = <1>: See the IIO bindings section "IIO consumers".
+
+Required properties for "st,stm32-dfsdm-adc" compatibility:
+- io-channels: From common IIO binding. Used to pipe external sigma delta
+		modulator or internal ADC output to DFSDM channel.
+		This is not required for "st,stm32-dfsdm-pdm" compatibility as
+		PDM microphone is binded in Audio DT node.
+
+Required properties for "st,stm32-dfsdm-pdm" compatibility:
+- #sound-dai-cells: Must be set to 0.
+- dma: DMA controller phandle and DMA request line associated to the
+		filter instance (specified by the field "reg")
+- dma-names: Must be "rx"
+
+Optional properties:
+- st,adc-channel-types:	Single-ended channel input type.
+			- "SPI_R": SPI with data on rising edge (default)
+			- "SPI_F": SPI with data on falling edge
+			- "MANCH_R": manchester codec, rising edge = logic 0
+			- "MANCH_F": manchester codec, falling edge = logic 1
+- st,adc-channel-clk-src: Conversion clock source.
+			  - "CLKIN": external SPI clock (CLKIN x)
+			  - "CLKOUT": internal SPI clock (CLKOUT) (default)
+			  - "CLKOUT_F": internal SPI clock divided by 2 (falling edge).
+			  - "CLKOUT_R": internal SPI clock divided by 2 (rising edge).
+
+- st,adc-alt-channel: Must be defined if two sigma delta modulator are
+			  connected on same SPI input.
+			  If not set, channel n is connected to SPI input n.
+			  If set, channel n is connected to SPI input n + 1.
+
+- st,filter0-sync: Set to 1 to synchronize with DFSDM filter instance 0.
+		   Used for multi microphones synchronization.
+
+Example of a sigma delta adc connected on DFSDM SPI port 0
+and a pdm microphone connected on DFSDM SPI port 1:
+
+	ads1202: simple_sd_adc@0 {
+		compatible = "ads1202";
+		#io-channel-cells = <1>;
+	};
+
+	dfsdm: dfsdm@40017000 {
+		compatible = "st,stm32h7-dfsdm";
+		reg = <0x40017000 0x400>;
+		clocks = <&rcc DFSDM1_CK>;
+		clock-names = "dfsdm";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		dfsdm_adc0: dfsdm-adc@0 {
+			compatible = "st,stm32-dfsdm-adc";
+			#io-channel-cells = <1>;
+			reg = <0>;
+			interrupts = <110>;
+			st,adc-channels = <0>;
+			st,adc-channel-names = "sd_adc0";
+			st,adc-channel-types = "SPI_F";
+			st,adc-channel-clk-src = "CLKOUT";
+			io-channels = <&ads1202 0>;
+			st,filter-order = <3>;
+		};
+		dfsdm_pdm1: dfsdm-pdm@1 {
+			compatible = "st,stm32-dfsdm-dmic";
+			reg = <1>;
+			interrupts = <111>;
+			dmas = <&dmamux1 102 0x400 0x00>;
+			dma-names = "rx";
+			st,adc-channels = <1>;
+			st,adc-channel-names = "dmic1";
+			st,adc-channel-types = "SPI_R";
+			st,adc-channel-clk-src = "CLKOUT";
+			st,filter-order = <5>;
+		};
+	}
-- 
2.7.4

[PATCH v5 08/13] IIO: ADC: add stm32 DFSDM core support

[Arnaud Pouliquen]

Add driver for stm32 DFSDM pheripheral. Its converts a sigma delta
stream in n bit samples through a low pass filter and an integrator.
stm32-dfsdm-core driver is the core part supporting the filter
instances dedicated to sigma-delta ADC or audio PDM microphone purpose.

Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen-qxv4g6HH51o@public.gmane.org>
Reviewed-by: Jonathan Cameron <jonathan.cameron-hv44wF8Li93QT0dZR+AlfA@public.gmane.org>
---
 drivers/iio/adc/Kconfig            |  12 ++
 drivers/iio/adc/Makefile           |   1 +
 drivers/iio/adc/stm32-dfsdm-core.c | 318 ++++++++++++++++++++++++++++++++++++
 drivers/iio/adc/stm32-dfsdm.h      | 319 +++++++++++++++++++++++++++++++++++++
 4 files changed, 650 insertions(+)
 create mode 100644 drivers/iio/adc/stm32-dfsdm-core.c
 create mode 100644 drivers/iio/adc/stm32-dfsdm.h

diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig
index c5db62f..b729ae0 100644
--- a/drivers/iio/adc/Kconfig
+++ b/drivers/iio/adc/Kconfig
@@ -665,6 +665,18 @@ config STM32_ADC
 	  This driver can also be built as a module.  If so, the module
 	  will be called stm32-adc.
 
+config STM32_DFSDM_CORE
+	tristate "STMicroelectronics STM32 DFSDM core"
+	depends on (ARCH_STM32 && OF) || COMPILE_TEST
+	select REGMAP
+	select REGMAP_MMIO
+	help
+	  Select this option to enable the  driver for STMicroelectronics
+	  STM32 digital filter for sigma delta converter.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called stm32-dfsdm-core.
+
 config STX104
 	tristate "Apex Embedded Systems STX104 driver"
 	depends on PC104 && X86 && ISA_BUS_API
diff --git a/drivers/iio/adc/Makefile b/drivers/iio/adc/Makefile
index d800325..b52d0a0 100644
--- a/drivers/iio/adc/Makefile
+++ b/drivers/iio/adc/Makefile
@@ -63,6 +63,7 @@ obj-$(CONFIG_STX104) += stx104.o
 obj-$(CONFIG_SUN4I_GPADC) += sun4i-gpadc-iio.o
 obj-$(CONFIG_STM32_ADC_CORE) += stm32-adc-core.o
 obj-$(CONFIG_STM32_ADC) += stm32-adc.o
+obj-$(CONFIG_STM32_DFSDM_CORE) += stm32-dfsdm-core.o
 obj-$(CONFIG_TI_ADC081C) += ti-adc081c.o
 obj-$(CONFIG_TI_ADC0832) += ti-adc0832.o
 obj-$(CONFIG_TI_ADC084S021) += ti-adc084s021.o
diff --git a/drivers/iio/adc/stm32-dfsdm-core.c b/drivers/iio/adc/stm32-dfsdm-core.c
new file mode 100644
index 0000000..0be5155
--- /dev/null
+++ b/drivers/iio/adc/stm32-dfsdm-core.c
@@ -0,0 +1,318 @@
+/*
+ * This file is part the core part STM32 DFSDM driver
+ *
+ * Copyright (C) 2017, STMicroelectronics - All Rights Reserved
+ * Author(s): Arnaud Pouliquen <arnaud.pouliquen-qxv4g6HH51o@public.gmane.org> for STMicroelectronics.
+ *
+ * License terms: GPL V2.0.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more
+ * details.
+ */
+
+#include <linux/clk.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+
+#include "stm32-dfsdm.h"
+
+struct stm32_dfsdm_dev_data {
+	unsigned int num_filters;
+	unsigned int num_channels;
+	const struct regmap_config *regmap_cfg;
+};
+
+#define STM32H7_DFSDM_NUM_FILTERS	4
+#define STM32H7_DFSDM_NUM_CHANNELS	8
+
+static bool stm32_dfsdm_volatile_reg(struct device *dev, unsigned int reg)
+{
+	if (reg < DFSDM_FILTER_BASE_ADR)
+		return false;
+
+	/*
+	 * Mask is done on register to avoid to list registers of all
+	 * filter instances.
+	 */
+	switch (reg & DFSDM_FILTER_REG_MASK) {
+	case DFSDM_CR1(0) & DFSDM_FILTER_REG_MASK:
+	case DFSDM_ISR(0) & DFSDM_FILTER_REG_MASK:
+	case DFSDM_JDATAR(0) & DFSDM_FILTER_REG_MASK:
+	case DFSDM_RDATAR(0) & DFSDM_FILTER_REG_MASK:
+		return true;
+	}
+
+	return false;
+}
+
+static const struct regmap_config stm32h7_dfsdm_regmap_cfg = {
+	.reg_bits = 32,
+	.val_bits = 32,
+	.reg_stride = sizeof(u32),
+	.max_register = 0x2B8,
+	.volatile_reg = stm32_dfsdm_volatile_reg,
+	.fast_io = true,
+};
+
+static const struct stm32_dfsdm_dev_data stm32h7_dfsdm_data = {
+	.num_filters = STM32H7_DFSDM_NUM_FILTERS,
+	.num_channels = STM32H7_DFSDM_NUM_CHANNELS,
+	.regmap_cfg = &stm32h7_dfsdm_regmap_cfg,
+};
+
+struct dfsdm_priv {
+	struct platform_device *pdev; /* platform device */
+
+	struct stm32_dfsdm dfsdm; /* common data exported for all instances */
+
+	unsigned int spi_clk_out_div; /* SPI clkout divider value */
+	atomic_t n_active_ch;	/* number of current active channels */
+
+	struct clk *clk; /* DFSDM clock */
+	struct clk *aclk; /* audio clock */
+};
+
+/**
+ * stm32_dfsdm_start_dfsdm - start global dfsdm interface.
+ *
+ * Enable interface if n_active_ch is not null.
+ * @dfsdm: Handle used to retrieve dfsdm context.
+ */
+int stm32_dfsdm_start_dfsdm(struct stm32_dfsdm *dfsdm)
+{
+	struct dfsdm_priv *priv = container_of(dfsdm, struct dfsdm_priv, dfsdm);
+	struct device *dev = &priv->pdev->dev;
+	unsigned int clk_div = priv->spi_clk_out_div;
+	int ret;
+
+	if (atomic_inc_return(&priv->n_active_ch) == 1) {
+		ret = clk_prepare_enable(priv->clk);
+		if (ret < 0) {
+			dev_err(dev, "Failed to start clock\n");
+			goto error_ret;
+		}
+		if (priv->aclk) {
+			ret = clk_prepare_enable(priv->aclk);
+			if (ret < 0) {
+				dev_err(dev, "Failed to start audio clock\n");
+				goto disable_clk;
+			}
+		}
+
+		/* Output the SPI CLKOUT (if clk_div == 0 clock if OFF) */
+		ret = regmap_update_bits(dfsdm->regmap, DFSDM_CHCFGR1(0),
+					 DFSDM_CHCFGR1_CKOUTDIV_MASK,
+					 DFSDM_CHCFGR1_CKOUTDIV(clk_div));
+		if (ret < 0)
+			goto disable_aclk;
+
+		/* Global enable of DFSDM interface */
+		ret = regmap_update_bits(dfsdm->regmap, DFSDM_CHCFGR1(0),
+					 DFSDM_CHCFGR1_DFSDMEN_MASK,
+					 DFSDM_CHCFGR1_DFSDMEN(1));
+		if (ret < 0)
+			goto disable_aclk;
+	}
+
+	dev_dbg(dev, "%s: n_active_ch %d\n", __func__,
+		atomic_read(&priv->n_active_ch));
+
+	return 0;
+
+disable_aclk:
+	clk_disable_unprepare(priv->aclk);
+disable_clk:
+	clk_disable_unprepare(priv->clk);
+
+error_ret:
+	atomic_dec(&priv->n_active_ch);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(stm32_dfsdm_start_dfsdm);
+
+/**
+ * stm32_dfsdm_stop_dfsdm - stop global DFSDM interface.
+ *
+ * Disable interface if n_active_ch is null
+ * @dfsdm: Handle used to retrieve dfsdm context.
+ */
+int stm32_dfsdm_stop_dfsdm(struct stm32_dfsdm *dfsdm)
+{
+	struct dfsdm_priv *priv = container_of(dfsdm, struct dfsdm_priv, dfsdm);
+	int ret;
+
+	if (atomic_dec_and_test(&priv->n_active_ch)) {
+		/* Global disable of DFSDM interface */
+		ret = regmap_update_bits(dfsdm->regmap, DFSDM_CHCFGR1(0),
+					 DFSDM_CHCFGR1_DFSDMEN_MASK,
+					 DFSDM_CHCFGR1_DFSDMEN(0));
+		if (ret < 0)
+			return ret;
+
+		/* Stop SPI CLKOUT */
+		ret = regmap_update_bits(dfsdm->regmap, DFSDM_CHCFGR1(0),
+					 DFSDM_CHCFGR1_CKOUTDIV_MASK,
+					 DFSDM_CHCFGR1_CKOUTDIV(0));
+		if (ret < 0)
+			return ret;
+
+		clk_disable_unprepare(priv->clk);
+		if (priv->aclk)
+			clk_disable_unprepare(priv->aclk);
+	}
+	dev_dbg(&priv->pdev->dev, "%s: n_active_ch %d\n", __func__,
+		atomic_read(&priv->n_active_ch));
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(stm32_dfsdm_stop_dfsdm);
+
+static int stm32_dfsdm_parse_of(struct platform_device *pdev,
+				struct dfsdm_priv *priv)
+{
+	struct device_node *node = pdev->dev.of_node;
+	struct resource *res;
+	unsigned long clk_freq;
+	unsigned int spi_freq, rem;
+	int ret;
+
+	if (!node)
+		return -EINVAL;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		dev_err(&pdev->dev, "Failed to get memory resource\n");
+		return -ENODEV;
+	}
+	priv->dfsdm.phys_base = res->start;
+	priv->dfsdm.base = devm_ioremap_resource(&pdev->dev, res);
+
+	/*
+	 * "dfsdm" clock is mandatory for DFSDM peripheral clocking.
+	 * "dfsdm" or "audio" clocks can be used as source clock for
+	 * the SPI clock out signal and internal processing, depending
+	 * on use case.
+	 */
+	priv->clk = devm_clk_get(&pdev->dev, "dfsdm");
+	if (IS_ERR(priv->clk)) {
+		dev_err(&pdev->dev, "No stm32_dfsdm_clk clock found\n");
+		return -EINVAL;
+	}
+
+	priv->aclk = devm_clk_get(&pdev->dev, "audio");
+	if (IS_ERR(priv->aclk))
+		priv->aclk = NULL;
+
+	if (priv->aclk)
+		clk_freq = clk_get_rate(priv->aclk);
+	else
+		clk_freq = clk_get_rate(priv->clk);
+
+	/* SPI clock out frequency */
+	ret = of_property_read_u32(pdev->dev.of_node, "spi-max-frequency",
+				   &spi_freq);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "Failed to get spi-max-frequency\n");
+		return ret;
+	}
+
+	priv->spi_clk_out_div = div_u64_rem(clk_freq, spi_freq, &rem) - 1;
+	priv->dfsdm.spi_master_freq = spi_freq;
+
+	if (rem) {
+		dev_warn(&pdev->dev, "SPI clock not accurate\n");
+		dev_warn(&pdev->dev, "%ld = %d * %d + %d\n",
+			 clk_freq, spi_freq, priv->spi_clk_out_div + 1, rem);
+	}
+
+	return 0;
+};
+
+static const struct of_device_id stm32_dfsdm_of_match[] = {
+	{
+		.compatible = "st,stm32h7-dfsdm",
+		.data = &stm32h7_dfsdm_data,
+	},
+	{}
+};
+MODULE_DEVICE_TABLE(of, stm32_dfsdm_of_match);
+
+static int stm32_dfsdm_probe(struct platform_device *pdev)
+{
+	struct dfsdm_priv *priv;
+	struct device_node *pnode = pdev->dev.of_node;
+	const struct of_device_id *of_id;
+	const struct stm32_dfsdm_dev_data *dev_data;
+	struct stm32_dfsdm *dfsdm;
+	int ret;
+
+	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->pdev = pdev;
+
+	of_id = of_match_node(stm32_dfsdm_of_match, pnode);
+	if (!of_id->data) {
+		dev_err(&pdev->dev, "Data associated to device is missing\n");
+		return -EINVAL;
+	}
+
+	dev_data = (const struct stm32_dfsdm_dev_data *)of_id->data;
+	dfsdm = &priv->dfsdm;
+	dfsdm->fl_list = devm_kcalloc(&pdev->dev, dev_data->num_filters,
+				      sizeof(*dfsdm->fl_list), GFP_KERNEL);
+	if (!dfsdm->fl_list)
+		return -ENOMEM;
+
+	dfsdm->num_fls = dev_data->num_filters;
+	dfsdm->ch_list = devm_kcalloc(&pdev->dev, dev_data->num_channels,
+				      sizeof(*dfsdm->ch_list),
+				      GFP_KERNEL);
+	if (!dfsdm->ch_list)
+		return -ENOMEM;
+	dfsdm->num_chs = dev_data->num_channels;
+
+	ret = stm32_dfsdm_parse_of(pdev, priv);
+	if (ret < 0)
+		return ret;
+
+	dfsdm->regmap = devm_regmap_init_mmio(&pdev->dev, dfsdm->base,
+					      &stm32h7_dfsdm_regmap_cfg);
+	if (IS_ERR(dfsdm->regmap)) {
+		ret = PTR_ERR(dfsdm->regmap);
+		dev_err(&pdev->dev, "%s: Failed to allocate regmap: %d\n",
+			__func__, ret);
+		return ret;
+	}
+
+	platform_set_drvdata(pdev, dfsdm);
+
+	return devm_of_platform_populate(&pdev->dev);
+}
+
+static struct platform_driver stm32_dfsdm_driver = {
+	.probe = stm32_dfsdm_probe,
+	.driver = {
+		.name = "stm32-dfsdm",
+		.of_match_table = stm32_dfsdm_of_match,
+	},
+};
+
+module_platform_driver(stm32_dfsdm_driver);
+
+MODULE_AUTHOR("Arnaud Pouliquen <arnaud.pouliquen-qxv4g6HH51o@public.gmane.org>");
+MODULE_DESCRIPTION("STMicroelectronics STM32 dfsdm driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/iio/adc/stm32-dfsdm.h b/drivers/iio/adc/stm32-dfsdm.h
new file mode 100644
index 0000000..9990e8b
--- /dev/null
+++ b/drivers/iio/adc/stm32-dfsdm.h
@@ -0,0 +1,319 @@
+/*
+ * This file is part of STM32 DFSDM driver
+ *
+ * Copyright (C) 2017, STMicroelectronics - All Rights Reserved
+ * Author(s): Arnaud Pouliquen <arnaud.pouliquen-qxv4g6HH51o@public.gmane.org>.
+ *
+ * License terms: GPL V2.0.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more
+ * details.
+ */
+#ifndef MDF_STM32_DFSDM__H
+#define MDF_STM32_DFSDM__H
+
+#include <linux/bitfield.h>
+
+/*
+ * STM32 DFSDM - global register map
+ * ________________________________________________________
+ * | Offset |                 Registers block             |
+ * --------------------------------------------------------
+ * | 0x000  |      CHANNEL 0 + COMMON CHANNEL FIELDS      |
+ * --------------------------------------------------------
+ * | 0x020  |                CHANNEL 1                    |
+ * --------------------------------------------------------
+ * | ...    |                .....                        |
+ * --------------------------------------------------------
+ * | 0x0E0  |                CHANNEL 7                    |
+ * --------------------------------------------------------
+ * | 0x100  |      FILTER  0 + COMMON  FILTER FIELDs      |
+ * --------------------------------------------------------
+ * | 0x200  |                FILTER  1                    |
+ * --------------------------------------------------------
+ * | 0x300  |                FILTER  2                    |
+ * --------------------------------------------------------
+ * | 0x400  |                FILTER  3                    |
+ * --------------------------------------------------------
+ */
+
+/*
+ * Channels register definitions
+ */
+#define DFSDM_CHCFGR1(y)  ((y) * 0x20 + 0x00)
+#define DFSDM_CHCFGR2(y)  ((y) * 0x20 + 0x04)
+#define DFSDM_AWSCDR(y)   ((y) * 0x20 + 0x08)
+#define DFSDM_CHWDATR(y)  ((y) * 0x20 + 0x0C)
+#define DFSDM_CHDATINR(y) ((y) * 0x20 + 0x10)
+
+/* CHCFGR1: Channel configuration register 1 */
+#define DFSDM_CHCFGR1_SITP_MASK     GENMASK(1, 0)
+#define DFSDM_CHCFGR1_SITP(v)       FIELD_PREP(DFSDM_CHCFGR1_SITP_MASK, v)
+#define DFSDM_CHCFGR1_SPICKSEL_MASK GENMASK(3, 2)
+#define DFSDM_CHCFGR1_SPICKSEL(v)   FIELD_PREP(DFSDM_CHCFGR1_SPICKSEL_MASK, v)
+#define DFSDM_CHCFGR1_SCDEN_MASK    BIT(5)
+#define DFSDM_CHCFGR1_SCDEN(v)      FIELD_PREP(DFSDM_CHCFGR1_SCDEN_MASK, v)
+#define DFSDM_CHCFGR1_CKABEN_MASK   BIT(6)
+#define DFSDM_CHCFGR1_CKABEN(v)     FIELD_PREP(DFSDM_CHCFGR1_CKABEN_MASK, v)
+#define DFSDM_CHCFGR1_CHEN_MASK     BIT(7)
+#define DFSDM_CHCFGR1_CHEN(v)       FIELD_PREP(DFSDM_CHCFGR1_CHEN_MASK, v)
+#define DFSDM_CHCFGR1_CHINSEL_MASK  BIT(8)
+#define DFSDM_CHCFGR1_CHINSEL(v)    FIELD_PREP(DFSDM_CHCFGR1_CHINSEL_MASK, v)
+#define DFSDM_CHCFGR1_DATMPX_MASK   GENMASK(13, 12)
+#define DFSDM_CHCFGR1_DATMPX(v)     FIELD_PREP(DFSDM_CHCFGR1_DATMPX_MASK, v)
+#define DFSDM_CHCFGR1_DATPACK_MASK  GENMASK(15, 14)
+#define DFSDM_CHCFGR1_DATPACK(v)    FIELD_PREP(DFSDM_CHCFGR1_DATPACK_MASK, v)
+#define DFSDM_CHCFGR1_CKOUTDIV_MASK GENMASK(23, 16)
+#define DFSDM_CHCFGR1_CKOUTDIV(v)   FIELD_PREP(DFSDM_CHCFGR1_CKOUTDIV_MASK, v)
+#define DFSDM_CHCFGR1_CKOUTSRC_MASK BIT(30)
+#define DFSDM_CHCFGR1_CKOUTSRC(v)   FIELD_PREP(DFSDM_CHCFGR1_CKOUTSRC_MASK, v)
+#define DFSDM_CHCFGR1_DFSDMEN_MASK  BIT(31)
+#define DFSDM_CHCFGR1_DFSDMEN(v)    FIELD_PREP(DFSDM_CHCFGR1_DFSDMEN_MASK, v)
+
+/* CHCFGR2: Channel configuration register 2 */
+#define DFSDM_CHCFGR2_DTRBS_MASK    GENMASK(7, 3)
+#define DFSDM_CHCFGR2_DTRBS(v)      FIELD_PREP(DFSDM_CHCFGR2_DTRBS_MASK, v)
+#define DFSDM_CHCFGR2_OFFSET_MASK   GENMASK(31, 8)
+#define DFSDM_CHCFGR2_OFFSET(v)     FIELD_PREP(DFSDM_CHCFGR2_OFFSET_MASK, v)
+
+/* AWSCDR: Channel analog watchdog and short circuit detector */
+#define DFSDM_AWSCDR_SCDT_MASK    GENMASK(7, 0)
+#define DFSDM_AWSCDR_SCDT(v)      FIELD_PREP(DFSDM_AWSCDR_SCDT_MASK, v)
+#define DFSDM_AWSCDR_BKSCD_MASK   GENMASK(15, 12)
+#define DFSDM_AWSCDR_BKSCD(v)	  FIELD_PREP(DFSDM_AWSCDR_BKSCD_MASK, v)
+#define DFSDM_AWSCDR_AWFOSR_MASK  GENMASK(20, 16)
+#define DFSDM_AWSCDR_AWFOSR(v)    FIELD_PREP(DFSDM_AWSCDR_AWFOSR_MASK, v)
+#define DFSDM_AWSCDR_AWFORD_MASK  GENMASK(23, 22)
+#define DFSDM_AWSCDR_AWFORD(v)    FIELD_PREP(DFSDM_AWSCDR_AWFORD_MASK, v)
+
+/*
+ * Filters register definitions
+ */
+#define DFSDM_FILTER_BASE_ADR		0x100
+#define DFSDM_FILTER_REG_MASK		0x7F
+#define DFSDM_FILTER_X_BASE_ADR(x)	((x) * 0x80 + DFSDM_FILTER_BASE_ADR)
+
+#define DFSDM_CR1(x)     (DFSDM_FILTER_X_BASE_ADR(x)  + 0x00)
+#define DFSDM_CR2(x)     (DFSDM_FILTER_X_BASE_ADR(x)  + 0x04)
+#define DFSDM_ISR(x)     (DFSDM_FILTER_X_BASE_ADR(x)  + 0x08)
+#define DFSDM_ICR(x)     (DFSDM_FILTER_X_BASE_ADR(x)  + 0x0C)
+#define DFSDM_JCHGR(x)   (DFSDM_FILTER_X_BASE_ADR(x)  + 0x10)
+#define DFSDM_FCR(x)     (DFSDM_FILTER_X_BASE_ADR(x)  + 0x14)
+#define DFSDM_JDATAR(x)  (DFSDM_FILTER_X_BASE_ADR(x)  + 0x18)
+#define DFSDM_RDATAR(x)  (DFSDM_FILTER_X_BASE_ADR(x)  + 0x1C)
+#define DFSDM_AWHTR(x)   (DFSDM_FILTER_X_BASE_ADR(x)  + 0x20)
+#define DFSDM_AWLTR(x)   (DFSDM_FILTER_X_BASE_ADR(x)  + 0x24)
+#define DFSDM_AWSR(x)    (DFSDM_FILTER_X_BASE_ADR(x)  + 0x28)
+#define DFSDM_AWCFR(x)   (DFSDM_FILTER_X_BASE_ADR(x)  + 0x2C)
+#define DFSDM_EXMAX(x)   (DFSDM_FILTER_X_BASE_ADR(x)  + 0x30)
+#define DFSDM_EXMIN(x)   (DFSDM_FILTER_X_BASE_ADR(x)  + 0x34)
+#define DFSDM_CNVTIMR(x) (DFSDM_FILTER_X_BASE_ADR(x)  + 0x38)
+
+/* CR1 Control register 1 */
+#define DFSDM_CR1_DFEN_MASK	BIT(0)
+#define DFSDM_CR1_DFEN(v)	FIELD_PREP(DFSDM_CR1_DFEN_MASK, v)
+#define DFSDM_CR1_JSWSTART_MASK	BIT(1)
+#define DFSDM_CR1_JSWSTART(v)	FIELD_PREP(DFSDM_CR1_JSWSTART_MASK, v)
+#define DFSDM_CR1_JSYNC_MASK	BIT(3)
+#define DFSDM_CR1_JSYNC(v)	FIELD_PREP(DFSDM_CR1_JSYNC_MASK, v)
+#define DFSDM_CR1_JSCAN_MASK	BIT(4)
+#define DFSDM_CR1_JSCAN(v)	FIELD_PREP(DFSDM_CR1_JSCAN_MASK, v)
+#define DFSDM_CR1_JDMAEN_MASK	BIT(5)
+#define DFSDM_CR1_JDMAEN(v)	FIELD_PREP(DFSDM_CR1_JDMAEN_MASK, v)
+#define DFSDM_CR1_JEXTSEL_MASK	GENMASK(12, 8)
+#define DFSDM_CR1_JEXTSEL(v)	FIELD_PREP(DFSDM_CR1_JEXTSEL_MASK, v)
+#define DFSDM_CR1_JEXTEN_MASK	GENMASK(14, 13)
+#define DFSDM_CR1_JEXTEN(v)	FIELD_PREP(DFSDM_CR1_JEXTEN_MASK, v)
+#define DFSDM_CR1_RSWSTART_MASK	BIT(17)
+#define DFSDM_CR1_RSWSTART(v)	FIELD_PREP(DFSDM_CR1_RSWSTART_MASK, v)
+#define DFSDM_CR1_RCONT_MASK	BIT(18)
+#define DFSDM_CR1_RCONT(v)	FIELD_PREP(DFSDM_CR1_RCONT_MASK, v)
+#define DFSDM_CR1_RSYNC_MASK	BIT(19)
+#define DFSDM_CR1_RSYNC(v)	FIELD_PREP(DFSDM_CR1_RSYNC_MASK, v)
+#define DFSDM_CR1_RDMAEN_MASK	BIT(21)
+#define DFSDM_CR1_RDMAEN(v)	FIELD_PREP(DFSDM_CR1_RDMAEN_MASK, v)
+#define DFSDM_CR1_RCH_MASK	GENMASK(26, 24)
+#define DFSDM_CR1_RCH(v)	FIELD_PREP(DFSDM_CR1_RCH_MASK, v)
+#define DFSDM_CR1_FAST_MASK	BIT(29)
+#define DFSDM_CR1_FAST(v)	FIELD_PREP(DFSDM_CR1_FAST_MASK, v)
+#define DFSDM_CR1_AWFSEL_MASK	BIT(30)
+#define DFSDM_CR1_AWFSEL(v)	FIELD_PREP(DFSDM_CR1_AWFSEL_MASK, v)
+
+/* CR2: Control register 2 */
+#define DFSDM_CR2_IE_MASK	GENMASK(6, 0)
+#define DFSDM_CR2_IE(v)		FIELD_PREP(DFSDM_CR2_IE_MASK, v)
+#define DFSDM_CR2_JEOCIE_MASK	BIT(0)
+#define DFSDM_CR2_JEOCIE(v)	FIELD_PREP(DFSDM_CR2_JEOCIE_MASK, v)
+#define DFSDM_CR2_REOCIE_MASK	BIT(1)
+#define DFSDM_CR2_REOCIE(v)	FIELD_PREP(DFSDM_CR2_REOCIE_MASK, v)
+#define DFSDM_CR2_JOVRIE_MASK	BIT(2)
+#define DFSDM_CR2_JOVRIE(v)	FIELD_PREP(DFSDM_CR2_JOVRIE_MASK, v)
+#define DFSDM_CR2_ROVRIE_MASK	BIT(3)
+#define DFSDM_CR2_ROVRIE(v)	FIELD_PREP(DFSDM_CR2_ROVRIE_MASK, v)
+#define DFSDM_CR2_AWDIE_MASK	BIT(4)
+#define DFSDM_CR2_AWDIE(v)	FIELD_PREP(DFSDM_CR2_AWDIE_MASK, v)
+#define DFSDM_CR2_SCDIE_MASK	BIT(5)
+#define DFSDM_CR2_SCDIE(v)	FIELD_PREP(DFSDM_CR2_SCDIE_MASK, v)
+#define DFSDM_CR2_CKABIE_MASK	BIT(6)
+#define DFSDM_CR2_CKABIE(v)	FIELD_PREP(DFSDM_CR2_CKABIE_MASK, v)
+#define DFSDM_CR2_EXCH_MASK	GENMASK(15, 8)
+#define DFSDM_CR2_EXCH(v)	FIELD_PREP(DFSDM_CR2_EXCH_MASK, v)
+#define DFSDM_CR2_AWDCH_MASK	GENMASK(23, 16)
+#define DFSDM_CR2_AWDCH(v)	FIELD_PREP(DFSDM_CR2_AWDCH_MASK, v)
+
+/* ISR: Interrupt status register */
+#define DFSDM_ISR_JEOCF_MASK	BIT(0)
+#define DFSDM_ISR_JEOCF(v)	FIELD_PREP(DFSDM_ISR_JEOCF_MASK, v)
+#define DFSDM_ISR_REOCF_MASK	BIT(1)
+#define DFSDM_ISR_REOCF(v)	FIELD_PREP(DFSDM_ISR_REOCF_MASK, v)
+#define DFSDM_ISR_JOVRF_MASK	BIT(2)
+#define DFSDM_ISR_JOVRF(v)	FIELD_PREP(DFSDM_ISR_JOVRF_MASK, v)
+#define DFSDM_ISR_ROVRF_MASK	BIT(3)
+#define DFSDM_ISR_ROVRF(v)	FIELD_PREP(DFSDM_ISR_ROVRF_MASK, v)
+#define DFSDM_ISR_AWDF_MASK	BIT(4)
+#define DFSDM_ISR_AWDF(v)	FIELD_PREP(DFSDM_ISR_AWDF_MASK, v)
+#define DFSDM_ISR_JCIP_MASK	BIT(13)
+#define DFSDM_ISR_JCIP(v)	FIELD_PREP(DFSDM_ISR_JCIP_MASK, v)
+#define DFSDM_ISR_RCIP_MASK	BIT(14)
+#define DFSDM_ISR_RCIP(v)	FIELD_PREP(DFSDM_ISR_RCIP, v)
+#define DFSDM_ISR_CKABF_MASK	GENMASK(23, 16)
+#define DFSDM_ISR_CKABF(v)	FIELD_PREP(DFSDM_ISR_CKABF_MASK, v)
+#define DFSDM_ISR_SCDF_MASK	GENMASK(31, 24)
+#define DFSDM_ISR_SCDF(v)	FIELD_PREP(DFSDM_ISR_SCDF_MASK, v)
+
+/* ICR: Interrupt flag clear register */
+#define DFSDM_ICR_CLRJOVRF_MASK	      BIT(2)
+#define DFSDM_ICR_CLRJOVRF(v)	      FIELD_PREP(DFSDM_ICR_CLRJOVRF_MASK, v)
+#define DFSDM_ICR_CLRROVRF_MASK	      BIT(3)
+#define DFSDM_ICR_CLRROVRF(v)	      FIELD_PREP(DFSDM_ICR_CLRROVRF_MASK, v)
+#define DFSDM_ICR_CLRCKABF_MASK	      GENMASK(23, 16)
+#define DFSDM_ICR_CLRCKABF(v)	      FIELD_PREP(DFSDM_ICR_CLRCKABF_MASK, v)
+#define DFSDM_ICR_CLRCKABF_CH_MASK(y) BIT(16 + (y))
+#define DFSDM_ICR_CLRCKABF_CH(v, y)   \
+			   (((v) << (16 + (y))) & DFSDM_ICR_CLRCKABF_CH_MASK(y))
+#define DFSDM_ICR_CLRSCDF_MASK	      GENMASK(31, 24)
+#define DFSDM_ICR_CLRSCDF(v)	      FIELD_PREP(DFSDM_ICR_CLRSCDF_MASK, v)
+#define DFSDM_ICR_CLRSCDF_CH_MASK(y)  BIT(24 + (y))
+#define DFSDM_ICR_CLRSCDF_CH(v, y)    \
+			       (((v) << (24 + (y))) & DFSDM_ICR_CLRSCDF_MASK(y))
+
+/* FCR: Filter control register */
+#define DFSDM_FCR_IOSR_MASK	GENMASK(7, 0)
+#define DFSDM_FCR_IOSR(v)	FIELD_PREP(DFSDM_FCR_IOSR_MASK, v)
+#define DFSDM_FCR_FOSR_MASK	GENMASK(25, 16)
+#define DFSDM_FCR_FOSR(v)	FIELD_PREP(DFSDM_FCR_FOSR_MASK, v)
+#define DFSDM_FCR_FORD_MASK	GENMASK(31, 29)
+#define DFSDM_FCR_FORD(v)	FIELD_PREP(DFSDM_FCR_FORD_MASK, v)
+
+/* RDATAR: Filter data register for regular channel */
+#define DFSDM_DATAR_CH_MASK	GENMASK(2, 0)
+#define DFSDM_DATAR_DATA_OFFSET 8
+#define DFSDM_DATAR_DATA_MASK	GENMASK(31, DFSDM_DATAR_DATA_OFFSET)
+
+/* AWLTR: Filter analog watchdog low threshold register */
+#define DFSDM_AWLTR_BKAWL_MASK	GENMASK(3, 0)
+#define DFSDM_AWLTR_BKAWL(v)	FIELD_PREP(DFSDM_AWLTR_BKAWL_MASK, v)
+#define DFSDM_AWLTR_AWLT_MASK	GENMASK(31, 8)
+#define DFSDM_AWLTR_AWLT(v)	FIELD_PREP(DFSDM_AWLTR_AWLT_MASK, v)
+
+/* AWHTR: Filter analog watchdog low threshold register */
+#define DFSDM_AWHTR_BKAWH_MASK	GENMASK(3, 0)
+#define DFSDM_AWHTR_BKAWH(v)	FIELD_PREP(DFSDM_AWHTR_BKAWH_MASK, v)
+#define DFSDM_AWHTR_AWHT_MASK	GENMASK(31, 8)
+#define DFSDM_AWHTR_AWHT(v)	FIELD_PREP(DFSDM_AWHTR_AWHT_MASK, v)
+
+/* AWSR: Filter watchdog status register */
+#define DFSDM_AWSR_AWLTF_MASK	GENMASK(7, 0)
+#define DFSDM_AWSR_AWLTF(v)	FIELD_PREP(DFSDM_AWSR_AWLTF_MASK, v)
+#define DFSDM_AWSR_AWHTF_MASK	GENMASK(15, 8)
+#define DFSDM_AWSR_AWHTF(v)	FIELD_PREP(DFSDM_AWSR_AWHTF_MASK, v)
+
+/* AWCFR: Filter watchdog status register */
+#define DFSDM_AWCFR_AWLTF_MASK	GENMASK(7, 0)
+#define DFSDM_AWCFR_AWLTF(v)	FIELD_PREP(DFSDM_AWCFR_AWLTF_MASK, v)
+#define DFSDM_AWCFR_AWHTF_MASK	GENMASK(15, 8)
+#define DFSDM_AWCFR_AWHTF(v)	FIELD_PREP(DFSDM_AWCFR_AWHTF_MASK, v)
+
+/* DFSDM filter order  */
+enum stm32_dfsdm_sinc_order {
+	DFSDM_FASTSINC_ORDER, /* FastSinc filter type */
+	DFSDM_SINC1_ORDER,    /* Sinc 1 filter type */
+	DFSDM_SINC2_ORDER,    /* Sinc 2 filter type */
+	DFSDM_SINC3_ORDER,    /* Sinc 3 filter type */
+	DFSDM_SINC4_ORDER,    /* Sinc 4 filter type (N.A. for watchdog) */
+	DFSDM_SINC5_ORDER,    /* Sinc 5 filter type (N.A. for watchdog) */
+	DFSDM_NB_SINC_ORDER,
+};
+
+/**
+ * struct stm32_dfsdm_filter - structure relative to stm32 FDSDM filter
+ * @iosr: integrator oversampling
+ * @fosr: filter oversampling
+ * @ford: filter order
+ * @res: output sample resolution
+ * @sync_mode: filter synchronized with filter 0
+ * @fast: filter fast mode
+ */
+struct stm32_dfsdm_filter {
+	unsigned int iosr;
+	unsigned int fosr;
+	enum stm32_dfsdm_sinc_order ford;
+	u64 res;
+	unsigned int sync_mode;
+	unsigned int fast;
+};
+
+/**
+ * struct stm32_dfsdm_channel - structure relative to stm32 FDSDM channel
+ * @id: id of the channel
+ * @type: interface type linked to stm32_dfsdm_chan_type
+ * @src: interface type linked to stm32_dfsdm_chan_src
+ * @alt_si: alternative serial input interface
+ */
+struct stm32_dfsdm_channel {
+	unsigned int id;
+	unsigned int type;
+	unsigned int src;
+	unsigned int alt_si;
+};
+
+/**
+ * struct stm32_dfsdm - stm32 FDSDM driver common data (for all instances)
+ * @base:	control registers base cpu addr
+ * @phys_base:	DFSDM IP register physical address
+ * @regmap:	regmap for register read/write
+ * @fl_list:	filter resources list
+ * @num_fls:	number of filter resources available
+ * @ch_list:	channel resources list
+ * @num_chs:	number of channel resources available
+ * @spi_master_freq: SPI clock out frequency
+ */
+struct stm32_dfsdm {
+	void __iomem	*base;
+	phys_addr_t	phys_base;
+	struct regmap *regmap;
+	struct stm32_dfsdm_filter *fl_list;
+	unsigned int num_fls;
+	struct stm32_dfsdm_channel *ch_list;
+	unsigned int num_chs;
+	unsigned int spi_master_freq;
+};
+
+/* DFSDM channel serial spi clock source */
+enum stm32_dfsdm_spi_clk_src {
+	DFSDM_CHANNEL_SPI_CLOCK_EXTERNAL,
+	DFSDM_CHANNEL_SPI_CLOCK_INTERNAL,
+	DFSDM_CHANNEL_SPI_CLOCK_INTERNAL_DIV2_FALLING,
+	DFSDM_CHANNEL_SPI_CLOCK_INTERNAL_DIV2_RISING
+};
+
+int stm32_dfsdm_start_dfsdm(struct stm32_dfsdm *dfsdm);
+int stm32_dfsdm_stop_dfsdm(struct stm32_dfsdm *dfsdm);
+
+#endif
-- 
2.7.4

[PATCH v5 09/13] IIO: ADC: add STM32 DFSDM sigma delta ADC support

[Arnaud Pouliquen]

Add DFSDM driver to handle sigma delta ADC.

Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen-qxv4g6HH51o@public.gmane.org>
---
V4 -> V5: no delta 

 drivers/iio/adc/Kconfig           |  13 +
 drivers/iio/adc/Makefile          |   1 +
 drivers/iio/adc/stm32-dfsdm-adc.c | 741 ++++++++++++++++++++++++++++++++++++++
 3 files changed, 755 insertions(+)
 create mode 100644 drivers/iio/adc/stm32-dfsdm-adc.c

diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig
index b729ae0..98ca30b 100644
--- a/drivers/iio/adc/Kconfig
+++ b/drivers/iio/adc/Kconfig
@@ -677,6 +677,19 @@ config STM32_DFSDM_CORE
 	  This driver can also be built as a module.  If so, the module
 	  will be called stm32-dfsdm-core.
 
+config STM32_DFSDM_ADC
+	tristate "STMicroelectronics STM32 dfsdm adc"
+	depends on (ARCH_STM32 && OF) || COMPILE_TEST
+	select STM32_DFSDM_CORE
+	select REGMAP_MMIO
+	select IIO_BUFFER_HW_CONSUMER
+	help
+	  Select this option to support ADCSigma delta modulator for
+	  STMicroelectronics STM32 digital filter for sigma delta converter.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called stm32-dfsdm-adc.
+
 config STX104
 	tristate "Apex Embedded Systems STX104 driver"
 	depends on PC104 && X86 && ISA_BUS_API
diff --git a/drivers/iio/adc/Makefile b/drivers/iio/adc/Makefile
index b52d0a0..c4f5d15 100644
--- a/drivers/iio/adc/Makefile
+++ b/drivers/iio/adc/Makefile
@@ -64,6 +64,7 @@ obj-$(CONFIG_SUN4I_GPADC) += sun4i-gpadc-iio.o
 obj-$(CONFIG_STM32_ADC_CORE) += stm32-adc-core.o
 obj-$(CONFIG_STM32_ADC) += stm32-adc.o
 obj-$(CONFIG_STM32_DFSDM_CORE) += stm32-dfsdm-core.o
+obj-$(CONFIG_STM32_DFSDM_ADC) += stm32-dfsdm-adc.o
 obj-$(CONFIG_TI_ADC081C) += ti-adc081c.o
 obj-$(CONFIG_TI_ADC0832) += ti-adc0832.o
 obj-$(CONFIG_TI_ADC084S021) += ti-adc084s021.o
diff --git a/drivers/iio/adc/stm32-dfsdm-adc.c b/drivers/iio/adc/stm32-dfsdm-adc.c
new file mode 100644
index 0000000..f9419ab
--- /dev/null
+++ b/drivers/iio/adc/stm32-dfsdm-adc.c
@@ -0,0 +1,741 @@
+/*
+ * This file is the ADC part of the STM32 DFSDM driver
+ *
+ * Copyright (C) 2017, STMicroelectronics - All Rights Reserved
+ * Author: Arnaud Pouliquen <arnaud.pouliquen-qxv4g6HH51o@public.gmane.org>.
+ *
+ * License type: GPL V2.0.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE.
+ * See the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/interrupt.h>
+#include <linux/iio/buffer.h>
+#include <linux/iio/hw-consumer.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+
+#include "stm32-dfsdm.h"
+
+/* Conversion timeout */
+#define DFSDM_TIMEOUT_US 100000
+#define DFSDM_TIMEOUT (msecs_to_jiffies(DFSDM_TIMEOUT_US / 1000))
+
+/* Oversampling attribute default */
+#define DFSDM_DEFAULT_OVERSAMPLING  100
+
+/* Oversampling max values */
+#define DFSDM_MAX_INT_OVERSAMPLING 256
+#define DFSDM_MAX_FL_OVERSAMPLING 1024
+
+/* Max sample resolutions */
+#define DFSDM_MAX_RES BIT(31)
+#define DFSDM_DATA_RES BIT(23)
+
+enum sd_converter_type {
+	DFSDM_AUDIO,
+	DFSDM_IIO,
+};
+
+struct stm32_dfsdm_dev_data {
+	int type;
+	int (*init)(struct iio_dev *indio_dev);
+	unsigned int num_channels;
+	const struct regmap_config *regmap_cfg;
+};
+
+struct stm32_dfsdm_adc {
+	struct stm32_dfsdm *dfsdm;
+	const struct stm32_dfsdm_dev_data *dev_data;
+	unsigned int fl_id;
+	unsigned int ch_id;
+
+	/* ADC specific */
+	unsigned int oversamp;
+	struct iio_hw_consumer *hwc;
+	struct completion completion;
+	u32 *buffer;
+
+};
+
+struct stm32_dfsdm_str2field {
+	const char	*name;
+	unsigned int	val;
+};
+
+/* DFSDM channel serial interface type */
+static const struct stm32_dfsdm_str2field stm32_dfsdm_chan_type[] = {
+	{ "SPI_R", 0 }, /* SPI with data on rising edge */
+	{ "SPI_F", 1 }, /* SPI with data on falling edge */
+	{ "MANCH_R", 2 }, /* Manchester codec, rising edge = logic 0 */
+	{ "MANCH_F", 3 }, /* Manchester codec, falling edge = logic 1 */
+	{},
+};
+
+/* DFSDM channel clock source */
+static const struct stm32_dfsdm_str2field stm32_dfsdm_chan_src[] = {
+	/* External SPI clock (CLKIN x) */
+	{ "CLKIN", DFSDM_CHANNEL_SPI_CLOCK_EXTERNAL },
+	/* Internal SPI clock (CLKOUT) */
+	{ "CLKOUT", DFSDM_CHANNEL_SPI_CLOCK_INTERNAL },
+	/* Internal SPI clock divided by 2 (falling edge) */
+	{ "CLKOUT_F", DFSDM_CHANNEL_SPI_CLOCK_INTERNAL_DIV2_FALLING },
+	/* Internal SPI clock divided by 2 (falling edge) */
+	{ "CLKOUT_R", DFSDM_CHANNEL_SPI_CLOCK_INTERNAL_DIV2_RISING },
+	{},
+};
+
+static int stm32_dfsdm_str2val(const char *str,
+			       const struct stm32_dfsdm_str2field *list)
+{
+	const struct stm32_dfsdm_str2field *p = list;
+
+	for (p = list; p && p->name; p++)
+		if (!strcmp(p->name, str))
+			return p->val;
+
+	return -EINVAL;
+}
+
+static int stm32_dfsdm_set_osrs(struct stm32_dfsdm_filter *fl,
+				unsigned int fast, unsigned int oversamp)
+{
+	unsigned int i, d, fosr, iosr;
+	u64 res;
+	s64 delta;
+	unsigned int m = 1;	/* multiplication factor */
+	unsigned int p = fl->ford;	/* filter order (ford) */
+
+	pr_debug("%s: Requested oversampling: %d\n",  __func__, oversamp);
+	/*
+	 * This function tries to compute filter oversampling and integrator
+	 * oversampling, base on oversampling ratio requested by user.
+	 *
+	 * Decimation d depends on the filter order and the oversampling ratios.
+	 * ford: filter order
+	 * fosr: filter over sampling ratio
+	 * iosr: integrator over sampling ratio
+	 */
+	if (fl->ford == DFSDM_FASTSINC_ORDER) {
+		m = 2;
+		p = 2;
+	}
+
+	/*
+	 * Look for filter and integrator oversampling ratios which allows
+	 * to reach 24 bits data output resolution.
+	 * Leave as soon as if exact resolution if reached.
+	 * Otherwise the higher resolution below 32 bits is kept.
+	 */
+	for (fosr = 1; fosr <= DFSDM_MAX_FL_OVERSAMPLING; fosr++) {
+		for (iosr = 1; iosr <= DFSDM_MAX_INT_OVERSAMPLING; iosr++) {
+			if (fast)
+				d = fosr * iosr;
+			else if (fl->ford == DFSDM_FASTSINC_ORDER)
+				d = fosr * (iosr + 3) + 2;
+			else
+				d = fosr * (iosr - 1 + p) + p;
+
+			if (d > oversamp)
+				break;
+			else if (d != oversamp)
+				continue;
+			/*
+			 * Check resolution (limited to signed 32 bits)
+			 *   res <= 2^31
+			 * Sincx filters:
+			 *   res = m * fosr^p x iosr (with m=1, p=ford)
+			 * FastSinc filter
+			 *   res = m * fosr^p x iosr (with m=2, p=2)
+			 */
+			res = fosr;
+			for (i = p - 1; i > 0; i--) {
+				res = res * (u64)fosr;
+				if (res > DFSDM_MAX_RES)
+					break;
+			}
+			if (res > DFSDM_MAX_RES)
+				continue;
+			res = res * (u64)m * (u64)iosr;
+			if (res > DFSDM_MAX_RES)
+				continue;
+
+			delta = res - DFSDM_DATA_RES;
+
+			if (res >= fl->res) {
+				fl->res = res;
+				fl->fosr = fosr;
+				fl->iosr = iosr;
+				fl->fast = fast;
+				pr_debug("%s: fosr = %d, iosr = %d\n",
+					 __func__, fl->fosr, fl->iosr);
+			}
+
+			if (!delta)
+				return 0;
+		}
+	}
+
+	if (!fl->fosr)
+		return -EINVAL;
+
+	return 0;
+}
+
+static int stm32_dfsdm_start_channel(struct stm32_dfsdm *dfsdm,
+				     unsigned int ch_id)
+{
+	return regmap_update_bits(dfsdm->regmap, DFSDM_CHCFGR1(ch_id),
+				  DFSDM_CHCFGR1_CHEN_MASK,
+				  DFSDM_CHCFGR1_CHEN(1));
+}
+
+static void stm32_dfsdm_stop_channel(struct stm32_dfsdm *dfsdm,
+				     unsigned int ch_id)
+{
+	regmap_update_bits(dfsdm->regmap, DFSDM_CHCFGR1(ch_id),
+			   DFSDM_CHCFGR1_CHEN_MASK, DFSDM_CHCFGR1_CHEN(0));
+}
+
+static int stm32_dfsdm_chan_configure(struct stm32_dfsdm *dfsdm,
+				      struct stm32_dfsdm_channel *ch)
+{
+	unsigned int id = ch->id;
+	struct regmap *regmap = dfsdm->regmap;
+	int ret;
+
+	ret = regmap_update_bits(regmap, DFSDM_CHCFGR1(id),
+				 DFSDM_CHCFGR1_SITP_MASK,
+				 DFSDM_CHCFGR1_SITP(ch->type));
+	if (ret < 0)
+		return ret;
+	ret = regmap_update_bits(regmap, DFSDM_CHCFGR1(id),
+				 DFSDM_CHCFGR1_SPICKSEL_MASK,
+				 DFSDM_CHCFGR1_SPICKSEL(ch->src));
+	if (ret < 0)
+		return ret;
+	return regmap_update_bits(regmap, DFSDM_CHCFGR1(id),
+				  DFSDM_CHCFGR1_CHINSEL_MASK,
+				  DFSDM_CHCFGR1_CHINSEL(ch->alt_si));
+}
+
+static int stm32_dfsdm_start_filter(struct stm32_dfsdm *dfsdm,
+				    unsigned int fl_id)
+{
+	int ret;
+
+	/* Enable filter */
+	ret = regmap_update_bits(dfsdm->regmap, DFSDM_CR1(fl_id),
+				 DFSDM_CR1_DFEN_MASK, DFSDM_CR1_DFEN(1));
+	if (ret < 0)
+		return ret;
+
+	/* Start conversion */
+	return regmap_update_bits(dfsdm->regmap, DFSDM_CR1(fl_id),
+				  DFSDM_CR1_RSWSTART_MASK,
+				  DFSDM_CR1_RSWSTART(1));
+}
+
+void stm32_dfsdm_stop_filter(struct stm32_dfsdm *dfsdm, unsigned int fl_id)
+{
+	/* Disable conversion */
+	regmap_update_bits(dfsdm->regmap, DFSDM_CR1(fl_id),
+			   DFSDM_CR1_DFEN_MASK, DFSDM_CR1_DFEN(0));
+}
+
+static int stm32_dfsdm_filter_configure(struct stm32_dfsdm *dfsdm,
+					unsigned int fl_id, unsigned int ch_id)
+{
+	struct regmap *regmap = dfsdm->regmap;
+	struct stm32_dfsdm_filter *fl = &dfsdm->fl_list[fl_id];
+	int ret;
+
+	/* Average integrator oversampling */
+	ret = regmap_update_bits(regmap, DFSDM_FCR(fl_id), DFSDM_FCR_IOSR_MASK,
+				 DFSDM_FCR_IOSR(fl->iosr - 1));
+	if (ret)
+		return ret;
+
+	/* Filter order and Oversampling */
+	ret = regmap_update_bits(regmap, DFSDM_FCR(fl_id), DFSDM_FCR_FOSR_MASK,
+				 DFSDM_FCR_FOSR(fl->fosr - 1));
+	if (ret)
+		return ret;
+
+	ret = regmap_update_bits(regmap, DFSDM_FCR(fl_id), DFSDM_FCR_FORD_MASK,
+				 DFSDM_FCR_FORD(fl->ford));
+	if (ret)
+		return ret;
+
+	/* No scan mode supported for the moment */
+	ret = regmap_update_bits(regmap, DFSDM_CR1(fl_id), DFSDM_CR1_RCH_MASK,
+				 DFSDM_CR1_RCH(ch_id));
+	if (ret)
+		return ret;
+
+	return regmap_update_bits(regmap, DFSDM_CR1(fl_id),
+				  DFSDM_CR1_RSYNC_MASK,
+				  DFSDM_CR1_RSYNC(fl->sync_mode));
+}
+
+int stm32_dfsdm_channel_parse_of(struct stm32_dfsdm *dfsdm,
+				 struct iio_dev *indio_dev,
+				 struct iio_chan_spec *ch)
+{
+	struct stm32_dfsdm_channel *df_ch;
+	const char *of_str;
+	int chan_idx = ch->scan_index;
+	int ret, val;
+
+	ret = of_property_read_u32_index(indio_dev->dev.of_node,
+					 "st,adc-channels", chan_idx,
+					 &ch->channel);
+	if (ret < 0) {
+		dev_err(&indio_dev->dev,
+			" Error parsing 'st,adc-channels' for idx %d\n",
+			chan_idx);
+		return ret;
+	}
+	if (ch->channel >= dfsdm->num_chs) {
+		dev_err(&indio_dev->dev,
+			" Error bad channel number %d (max = %d)\n",
+			ch->channel, dfsdm->num_chs);
+		return -EINVAL;
+	}
+
+	ret = of_property_read_string_index(indio_dev->dev.of_node,
+					    "st,adc-channel-names", chan_idx,
+					    &ch->datasheet_name);
+	if (ret < 0) {
+		dev_err(&indio_dev->dev,
+			" Error parsing 'st,adc-channel-names' for idx %d\n",
+			chan_idx);
+		return ret;
+	}
+
+	df_ch =  &dfsdm->ch_list[ch->channel];
+	df_ch->id = ch->channel;
+
+	ret = of_property_read_string_index(indio_dev->dev.of_node,
+					    "st,adc-channel-types", chan_idx,
+					    &of_str);
+	if (!ret) {
+		val  = stm32_dfsdm_str2val(of_str, stm32_dfsdm_chan_type);
+		if (val < 0)
+			return val;
+	} else {
+		val = 0;
+	}
+	df_ch->type = val;
+
+	ret = of_property_read_string_index(indio_dev->dev.of_node,
+					    "st,adc-channel-clk-src", chan_idx,
+					    &of_str);
+	if (!ret) {
+		val  = stm32_dfsdm_str2val(of_str, stm32_dfsdm_chan_src);
+		if (val < 0)
+			return val;
+	} else {
+		val = 0;
+	}
+	df_ch->src = val;
+
+	ret = of_property_read_u32_index(indio_dev->dev.of_node,
+					 "st,adc-alt-channel", chan_idx,
+					 &df_ch->alt_si);
+	if (ret < 0)
+		df_ch->alt_si = 0;
+
+	return 0;
+}
+
+static int stm32_dfsdm_start_conv(struct stm32_dfsdm_adc *adc, bool dma)
+{
+	struct regmap *regmap = adc->dfsdm->regmap;
+	int ret;
+
+	ret = stm32_dfsdm_start_channel(adc->dfsdm, adc->ch_id);
+	if (ret < 0)
+		return ret;
+
+	ret = stm32_dfsdm_filter_configure(adc->dfsdm, adc->fl_id,
+					   adc->ch_id);
+	if (ret < 0)
+		goto stop_channels;
+
+	ret = stm32_dfsdm_start_filter(adc->dfsdm, adc->fl_id);
+	if (ret < 0)
+		goto stop_channels;
+
+	return 0;
+
+stop_channels:
+	regmap_update_bits(regmap, DFSDM_CR1(adc->fl_id),
+			   DFSDM_CR1_RDMAEN_MASK, 0);
+
+	regmap_update_bits(regmap, DFSDM_CR1(adc->fl_id),
+			   DFSDM_CR1_RCONT_MASK, 0);
+	stm32_dfsdm_stop_channel(adc->dfsdm, adc->fl_id);
+
+	return ret;
+}
+
+static void stm32_dfsdm_stop_conv(struct stm32_dfsdm_adc *adc)
+{
+	struct regmap *regmap = adc->dfsdm->regmap;
+
+	stm32_dfsdm_stop_filter(adc->dfsdm, adc->fl_id);
+
+	/* Clean conversion options */
+	regmap_update_bits(regmap, DFSDM_CR1(adc->fl_id),
+			   DFSDM_CR1_RDMAEN_MASK, 0);
+
+	regmap_update_bits(regmap, DFSDM_CR1(adc->fl_id),
+			   DFSDM_CR1_RCONT_MASK, 0);
+
+	stm32_dfsdm_stop_channel(adc->dfsdm, adc->ch_id);
+}
+
+static int stm32_dfsdm_single_conv(struct iio_dev *indio_dev,
+				   const struct iio_chan_spec *chan, int *res)
+{
+	struct stm32_dfsdm_adc *adc = iio_priv(indio_dev);
+	long timeout;
+	int ret;
+
+	reinit_completion(&adc->completion);
+
+	adc->buffer = res;
+
+	ret = stm32_dfsdm_start_dfsdm(adc->dfsdm);
+	if (ret < 0)
+		return ret;
+
+	ret = regmap_update_bits(adc->dfsdm->regmap, DFSDM_CR2(adc->fl_id),
+				 DFSDM_CR2_REOCIE_MASK, DFSDM_CR2_REOCIE(1));
+	if (ret < 0)
+		goto stop_dfsdm;
+
+	ret = stm32_dfsdm_start_conv(adc, false);
+	if (ret < 0) {
+		regmap_update_bits(adc->dfsdm->regmap, DFSDM_CR2(adc->fl_id),
+				   DFSDM_CR2_REOCIE_MASK, DFSDM_CR2_REOCIE(0));
+		goto stop_dfsdm;
+	}
+
+	timeout = wait_for_completion_interruptible_timeout(&adc->completion,
+							    DFSDM_TIMEOUT);
+
+	/* Mask IRQ for regular conversion achievement*/
+	regmap_update_bits(adc->dfsdm->regmap, DFSDM_CR2(adc->fl_id),
+			   DFSDM_CR2_REOCIE_MASK, DFSDM_CR2_REOCIE(0));
+
+	if (timeout == 0)
+		ret = -ETIMEDOUT;
+	else if (timeout < 0)
+		ret = timeout;
+	else
+		ret = IIO_VAL_INT;
+
+	stm32_dfsdm_stop_conv(adc);
+
+stop_dfsdm:
+	stm32_dfsdm_stop_dfsdm(adc->dfsdm);
+
+	return ret;
+}
+
+static int stm32_dfsdm_write_raw(struct iio_dev *indio_dev,
+				 struct iio_chan_spec const *chan,
+				 int val, int val2, long mask)
+{
+	struct stm32_dfsdm_adc *adc = iio_priv(indio_dev);
+	struct stm32_dfsdm_filter *fl = &adc->dfsdm->fl_list[adc->fl_id];
+	int ret = -EINVAL;
+
+	if (mask == IIO_CHAN_INFO_OVERSAMPLING_RATIO) {
+		ret = stm32_dfsdm_set_osrs(fl, 0, val);
+		if (!ret)
+			adc->oversamp = val;
+	}
+
+	return ret;
+}
+
+static int stm32_dfsdm_read_raw(struct iio_dev *indio_dev,
+				struct iio_chan_spec const *chan, int *val,
+				int *val2, long mask)
+{
+	struct stm32_dfsdm_adc *adc = iio_priv(indio_dev);
+	int ret;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_RAW:
+		ret = iio_hw_consumer_enable(adc->hwc);
+		if (ret < 0) {
+			dev_err(&indio_dev->dev,
+				"%s: IIO enable failed (channel %d)\n",
+				__func__, chan->channel);
+			return ret;
+		}
+		ret = stm32_dfsdm_single_conv(indio_dev, chan, val);
+		iio_hw_consumer_disable(adc->hwc);
+		if (ret < 0) {
+			dev_err(&indio_dev->dev,
+				"%s: Conversion failed (channel %d)\n",
+				__func__, chan->channel);
+			return ret;
+		}
+		return IIO_VAL_INT;
+
+	case IIO_CHAN_INFO_OVERSAMPLING_RATIO:
+		*val = adc->oversamp;
+
+		return IIO_VAL_INT;
+	}
+
+	return -EINVAL;
+}
+
+static const struct iio_info stm32_dfsdm_info_adc = {
+	.read_raw = stm32_dfsdm_read_raw,
+	.write_raw = stm32_dfsdm_write_raw,
+};
+
+static irqreturn_t stm32_dfsdm_irq(int irq, void *arg)
+{
+	struct stm32_dfsdm_adc *adc = arg;
+	struct iio_dev *indio_dev = iio_priv_to_dev(adc);
+	struct regmap *regmap = adc->dfsdm->regmap;
+	unsigned int status, int_en;
+
+	regmap_read(regmap, DFSDM_ISR(adc->fl_id), &status);
+	regmap_read(regmap, DFSDM_CR2(adc->fl_id), &int_en);
+
+	if (status & DFSDM_ISR_REOCF_MASK) {
+		/* Read the data register clean the IRQ status */
+		regmap_read(regmap, DFSDM_RDATAR(adc->fl_id), adc->buffer);
+		complete(&adc->completion);
+	}
+
+	if (status & DFSDM_ISR_ROVRF_MASK) {
+		if (int_en & DFSDM_CR2_ROVRIE_MASK)
+			dev_warn(&indio_dev->dev, "Overrun detected\n");
+		regmap_update_bits(regmap, DFSDM_ICR(adc->fl_id),
+				   DFSDM_ICR_CLRROVRF_MASK,
+				   DFSDM_ICR_CLRROVRF_MASK);
+	}
+
+	return IRQ_HANDLED;
+}
+
+static int stm32_dfsdm_adc_chan_init_one(struct iio_dev *indio_dev,
+					 struct iio_chan_spec *ch)
+{
+	struct stm32_dfsdm_adc *adc = iio_priv(indio_dev);
+	int ret;
+
+	ret = stm32_dfsdm_channel_parse_of(adc->dfsdm, indio_dev, ch);
+	if (ret < 0)
+		return ret;
+
+	ch->type = IIO_VOLTAGE;
+	ch->indexed = 1;
+
+	/*
+	 * IIO_CHAN_INFO_RAW: used to compute regular conversion
+	 * IIO_CHAN_INFO_OVERSAMPLING_RATIO: used to set oversampling
+	 */
+	ch->info_mask_separate = BIT(IIO_CHAN_INFO_RAW);
+	ch->info_mask_shared_by_all = BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO);
+
+	ch->scan_type.sign = 'u';
+	ch->scan_type.realbits = 24;
+	ch->scan_type.storagebits = 32;
+	adc->ch_id = ch->channel;
+
+	return stm32_dfsdm_chan_configure(adc->dfsdm,
+					  &adc->dfsdm->ch_list[ch->channel]);
+}
+
+static int stm32_dfsdm_adc_init(struct iio_dev *indio_dev)
+{
+	struct iio_chan_spec *ch;
+	struct stm32_dfsdm_adc *adc = iio_priv(indio_dev);
+	int num_ch;
+	int ret, chan_idx;
+
+	adc->oversamp = DFSDM_DEFAULT_OVERSAMPLING;
+	ret = stm32_dfsdm_set_osrs(&adc->dfsdm->fl_list[adc->fl_id], 0,
+				   adc->oversamp);
+	if (ret < 0)
+		return ret;
+
+	num_ch = of_property_count_u32_elems(indio_dev->dev.of_node,
+					     "st,adc-channels");
+	if (num_ch < 0 || num_ch > adc->dfsdm->num_chs) {
+		dev_err(&indio_dev->dev, "Bad st,adc-channels\n");
+		return num_ch < 0 ? num_ch : -EINVAL;
+	}
+
+	/* Bind to SD modulator IIO device */
+	adc->hwc = devm_iio_hw_consumer_alloc(&indio_dev->dev);
+	if (IS_ERR(adc->hwc))
+		return -EPROBE_DEFER;
+
+	ch = devm_kcalloc(&indio_dev->dev, num_ch, sizeof(*ch),
+			  GFP_KERNEL);
+	if (!ch)
+		return -ENOMEM;
+
+	for (chan_idx = 0; chan_idx < num_ch; chan_idx++) {
+		ch->scan_index = chan_idx;
+		ret = stm32_dfsdm_adc_chan_init_one(indio_dev, ch);
+		if (ret < 0) {
+			dev_err(&indio_dev->dev, "Channels init failed\n");
+			return ret;
+		}
+	}
+
+	indio_dev->num_channels = num_ch;
+	indio_dev->channels = ch;
+
+	init_completion(&adc->completion);
+
+	return 0;
+}
+
+static const struct stm32_dfsdm_dev_data stm32h7_dfsdm_adc_data = {
+	.type = DFSDM_IIO,
+	.init = stm32_dfsdm_adc_init,
+};
+
+static const struct of_device_id stm32_dfsdm_adc_match[] = {
+	{ .compatible = "st,stm32-dfsdm-adc",
+		.data = &stm32h7_dfsdm_adc_data,
+	},
+	{}
+};
+
+static int stm32_dfsdm_adc_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct stm32_dfsdm_adc *adc;
+	struct device_node *np = dev->of_node;
+	const struct stm32_dfsdm_dev_data *dev_data;
+	struct iio_dev *iio;
+	const struct of_device_id *of_id;
+	char *name;
+	int ret, irq, val;
+
+	of_id = of_match_node(stm32_dfsdm_adc_match, np);
+	if (!of_id->data) {
+		dev_err(&pdev->dev, "Data associated to device is missing\n");
+		return -EINVAL;
+	}
+
+	dev_data = (const struct stm32_dfsdm_dev_data *)of_id->data;
+
+	iio = devm_iio_device_alloc(dev, sizeof(*adc));
+	if (IS_ERR(iio)) {
+		dev_err(dev, "%s: Failed to allocate IIO\n", __func__);
+		return PTR_ERR(iio);
+	}
+
+	adc = iio_priv(iio);
+	if (IS_ERR(adc)) {
+		dev_err(dev, "%s: Failed to allocate ADC\n", __func__);
+		return PTR_ERR(adc);
+	}
+	adc->dfsdm = dev_get_drvdata(dev->parent);
+
+	iio->dev.parent = dev;
+	iio->dev.of_node = np;
+	iio->modes = INDIO_DIRECT_MODE | INDIO_BUFFER_SOFTWARE;
+
+	platform_set_drvdata(pdev, adc);
+
+	ret = of_property_read_u32(dev->of_node, "reg", &adc->fl_id);
+	if (ret != 0) {
+		dev_err(dev, "Missing reg property\n");
+		return -EINVAL;
+	}
+
+	name = devm_kzalloc(dev, sizeof("dfsdm-adc0"), GFP_KERNEL);
+	if (!name)
+		return -ENOMEM;
+	iio->info = &stm32_dfsdm_info_adc;
+	snprintf(name, sizeof("dfsdm-adc0"), "dfsdm-adc%d", adc->fl_id);
+	iio->name = name;
+
+	/*
+	 * In a first step IRQs generated for channels are not treated.
+	 * So IRQ associated to filter instance 0 is dedicated to the Filter 0.
+	 */
+	irq = platform_get_irq(pdev, 0);
+	ret = devm_request_irq(dev, irq, stm32_dfsdm_irq,
+			       0, pdev->name, adc);
+	if (ret < 0) {
+		dev_err(dev, "Failed to request IRQ\n");
+		return ret;
+	}
+
+	ret = of_property_read_u32(dev->of_node, "st,filter-order", &val);
+	if (ret < 0) {
+		dev_err(dev, "Failed to set filter order\n");
+		return ret;
+	}
+
+	adc->dfsdm->fl_list[adc->fl_id].ford = val;
+
+	ret = of_property_read_u32(dev->of_node, "st,filter0-sync", &val);
+	if (!ret)
+		adc->dfsdm->fl_list[adc->fl_id].sync_mode = val;
+
+	adc->dev_data = dev_data;
+	ret = dev_data->init(iio);
+	if (ret < 0)
+		return ret;
+
+	return iio_device_register(iio);
+}
+
+static int stm32_dfsdm_adc_remove(struct platform_device *pdev)
+{
+	struct stm32_dfsdm_adc *adc = platform_get_drvdata(pdev);
+	struct iio_dev *indio_dev = iio_priv_to_dev(adc);
+
+	iio_device_unregister(indio_dev);
+
+	return 0;
+}
+
+static struct platform_driver stm32_dfsdm_adc_driver = {
+	.driver = {
+		.name = "stm32-dfsdm-adc",
+		.of_match_table = stm32_dfsdm_adc_match,
+	},
+	.probe = stm32_dfsdm_adc_probe,
+	.remove = stm32_dfsdm_adc_remove,
+
+};
+module_platform_driver(stm32_dfsdm_adc_driver);
+
+MODULE_DESCRIPTION("STM32 sigma delta ADC");
+MODULE_AUTHOR("Arnaud Pouliquen <arnaud.pouliquen-qxv4g6HH51o@public.gmane.org>");
+MODULE_LICENSE("GPL v2");
-- 
2.7.4

[PATCH v5 10/13] IIO: ADC: add stm32 DFSDM support for PDM microphone

[Arnaud Pouliquen]

This code offers a way to handle PDM audio microphones in
ASOC framework. Audio driver should use consumer API.
A specific management is implemented for DMA, with a
callback, to allows to handle audio buffers efficiently.

Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen-qxv4g6HH51o@public.gmane.org>
---
V4 -> V5: 
 - Add devm_of_platform_populate to probe ASOC DAI device
 - replace ext info "audio_sampling_rate" by IIO_CHAN_INFO_SAMP_FREQ attribute.
 - Minor fixes based on Jonathan comments

 .../ABI/testing/sysfs-bus-iio-dfsdm-adc-stm32      |  16 +
 drivers/iio/adc/stm32-dfsdm-adc.c                  | 507 ++++++++++++++++++++-
 include/linux/iio/adc/stm32-dfsdm-adc.h            |  28 ++
 3 files changed, 543 insertions(+), 8 deletions(-)
 create mode 100644 Documentation/ABI/testing/sysfs-bus-iio-dfsdm-adc-stm32
 create mode 100644 include/linux/iio/adc/stm32-dfsdm-adc.h

diff --git a/Documentation/ABI/testing/sysfs-bus-iio-dfsdm-adc-stm32 b/Documentation/ABI/testing/sysfs-bus-iio-dfsdm-adc-stm32
new file mode 100644
index 0000000..da98223
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-bus-iio-dfsdm-adc-stm32
@@ -0,0 +1,16 @@
+What:		/sys/bus/iio/devices/iio:deviceX/in_voltage_spi_clk_freq
+KernelVersion:	4.14
+Contact:	arnaud.pouliquen-qxv4g6HH51o@public.gmane.org
+Description:
+		For audio purpose only.
+		Used by audio driver to set/get the spi input frequency.
+		This is mandatory if DFSDM is slave on SPI bus, to
+		provide information on the SPI clock frequency during runtime
+		Notice that the SPI frequency should be a multiple of sample
+		frequency to ensure the precision.
+		if DFSDM input is SPI master
+			Reading  SPI clkout frequency,
+			error on writing
+		If DFSDM input is SPI Slave:
+			Reading returns value previously set.
+			Writing value before starting conversions.
\ No newline at end of file
diff --git a/drivers/iio/adc/stm32-dfsdm-adc.c b/drivers/iio/adc/stm32-dfsdm-adc.c
index f9419ab..80b0ca7 100644
--- a/drivers/iio/adc/stm32-dfsdm-adc.c
+++ b/drivers/iio/adc/stm32-dfsdm-adc.c
@@ -19,19 +19,25 @@
  * this program. If not, see <http://www.gnu.org/licenses/>.
  */
 
+#include <linux/dmaengine.h>
+#include <linux/dma-mapping.h>
 #include <linux/interrupt.h>
 #include <linux/iio/buffer.h>
 #include <linux/iio/hw-consumer.h>
 #include <linux/iio/iio.h>
 #include <linux/iio/sysfs.h>
+#include <linux/iio/trigger_consumer.h>
+#include <linux/iio/triggered_buffer.h>
 #include <linux/module.h>
-#include <linux/of.h>
+#include <linux/of_device.h>
 #include <linux/platform_device.h>
 #include <linux/regmap.h>
 #include <linux/slab.h>
 
 #include "stm32-dfsdm.h"
 
+#define DFSDM_DMA_BUFFER_SIZE (4 * PAGE_SIZE)
+
 /* Conversion timeout */
 #define DFSDM_TIMEOUT_US 100000
 #define DFSDM_TIMEOUT (msecs_to_jiffies(DFSDM_TIMEOUT_US / 1000))
@@ -71,6 +77,18 @@ struct stm32_dfsdm_adc {
 	struct completion completion;
 	u32 *buffer;
 
+	/* Audio specific */
+	unsigned int spi_freq;  /* SPI bus clock frequency */
+	unsigned int sample_freq; /* Sample frequency after filter decimation */
+	int (*cb)(const void *data, size_t size, void *cb_priv);
+	void *cb_priv;
+
+	/* DMA */
+	u8 *rx_buf;
+	unsigned int bufi; /* Buffer current position */
+	unsigned int buf_sz; /* Buffer size */
+	struct dma_chan	*dma_chan;
+	dma_addr_t dma_buf;
 };
 
 struct stm32_dfsdm_str2field {
@@ -364,10 +382,63 @@ int stm32_dfsdm_channel_parse_of(struct stm32_dfsdm *dfsdm,
 	return 0;
 }
 
+static ssize_t dfsdm_adc_audio_get_spiclk(struct iio_dev *indio_dev,
+					  uintptr_t priv,
+					  const struct iio_chan_spec *chan,
+					  char *buf)
+{
+	struct stm32_dfsdm_adc *adc = iio_priv(indio_dev);
+
+	return snprintf(buf, PAGE_SIZE, "%d\n", adc->spi_freq);
+}
+
+static ssize_t dfsdm_adc_audio_set_spiclk(struct iio_dev *indio_dev,
+					  uintptr_t priv,
+					  const struct iio_chan_spec *chan,
+					  const char *buf, size_t len)
+{
+	struct stm32_dfsdm_adc *adc = iio_priv(indio_dev);
+	struct stm32_dfsdm_filter *fl = &adc->dfsdm->fl_list[adc->fl_id];
+	struct stm32_dfsdm_channel *ch = &adc->dfsdm->ch_list[adc->ch_id];
+	unsigned int sample_freq = adc->sample_freq;
+	unsigned int spi_freq;
+	int ret;
+
+	dev_err(&indio_dev->dev, "enter %s\n", __func__);
+	/* If DFSDM is master on SPI, SPI freq can not be updated */
+	if (ch->src != DFSDM_CHANNEL_SPI_CLOCK_EXTERNAL)
+		return -EPERM;
+
+	ret = kstrtoint(buf, 0, &spi_freq);
+	if (ret)
+		return ret;
+
+	if (!spi_freq)
+		return -EINVAL;
+
+	if (sample_freq) {
+		if (spi_freq % sample_freq)
+			dev_warn(&indio_dev->dev,
+				 "Sampling rate not accurate (%d)\n",
+				 spi_freq / (spi_freq / sample_freq));
+
+		ret = stm32_dfsdm_set_osrs(fl, 0, (spi_freq / sample_freq));
+		if (ret < 0) {
+			dev_err(&indio_dev->dev,
+				"No filter parameters that match!\n");
+			return ret;
+		}
+	}
+	adc->spi_freq = spi_freq;
+
+	return len;
+}
+
 static int stm32_dfsdm_start_conv(struct stm32_dfsdm_adc *adc, bool dma)
 {
 	struct regmap *regmap = adc->dfsdm->regmap;
 	int ret;
+	unsigned int dma_en = 0, cont_en = 0;
 
 	ret = stm32_dfsdm_start_channel(adc->dfsdm, adc->ch_id);
 	if (ret < 0)
@@ -378,6 +449,24 @@ static int stm32_dfsdm_start_conv(struct stm32_dfsdm_adc *adc, bool dma)
 	if (ret < 0)
 		goto stop_channels;
 
+	if (dma) {
+		/* Enable DMA transfer*/
+		dma_en =  DFSDM_CR1_RDMAEN(1);
+		/* Enable conversion triggered by SPI clock*/
+		cont_en = DFSDM_CR1_RCONT(1);
+	}
+	/* Enable DMA transfer*/
+	ret = regmap_update_bits(regmap, DFSDM_CR1(adc->fl_id),
+				 DFSDM_CR1_RDMAEN_MASK, dma_en);
+	if (ret < 0)
+		goto stop_channels;
+
+	/* Enable conversion triggered by SPI clock*/
+	ret = regmap_update_bits(regmap, DFSDM_CR1(adc->fl_id),
+				 DFSDM_CR1_RCONT_MASK, cont_en);
+	if (ret < 0)
+		goto stop_channels;
+
 	ret = stm32_dfsdm_start_filter(adc->dfsdm, adc->fl_id);
 	if (ret < 0)
 		goto stop_channels;
@@ -411,6 +500,231 @@ static void stm32_dfsdm_stop_conv(struct stm32_dfsdm_adc *adc)
 	stm32_dfsdm_stop_channel(adc->dfsdm, adc->ch_id);
 }
 
+static int stm32_dfsdm_set_watermark(struct iio_dev *indio_dev,
+				     unsigned int val)
+{
+	struct stm32_dfsdm_adc *adc = iio_priv(indio_dev);
+	unsigned int watermark = DFSDM_DMA_BUFFER_SIZE / 2;
+
+	/*
+	 * DMA cyclic transfers are used, buffer is split into two periods.
+	 * There should be :
+	 * - always one buffer (period) DMA is working on
+	 * - one buffer (period) driver pushed to ASoC side.
+	 */
+	watermark = min(watermark, val * (unsigned int)(sizeof(u32)));
+	adc->buf_sz = watermark * 2;
+
+	return 0;
+}
+
+static unsigned int stm32_dfsdm_adc_dma_residue(struct stm32_dfsdm_adc *adc)
+{
+	struct dma_tx_state state;
+	enum dma_status status;
+
+	status = dmaengine_tx_status(adc->dma_chan,
+				     adc->dma_chan->cookie,
+				     &state);
+	if (status == DMA_IN_PROGRESS) {
+		/* Residue is size in bytes from end of buffer */
+		unsigned int i = adc->buf_sz - state.residue;
+		unsigned int size;
+
+		/* Return available bytes */
+		if (i >= adc->bufi)
+			size = i - adc->bufi;
+		else
+			size = adc->buf_sz + i - adc->bufi;
+
+		return size;
+	}
+
+	return 0;
+}
+
+static void stm32_dfsdm_audio_dma_buffer_done(void *data)
+{
+	struct iio_dev *indio_dev = data;
+	struct stm32_dfsdm_adc *adc = iio_priv(indio_dev);
+	int available = stm32_dfsdm_adc_dma_residue(adc);
+	size_t old_pos;
+
+	/*
+	 * FIXME: In Kernel interface does not support cyclic DMA buffer,and
+	 * offers only an interface to push data samples per samples.
+	 * For this reason IIO buffer interface is not used and interface is
+	 * bypassed using a private callback registered by ASoC.
+	 * This should be a temporary solution waiting a cyclic DMA engine
+	 * support in IIO.
+	 */
+
+	dev_dbg(&indio_dev->dev, "%s: pos = %d, available = %d\n", __func__,
+		adc->bufi, available);
+	old_pos = adc->bufi;
+
+	while (available >= indio_dev->scan_bytes) {
+		u32 *buffer = (u32 *)&adc->rx_buf[adc->bufi];
+
+		/* Mask 8 LSB that contains the channel ID */
+		*buffer = (*buffer & 0xFFFFFF00) << 8;
+		available -= indio_dev->scan_bytes;
+		adc->bufi += indio_dev->scan_bytes;
+		if (adc->bufi >= adc->buf_sz) {
+			if (adc->cb)
+				adc->cb(&adc->rx_buf[old_pos],
+					 adc->buf_sz - old_pos, adc->cb_priv);
+			adc->bufi = 0;
+			old_pos = 0;
+		}
+	}
+	if (adc->cb)
+		adc->cb(&adc->rx_buf[old_pos], adc->bufi - old_pos,
+				adc->cb_priv);
+}
+
+static int stm32_dfsdm_adc_dma_start(struct iio_dev *indio_dev)
+{
+	struct stm32_dfsdm_adc *adc = iio_priv(indio_dev);
+	struct dma_async_tx_descriptor *desc;
+	dma_cookie_t cookie;
+	int ret;
+
+	if (!adc->dma_chan)
+		return -EINVAL;
+
+	dev_dbg(&indio_dev->dev, "%s size=%d watermark=%d\n", __func__,
+		adc->buf_sz, adc->buf_sz / 2);
+
+	/* Prepare a DMA cyclic transaction */
+	desc = dmaengine_prep_dma_cyclic(adc->dma_chan,
+					 adc->dma_buf,
+					 adc->buf_sz, adc->buf_sz / 2,
+					 DMA_DEV_TO_MEM,
+					 DMA_PREP_INTERRUPT);
+	if (!desc)
+		return -EBUSY;
+
+	desc->callback = stm32_dfsdm_audio_dma_buffer_done;
+	desc->callback_param = indio_dev;
+
+	cookie = dmaengine_submit(desc);
+	ret = dma_submit_error(cookie);
+	if (ret) {
+		dmaengine_terminate_all(adc->dma_chan);
+		return ret;
+	}
+
+	/* Issue pending DMA requests */
+	dma_async_issue_pending(adc->dma_chan);
+
+	return 0;
+}
+
+static int stm32_dfsdm_postenable(struct iio_dev *indio_dev)
+{
+	struct stm32_dfsdm_adc *adc = iio_priv(indio_dev);
+	int ret;
+
+	/* Reset adc buffer index */
+	adc->bufi = 0;
+
+	ret = stm32_dfsdm_start_dfsdm(adc->dfsdm);
+	if (ret < 0)
+		return ret;
+
+	ret = stm32_dfsdm_start_conv(adc, true);
+	if (ret) {
+		dev_err(&indio_dev->dev, "Can't start conversion\n");
+		goto stop_dfsdm;
+	}
+
+	if (adc->dma_chan) {
+		ret = stm32_dfsdm_adc_dma_start(indio_dev);
+		if (ret) {
+			dev_err(&indio_dev->dev, "Can't start DMA\n");
+			goto err_stop_conv;
+		}
+	}
+
+	return 0;
+
+err_stop_conv:
+	stm32_dfsdm_stop_conv(adc);
+stop_dfsdm:
+	stm32_dfsdm_stop_dfsdm(adc->dfsdm);
+
+	return ret;
+}
+
+static int stm32_dfsdm_predisable(struct iio_dev *indio_dev)
+{
+	struct stm32_dfsdm_adc *adc = iio_priv(indio_dev);
+
+	if (adc->dma_chan)
+		dmaengine_terminate_all(adc->dma_chan);
+
+	stm32_dfsdm_stop_conv(adc);
+
+	stm32_dfsdm_stop_dfsdm(adc->dfsdm);
+
+	return 0;
+}
+
+static const struct iio_buffer_setup_ops stm32_dfsdm_buffer_setup_ops = {
+	.postenable = &stm32_dfsdm_postenable,
+	.predisable = &stm32_dfsdm_predisable,
+};
+
+/**
+ * stm32_dfsdm_get_buff_cb() - register a callback that will be called when
+ *                             DMA transfer period is achieved.
+ *
+ * @iio_dev: Handle to IIO device.
+ * @cb: Pointer to callback function:
+ *      - data: pointer to data buffer
+ *      - size: size in byte of the data buffer
+ *      - private: pointer to consumer private structure.
+ * @private: Pointer to consumer private structure.
+ */
+int stm32_dfsdm_get_buff_cb(struct iio_dev *iio_dev,
+			    int (*cb)(const void *data, size_t size,
+				      void *private),
+			    void *private)
+{
+	struct stm32_dfsdm_adc *adc;
+
+	if (!iio_dev)
+		return -EINVAL;
+	adc = iio_priv(iio_dev);
+
+	adc->cb = cb;
+	adc->cb_priv = private;
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(stm32_dfsdm_get_buff_cb);
+
+/**
+ * stm32_dfsdm_release_buff_cb - unregister buffer callback
+ *
+ * @iio_dev: Handle to IIO device.
+ */
+int stm32_dfsdm_release_buff_cb(struct iio_dev *iio_dev)
+{
+	struct stm32_dfsdm_adc *adc;
+
+	if (!iio_dev)
+		return -EINVAL;
+	adc = iio_priv(iio_dev);
+
+	adc->cb = NULL;
+	adc->cb_priv = NULL;
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(stm32_dfsdm_release_buff_cb);
+
 static int stm32_dfsdm_single_conv(struct iio_dev *indio_dev,
 				   const struct iio_chan_spec *chan, int *res)
 {
@@ -466,15 +780,41 @@ static int stm32_dfsdm_write_raw(struct iio_dev *indio_dev,
 {
 	struct stm32_dfsdm_adc *adc = iio_priv(indio_dev);
 	struct stm32_dfsdm_filter *fl = &adc->dfsdm->fl_list[adc->fl_id];
+	struct stm32_dfsdm_channel *ch = &adc->dfsdm->ch_list[adc->ch_id];
+	unsigned int spi_freq = adc->spi_freq;
 	int ret = -EINVAL;
 
-	if (mask == IIO_CHAN_INFO_OVERSAMPLING_RATIO) {
+	switch (mask) {
+	case IIO_CHAN_INFO_OVERSAMPLING_RATIO:
 		ret = stm32_dfsdm_set_osrs(fl, 0, val);
 		if (!ret)
 			adc->oversamp = val;
+
+		return ret;
+
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		if (!val)
+			return -EINVAL;
+		if (ch->src != DFSDM_CHANNEL_SPI_CLOCK_EXTERNAL)
+			spi_freq = adc->dfsdm->spi_master_freq;
+
+		if (spi_freq % val)
+			dev_warn(&indio_dev->dev,
+				 "Sampling rate not accurate (%d)\n",
+				 spi_freq / (spi_freq / val));
+
+		ret = stm32_dfsdm_set_osrs(fl, 0, (spi_freq / val));
+		if (ret < 0) {
+			dev_err(&indio_dev->dev,
+				"Not able to find parameter that match!\n");
+			return ret;
+		}
+		adc->sample_freq = val;
+
+		return 0;
 	}
 
-	return ret;
+	return -EINVAL;
 }
 
 static int stm32_dfsdm_read_raw(struct iio_dev *indio_dev,
@@ -507,11 +847,22 @@ static int stm32_dfsdm_read_raw(struct iio_dev *indio_dev,
 		*val = adc->oversamp;
 
 		return IIO_VAL_INT;
+
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		*val = adc->sample_freq;
+
+		return IIO_VAL_INT;
 	}
 
 	return -EINVAL;
 }
 
+static const struct iio_info stm32_dfsdm_info_audio = {
+	.hwfifo_set_watermark = stm32_dfsdm_set_watermark,
+	.read_raw = stm32_dfsdm_read_raw,
+	.write_raw = stm32_dfsdm_write_raw,
+};
+
 static const struct iio_info stm32_dfsdm_info_adc = {
 	.read_raw = stm32_dfsdm_read_raw,
 	.write_raw = stm32_dfsdm_write_raw,
@@ -544,6 +895,60 @@ static irqreturn_t stm32_dfsdm_irq(int irq, void *arg)
 	return IRQ_HANDLED;
 }
 
+/*
+ * Define external info for SPI Frequency and audio sampling rate that can be
+ * configured by ASoC driver through consumer.h API
+ */
+static const struct iio_chan_spec_ext_info dfsdm_adc_audio_ext_info[] = {
+	/* spi_clk_freq : clock freq on SPI/manchester bus used by channel */
+	{
+		.name = "spi_clk_freq",
+		.shared = IIO_SHARED_BY_TYPE,
+		.read = dfsdm_adc_audio_get_spiclk,
+		.write = dfsdm_adc_audio_set_spiclk,
+	},
+	{},
+};
+
+static int stm32_dfsdm_dma_request(struct iio_dev *indio_dev)
+{
+	struct stm32_dfsdm_adc *adc = iio_priv(indio_dev);
+	struct dma_slave_config config;
+	int ret;
+
+	adc->dma_chan = dma_request_slave_channel(&indio_dev->dev, "rx");
+	if (!adc->dma_chan)
+		return -EINVAL;
+
+	adc->rx_buf = dma_alloc_coherent(adc->dma_chan->device->dev,
+					 DFSDM_DMA_BUFFER_SIZE,
+					 &adc->dma_buf, GFP_KERNEL);
+	if (!adc->rx_buf) {
+		ret = -ENOMEM;
+		goto err_release;
+	}
+
+	/* Configure DMA channel to read data register */
+	memset(&config, 0, sizeof(config));
+	config.src_addr = (dma_addr_t)adc->dfsdm->phys_base;
+	config.src_addr += DFSDM_RDATAR(adc->fl_id);
+	config.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
+
+	ret = dmaengine_slave_config(adc->dma_chan, &config);
+	if (ret)
+		goto err_free;
+
+	return 0;
+
+err_free:
+	dma_free_coherent(adc->dma_chan->device->dev, DFSDM_DMA_BUFFER_SIZE,
+			  adc->rx_buf, adc->dma_buf);
+err_release:
+	dma_release_channel(adc->dma_chan);
+
+	return ret;
+}
+
 static int stm32_dfsdm_adc_chan_init_one(struct iio_dev *indio_dev,
 					 struct iio_chan_spec *ch)
 {
@@ -564,7 +969,12 @@ static int stm32_dfsdm_adc_chan_init_one(struct iio_dev *indio_dev,
 	ch->info_mask_separate = BIT(IIO_CHAN_INFO_RAW);
 	ch->info_mask_shared_by_all = BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO);
 
-	ch->scan_type.sign = 'u';
+	if (adc->dev_data->type == DFSDM_AUDIO) {
+		ch->scan_type.sign = 's';
+		ch->ext_info = dfsdm_adc_audio_ext_info;
+	} else {
+		ch->scan_type.sign = 'u';
+	}
 	ch->scan_type.realbits = 24;
 	ch->scan_type.storagebits = 32;
 	adc->ch_id = ch->channel;
@@ -573,6 +983,64 @@ static int stm32_dfsdm_adc_chan_init_one(struct iio_dev *indio_dev,
 					  &adc->dfsdm->ch_list[ch->channel]);
 }
 
+static int stm32_dfsdm_audio_init(struct iio_dev *indio_dev)
+{
+	struct iio_chan_spec *ch;
+	struct stm32_dfsdm_adc *adc = iio_priv(indio_dev);
+	struct stm32_dfsdm_channel *d_ch;
+	int ret;
+
+	ret = stm32_dfsdm_dma_request(indio_dev);
+	if (ret) {
+		dev_err(&indio_dev->dev, "DMA request failed\n");
+		return ret;
+	}
+
+	indio_dev->modes |= INDIO_BUFFER_SOFTWARE;
+
+	ret = iio_triggered_buffer_setup(indio_dev,
+					 &iio_pollfunc_store_time,
+					 NULL,
+					 &stm32_dfsdm_buffer_setup_ops);
+	if (ret) {
+		dev_err(&indio_dev->dev, "Buffer setup failed\n");
+		goto err_dma_disable;
+	}
+
+	ch = devm_kzalloc(&indio_dev->dev, sizeof(*ch), GFP_KERNEL);
+	if (!ch)
+		return -ENOMEM;
+
+	ch->scan_index = 0;
+	ret = stm32_dfsdm_adc_chan_init_one(indio_dev, ch);
+	if (ret < 0) {
+		dev_err(&indio_dev->dev, "channels init failed\n");
+		goto err_buffer_cleanup;
+	}
+	ch->info_mask_separate = BIT(IIO_CHAN_INFO_SAMP_FREQ);
+
+	d_ch = &adc->dfsdm->ch_list[adc->ch_id];
+	if (d_ch->src != DFSDM_CHANNEL_SPI_CLOCK_EXTERNAL)
+		adc->spi_freq = adc->dfsdm->spi_master_freq;
+
+	indio_dev->num_channels = 1;
+	indio_dev->channels = ch;
+
+	return 0;
+
+err_buffer_cleanup:
+	iio_triggered_buffer_cleanup(indio_dev);
+
+err_dma_disable:
+	if (adc->dma_chan) {
+		dma_free_coherent(adc->dma_chan->device->dev,
+				  DFSDM_DMA_BUFFER_SIZE,
+				  adc->rx_buf, adc->dma_buf);
+		dma_release_channel(adc->dma_chan);
+	}
+	return ret;
+}
+
 static int stm32_dfsdm_adc_init(struct iio_dev *indio_dev)
 {
 	struct iio_chan_spec *ch;
@@ -625,10 +1093,18 @@ static const struct stm32_dfsdm_dev_data stm32h7_dfsdm_adc_data = {
 	.init = stm32_dfsdm_adc_init,
 };
 
+static const struct stm32_dfsdm_dev_data stm32h7_dfsdm_audio_data = {
+	.type = DFSDM_AUDIO,
+	.init = stm32_dfsdm_audio_init,
+};
+
 static const struct of_device_id stm32_dfsdm_adc_match[] = {
 	{ .compatible = "st,stm32-dfsdm-adc",
 		.data = &stm32h7_dfsdm_adc_data,
 	},
+	{ .compatible = "st,stm32-dfsdm-dmic",
+		.data = &stm32h7_dfsdm_audio_data,
+	},
 	{}
 };
 
@@ -679,8 +1155,13 @@ static int stm32_dfsdm_adc_probe(struct platform_device *pdev)
 	name = devm_kzalloc(dev, sizeof("dfsdm-adc0"), GFP_KERNEL);
 	if (!name)
 		return -ENOMEM;
-	iio->info = &stm32_dfsdm_info_adc;
-	snprintf(name, sizeof("dfsdm-adc0"), "dfsdm-adc%d", adc->fl_id);
+	if (dev_data->type == DFSDM_AUDIO) {
+		iio->info = &stm32_dfsdm_info_audio;
+		snprintf(name, sizeof("dfsdm-pdm0"), "dfsdm-pdm%d", adc->fl_id);
+	} else {
+		iio->info = &stm32_dfsdm_info_adc;
+		snprintf(name, sizeof("dfsdm-adc0"), "dfsdm-adc%d", adc->fl_id);
+	}
 	iio->name = name;
 
 	/*
@@ -712,7 +1193,10 @@ static int stm32_dfsdm_adc_probe(struct platform_device *pdev)
 	if (ret < 0)
 		return ret;
 
-	return iio_device_register(iio);
+	iio_device_register(iio);
+	if (dev_data->type == DFSDM_AUDIO)
+		return devm_of_platform_populate(&pdev->dev);
+	return 0;
 }
 
 static int stm32_dfsdm_adc_remove(struct platform_device *pdev)
@@ -721,7 +1205,14 @@ static int stm32_dfsdm_adc_remove(struct platform_device *pdev)
 	struct iio_dev *indio_dev = iio_priv_to_dev(adc);
 
 	iio_device_unregister(indio_dev);
-
+	if (indio_dev->pollfunc)
+		iio_triggered_buffer_cleanup(indio_dev);
+	if (adc->dma_chan) {
+		dma_free_coherent(adc->dma_chan->device->dev,
+				  DFSDM_DMA_BUFFER_SIZE,
+				  adc->rx_buf, adc->dma_buf);
+		dma_release_channel(adc->dma_chan);
+	}
 	return 0;
 }
 
diff --git a/include/linux/iio/adc/stm32-dfsdm-adc.h b/include/linux/iio/adc/stm32-dfsdm-adc.h
new file mode 100644
index 0000000..cad7963
--- /dev/null
+++ b/include/linux/iio/adc/stm32-dfsdm-adc.h
@@ -0,0 +1,28 @@
+/*
+ * This file discribe the STM32 DFSDM IIO driver API for audio part
+ *
+ * Copyright (C) 2017, STMicroelectronics - All Rights Reserved
+ * Author(s): Arnaud Pouliquen <arnaud.pouliquen-qxv4g6HH51o@public.gmane.org>.
+ *
+ * License terms: GPL V2.0.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more
+ * details.
+ */
+
+#ifndef STM32_DFSDM_ADC_H
+#define STM32_DFSDM_ADC_H
+
+int stm32_dfsdm_get_buff_cb(struct iio_dev *iio_dev,
+			    int (*cb)(const void *data, size_t size,
+				      void *private),
+			    void *private);
+int stm32_dfsdm_release_buff_cb(struct iio_dev *iio_dev);
+
+#endif
-- 
2.7.4

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v5 11/13] IIO: consumer: allow to set buffer sizes

[Arnaud Pouliquen]

Add iio consumer API to set buffer size and watermark according
to sysfs API.

Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen-qxv4g6HH51o@public.gmane.org>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron-hv44wF8Li93QT0dZR+AlfA@public.gmane.org>
---
 drivers/iio/buffer/industrialio-buffer-cb.c | 11 +++++++++++
 include/linux/iio/consumer.h                | 11 +++++++++++
 2 files changed, 22 insertions(+)

diff --git a/drivers/iio/buffer/industrialio-buffer-cb.c b/drivers/iio/buffer/industrialio-buffer-cb.c
index 4847534..ea63c83 100644
--- a/drivers/iio/buffer/industrialio-buffer-cb.c
+++ b/drivers/iio/buffer/industrialio-buffer-cb.c
@@ -104,6 +104,17 @@ struct iio_cb_buffer *iio_channel_get_all_cb(struct device *dev,
 }
 EXPORT_SYMBOL_GPL(iio_channel_get_all_cb);
 
+int iio_channel_cb_set_buffer_watermark(struct iio_cb_buffer *cb_buff,
+					size_t watermark)
+{
+	if (!watermark)
+		return -EINVAL;
+	cb_buff->buffer.watermark = watermark;
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(iio_channel_cb_set_buffer_watermark);
+
 int iio_channel_start_all_cb(struct iio_cb_buffer *cb_buff)
 {
 	return iio_update_buffers(cb_buff->indio_dev, &cb_buff->buffer,
diff --git a/include/linux/iio/consumer.h b/include/linux/iio/consumer.h
index 2017f35..9887f4f 100644
--- a/include/linux/iio/consumer.h
+++ b/include/linux/iio/consumer.h
@@ -134,6 +134,17 @@ struct iio_cb_buffer *iio_channel_get_all_cb(struct device *dev,
 						       void *private),
 					     void *private);
 /**
+ * iio_channel_cb_set_buffer_watermark() - set the buffer watermark.
+ * @cb_buffer:		The callback buffer from whom we want the channel
+ *			information.
+ * @watermark: buffer watermark in bytes.
+ *
+ * This function allows to configure the buffer watermark.
+ */
+int iio_channel_cb_set_buffer_watermark(struct iio_cb_buffer *cb_buffer,
+					size_t watermark);
+
+/**
  * iio_channel_release_all_cb() - release and unregister the callback.
  * @cb_buffer:		The callback buffer that was allocated.
  */
-- 
2.7.4

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v5 12/13] ASoC: add bindings for stm32 DFSDM filter

[Arnaud Pouliquen]

Add bindings that describes audio settings to support
Digital Filter for pulse density modulation(PDM) microphone.

Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen-qxv4g6HH51o@public.gmane.org>
---
 .../devicetree/bindings/sound/st,stm32-adfsdm.txt  | 62 ++++++++++++++++++++++
 1 file changed, 62 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/sound/st,stm32-adfsdm.txt

diff --git a/Documentation/devicetree/bindings/sound/st,stm32-adfsdm.txt b/Documentation/devicetree/bindings/sound/st,stm32-adfsdm.txt
new file mode 100644
index 0000000..2782cda
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/st,stm32-adfsdm.txt
@@ -0,0 +1,62 @@
+STMicroelectronics Audio Digital Filter Sigma Delta modulators(DFSDM)
+
+The DFSDM allows PDM microphones capture through SPI interface. The Audio
+interface is seems as a sub block of the DFSDM device.
+For details on DFSDM bindings refer to ../iio/adc/st,stm32-dfsdm-adc.txt
+
+Required properties:
+  - compatible: "st,stm32h7-dfsdm-dai".
+
+  - #sound-dai-cells : Must be equal to 0
+
+  - io-channels : phandle to iio dfsdm instance node.
+
+Example of a sound card using audio DFSDM node.
+
+	sound_card {
+		compatible = "audio-graph-card";
+
+		dais = <&cpu_port>;
+	};
+
+	dfsdm: dfsdm@40017000 {
+		compatible = "st,stm32h7-dfsdm";
+		reg = <0x40017000 0x400>;
+		clocks = <&rcc DFSDM1_CK>;
+		clock-names = "dfsdm";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		dfsdm_adc0: dfsdm-adc@0 {
+			compatible = "st,stm32-dfsdm-dmic";
+			reg = <0>;
+			interrupts = <110>;
+			dmas = <&dmamux1 101 0x400 0x00>;
+			dma-names = "rx";
+			st,adc-channels = <1>;
+			st,adc-channel-names = "dmic0";
+			st,adc-channel-types = "SPI_R";
+			st,adc-channel-clk-src = "CLKOUT";
+			st,filter-order = <5>;
+
+			dfsdm_dai0: dfsdm-dai {
+				compatible = "st,stm32h7-dfsdm-dai";
+				#sound-dai-cells = <0>;
+				io-channels = <&dfsdm_adc0 0>;
+				cpu_port: port {
+				dfsdm_endpoint: endpoint {
+					remote-endpoint = <&dmic0_endpoint>;
+				};
+			};
+		};
+	};
+
+	dmic0: dmic@0 {
+		compatible = "dmic-codec";
+		#sound-dai-cells = <0>;
+		port {
+			dmic0_endpoint: endpoint {
+				remote-endpoint = <&dfsdm_endpoint>;
+			};
+		};
+	};
-- 
2.7.4

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v5 13/13] ASoC: stm32: add DFSDM DAI support

[Arnaud Pouliquen]

Add driver to handle DAI interface for PDM microphones connected
to Digital Filter for Sigma Delta Modulators IP.

Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen-qxv4g6HH51o@public.gmane.org>
---
 sound/soc/stm/Kconfig        |  11 ++
 sound/soc/stm/Makefile       |   3 +
 sound/soc/stm/stm32_adfsdm.c | 386 +++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 400 insertions(+)
 create mode 100644 sound/soc/stm/stm32_adfsdm.c

diff --git a/sound/soc/stm/Kconfig b/sound/soc/stm/Kconfig
index 3398e6c..a78f770 100644
--- a/sound/soc/stm/Kconfig
+++ b/sound/soc/stm/Kconfig
@@ -28,4 +28,15 @@ config SND_SOC_STM32_SPDIFRX
 	help
 	  Say Y if you want to enable S/PDIF capture for STM32
 
+config SND_SOC_STM32_DFSDM
+	tristate "SoC Audio support for STM32 DFSDM"
+	depends on (ARCH_STM32 && OF && STM32_DFSDM_ADC) || COMPILE_TEST
+	depends on SND_SOC
+	select SND_SOC_GENERIC_DMAENGINE_PCM
+	select SND_SOC_DMIC
+	select IIO_BUFFER_CB
+	help
+	  Select this option to enable the STM32 Digital Filter
+	  for Sigma Delta Modulators (DFSDM) driver used
+	  in various STM32 series for digital microphone capture.
 endmenu
diff --git a/sound/soc/stm/Makefile b/sound/soc/stm/Makefile
index 4ed22e6..53e90e6 100644
--- a/sound/soc/stm/Makefile
+++ b/sound/soc/stm/Makefile
@@ -12,3 +12,6 @@ obj-$(CONFIG_SND_SOC_STM32_I2S) += snd-soc-stm32-i2s.o
 # SPDIFRX
 snd-soc-stm32-spdifrx-objs := stm32_spdifrx.o
 obj-$(CONFIG_SND_SOC_STM32_SPDIFRX) += snd-soc-stm32-spdifrx.o
+
+#DFSDM
+obj-$(CONFIG_SND_SOC_STM32_DFSDM) += stm32_adfsdm.o
diff --git a/sound/soc/stm/stm32_adfsdm.c b/sound/soc/stm/stm32_adfsdm.c
new file mode 100644
index 0000000..7502559
--- /dev/null
+++ b/sound/soc/stm/stm32_adfsdm.c
@@ -0,0 +1,386 @@
+/*
+ * This file is part of STM32 DFSDM ASoC DAI driver
+ *
+ * Copyright (C) 2017, STMicroelectronics - All Rights Reserved
+ * Authors: Arnaud Pouliquen <arnaud.pouliquen-qxv4g6HH51o@public.gmane.org>
+ *          Olivier Moysan <olivier.moysan-qxv4g6HH51o@public.gmane.org>
+ *
+ * License terms: GPL V2.0.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE.
+ * See the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/clk.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+#include <linux/iio/iio.h>
+#include <linux/iio/consumer.h>
+#include <linux/iio/adc/stm32-dfsdm-adc.h>
+
+#include <sound/pcm.h>
+#include <sound/soc.h>
+
+#define STM32_ADFSDM_DRV_NAME "stm32-adfsdm"
+
+#define DFSDM_MAX_PERIOD_SIZE	(PAGE_SIZE / 2)
+#define DFSDM_MAX_PERIODS	6
+
+struct stm32_adfsdm_priv {
+	struct snd_soc_dai_driver dai_drv;
+	struct snd_pcm_substream *substream;
+	struct device *dev;
+
+	/* IIO */
+	struct iio_channel *iio_ch;
+	struct iio_cb_buffer *iio_cb;
+	bool iio_active;
+
+	/* PCM buffer */
+	unsigned char *pcm_buff;
+	unsigned int pos;
+	bool allocated;
+};
+
+struct stm32_adfsdm_data {
+	unsigned int rate;	/* SNDRV_PCM_RATE value */
+	unsigned int freq;	/* frequency in Hz */
+};
+
+static const struct snd_pcm_hardware stm32_adfsdm_pcm_hw = {
+	.info = SNDRV_PCM_INFO_INTERLEAVED | SNDRV_PCM_INFO_BLOCK_TRANSFER |
+	    SNDRV_PCM_INFO_PAUSE,
+	.formats = SNDRV_PCM_FMTBIT_S32_LE,
+
+	.rate_min = 8000,
+	.rate_max = 32000,
+
+	.channels_min = 1,
+	.channels_max = 1,
+
+	.periods_min = 2,
+	.periods_max = DFSDM_MAX_PERIODS,
+
+	.period_bytes_max = DFSDM_MAX_PERIOD_SIZE,
+	.buffer_bytes_max = DFSDM_MAX_PERIODS * DFSDM_MAX_PERIOD_SIZE
+};
+
+static void stm32_adfsdm_shutdown(struct snd_pcm_substream *substream,
+				  struct snd_soc_dai *dai)
+{
+	struct stm32_adfsdm_priv *priv = snd_soc_dai_get_drvdata(dai);
+
+	if (priv->iio_active) {
+		iio_channel_stop_all_cb(priv->iio_cb);
+		priv->iio_active = false;
+	}
+}
+
+static int stm32_adfsdm_dai_prepare(struct snd_pcm_substream *substream,
+				    struct snd_soc_dai *dai)
+{
+	struct stm32_adfsdm_priv *priv = snd_soc_dai_get_drvdata(dai);
+	int ret;
+
+	ret = iio_write_channel_attribute(priv->iio_ch,
+					  substream->runtime->rate, 0,
+					  IIO_CHAN_INFO_SAMP_FREQ);
+	if (ret < 0) {
+		dev_err(dai->dev, "%s: Failed to set %d sampling rate\n",
+			__func__, substream->runtime->rate);
+		return ret;
+	}
+
+	if (!priv->iio_active) {
+		ret = iio_channel_start_all_cb(priv->iio_cb);
+		if (!ret)
+			priv->iio_active = true;
+		else
+			dev_err(dai->dev, "%s: IIO channel start failed (%d)\n",
+				__func__, ret);
+	}
+
+	return ret;
+}
+
+static int stm32_adfsdm_set_sysclk(struct snd_soc_dai *dai, int clk_id,
+				   unsigned int freq, int dir)
+{
+	struct stm32_adfsdm_priv *priv = snd_soc_dai_get_drvdata(dai);
+	ssize_t size;
+
+	dev_dbg(dai->dev, "%s: Enter for freq %d\n", __func__, freq);
+
+	/* Set IIO frequency if CODEC is master as clock comes from SPI_IN*/
+	if (dir == SND_SOC_CLOCK_IN) {
+		char str_freq[10];
+
+		snprintf(str_freq, sizeof(str_freq), "%d\n", freq);
+		size = iio_write_channel_ext_info(priv->iio_ch, "spi_clk_freq",
+						  str_freq, sizeof(str_freq));
+		if (size != sizeof(str_freq)) {
+			dev_err(dai->dev, "%s: Failed to set SPI clock\n",
+				__func__);
+			return -EINVAL;
+		}
+	}
+	return 0;
+}
+
+static const struct snd_soc_dai_ops stm32_adfsdm_dai_ops = {
+	.shutdown = stm32_adfsdm_shutdown,
+	.prepare = stm32_adfsdm_dai_prepare,
+	.set_sysclk = stm32_adfsdm_set_sysclk,
+};
+
+static const struct snd_soc_dai_driver stm32_adfsdm_dai = {
+	.capture = {
+		    .channels_min = 1,
+		    .channels_max = 1,
+		    .formats = SNDRV_PCM_FMTBIT_S32_LE,
+		    .rates = (SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_16000 |
+			      SNDRV_PCM_RATE_32000),
+		    },
+	.ops = &stm32_adfsdm_dai_ops,
+};
+
+static const struct snd_soc_component_driver stm32_adfsdm_dai_component = {
+	.name = "stm32_dfsdm_audio",
+};
+
+static int stm32_afsdm_pcm_cb(const void *data, size_t size, void *private)
+{
+	struct stm32_adfsdm_priv *priv = private;
+	struct snd_soc_pcm_runtime *rtd = priv->substream->private_data;
+	u8 *pcm_buff = priv->pcm_buff;
+	u8 *src_buff = (u8 *)data;
+	unsigned int buff_size = snd_pcm_lib_buffer_bytes(priv->substream);
+	unsigned int period_size = snd_pcm_lib_period_bytes(priv->substream);
+	unsigned int old_pos = priv->pos;
+	unsigned int cur_size = size;
+
+	dev_dbg(rtd->dev, "%s: buff_add :%p, pos = %d, size = %d\n",
+		__func__, &pcm_buff[priv->pos], priv->pos, size);
+
+	if ((priv->pos + size) > buff_size) {
+		memcpy(&pcm_buff[priv->pos], src_buff, buff_size - priv->pos);
+		cur_size -= buff_size - priv->pos;
+		priv->pos = 0;
+	}
+
+	memcpy(&pcm_buff[priv->pos], &src_buff[size - cur_size], cur_size);
+	priv->pos = (priv->pos + cur_size) % buff_size;
+
+	if (cur_size != size || (old_pos && (old_pos % period_size < size)))
+		snd_pcm_period_elapsed(priv->substream);
+
+	return 0;
+}
+
+static int stm32_adfsdm_trigger(struct snd_pcm_substream *substream, int cmd)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct stm32_adfsdm_priv *priv =
+		snd_soc_dai_get_drvdata(rtd->cpu_dai);
+
+	switch (cmd) {
+	case SNDRV_PCM_TRIGGER_START:
+	case SNDRV_PCM_TRIGGER_RESUME:
+		priv->pos = 0;
+		return stm32_dfsdm_get_buff_cb(priv->iio_ch->indio_dev,
+					stm32_afsdm_pcm_cb, priv);
+	case SNDRV_PCM_TRIGGER_SUSPEND:
+	case SNDRV_PCM_TRIGGER_STOP:
+		return stm32_dfsdm_release_buff_cb(priv->iio_ch->indio_dev);
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int stm32_adfsdm_pcm_open(struct snd_pcm_substream *substream)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct stm32_adfsdm_priv *priv = snd_soc_dai_get_drvdata(rtd->cpu_dai);
+	int ret;
+
+	ret =  snd_soc_set_runtime_hwparams(substream, &stm32_adfsdm_pcm_hw);
+	if (!ret)
+		priv->substream = substream;
+
+	return ret;
+}
+
+static int stm32_adfsdm_pcm_close(struct snd_pcm_substream *substream)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct stm32_adfsdm_priv *priv =
+		snd_soc_dai_get_drvdata(rtd->cpu_dai);
+
+	snd_pcm_lib_free_pages(substream);
+	priv->substream = NULL;
+
+	return 0;
+}
+
+static snd_pcm_uframes_t stm32_adfsdm_pcm_pointer(
+					    struct snd_pcm_substream *substream)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct stm32_adfsdm_priv *priv =
+		snd_soc_dai_get_drvdata(rtd->cpu_dai);
+
+	return bytes_to_frames(substream->runtime, priv->pos);
+}
+
+static int stm32_adfsdm_pcm_hw_params(struct snd_pcm_substream *substream,
+				      struct snd_pcm_hw_params *params)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct stm32_adfsdm_priv *priv =
+		snd_soc_dai_get_drvdata(rtd->cpu_dai);
+	int ret;
+
+	ret =  snd_pcm_lib_malloc_pages(substream, params_buffer_bytes(params));
+	if (ret < 0)
+		return ret;
+	priv->pcm_buff = substream->runtime->dma_area;
+
+	return iio_channel_cb_set_buffer_watermark(priv->iio_cb,
+						   params_period_size(params));
+}
+
+static int stm32_adfsdm_pcm_hw_free(struct snd_pcm_substream *substream)
+{
+	snd_pcm_lib_free_pages(substream);
+
+	return 0;
+}
+
+static struct snd_pcm_ops stm32_adfsdm_pcm_ops = {
+	.open		= stm32_adfsdm_pcm_open,
+	.close		= stm32_adfsdm_pcm_close,
+	.hw_params	= stm32_adfsdm_pcm_hw_params,
+	.hw_free	= stm32_adfsdm_pcm_hw_free,
+	.trigger	= stm32_adfsdm_trigger,
+	.pointer	= stm32_adfsdm_pcm_pointer,
+};
+
+static int stm32_adfsdm_pcm_new(struct snd_soc_pcm_runtime *rtd)
+{
+	struct snd_pcm *pcm = rtd->pcm;
+	struct stm32_adfsdm_priv *priv =
+		snd_soc_dai_get_drvdata(rtd->cpu_dai);
+	unsigned int size = DFSDM_MAX_PERIODS * DFSDM_MAX_PERIOD_SIZE;
+	int ret;
+
+	/*
+	 * FIXME :
+	 * A platform as been registered per DAI.
+	 * In soc_new_pcm function, pcm_new callback is called for each
+	 * component of the sound card. So if n dai links are created this
+	 * function is called n times.
+	 */
+	if (priv->allocated)
+		return 0;
+
+	ret = snd_pcm_lib_preallocate_pages_for_all(pcm, SNDRV_DMA_TYPE_DEV,
+						    priv->dev, size, size);
+	if (!ret)
+		priv->allocated = true;
+
+	return ret;
+}
+
+static void stm32_adfsdm_pcm_free(struct snd_pcm *pcm)
+{
+	struct snd_pcm_substream *substream;
+	struct snd_soc_pcm_runtime *rtd;
+	struct stm32_adfsdm_priv *priv;
+
+	substream = pcm->streams[SNDRV_PCM_STREAM_CAPTURE].substream;
+	if (substream) {
+		rtd = substream->private_data;
+		priv = snd_soc_dai_get_drvdata(rtd->cpu_dai);
+
+		snd_pcm_lib_preallocate_free_for_all(pcm);
+		priv->allocated = false;
+	}
+}
+
+static struct snd_soc_platform_driver stm32_adfsdm_soc_platform = {
+	.ops		= &stm32_adfsdm_pcm_ops,
+	.pcm_new	= stm32_adfsdm_pcm_new,
+	.pcm_free	= stm32_adfsdm_pcm_free,
+};
+
+static const struct of_device_id stm32_adfsdm_of_match[] = {
+	{.compatible = "st,stm32h7-dfsdm-dai"},
+	{}
+};
+MODULE_DEVICE_TABLE(of, stm32_adfsdm_of_match);
+
+static int stm32_adfsdm_probe(struct platform_device *pdev)
+{
+	struct stm32_adfsdm_priv *priv;
+	int ret;
+
+	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->dev = &pdev->dev;
+	priv->dai_drv = stm32_adfsdm_dai;
+
+	dev_set_drvdata(&pdev->dev, priv);
+
+	ret = devm_snd_soc_register_component(&pdev->dev,
+					      &stm32_adfsdm_dai_component,
+					      &priv->dai_drv, 1);
+	if (ret < 0)
+		return ret;
+
+	/* Associate iio channel */
+	priv->iio_ch  = devm_iio_channel_get_all(&pdev->dev);
+	if (IS_ERR(priv->iio_ch))
+		return PTR_ERR(priv->iio_ch);
+
+	priv->iio_cb = iio_channel_get_all_cb(&pdev->dev, NULL, NULL);
+	if (IS_ERR(priv->iio_cb))
+		return PTR_ERR(priv->iio_ch);
+
+	ret = devm_snd_soc_register_platform(&pdev->dev,
+					     &stm32_adfsdm_soc_platform);
+	if (ret < 0)
+		dev_err(&pdev->dev, "%s: Failed to register PCM platform\n",
+			__func__);
+
+	return ret;
+}
+
+static struct platform_driver stm32_adfsdm_driver = {
+	.driver = {
+		   .name = STM32_ADFSDM_DRV_NAME,
+		   .of_match_table = stm32_adfsdm_of_match,
+		   },
+	.probe = stm32_adfsdm_probe,
+};
+
+module_platform_driver(stm32_adfsdm_driver);
+
+MODULE_DESCRIPTION("stm32 DFSDM DAI driver");
+MODULE_AUTHOR("Arnaud Pouliquen <arnaud.pouliquen-qxv4g6HH51o@public.gmane.org>");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:" STM32_ADFSDM_DRV_NAME);
-- 
2.7.4

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH v5 13/13] ASoC: stm32: add DFSDM DAI support

[Mark Brown]

[-- Attachment #1.1: Type: text/plain, Size: 350 bytes --]

On Tue, Nov 28, 2017 at 04:05:57PM +0100, Arnaud Pouliquen wrote:
> Add driver to handle DAI interface for PDM microphones connected
> to Digital Filter for Sigma Delta Modulators IP.

This is basically fine, if someone could send me a pull request and the
relevant patches when the IIO stuff is sorted out I'll give it a final
check and apply then.

[-- Attachment #1.2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

[-- Attachment #2: Type: text/plain, Size: 0 bytes --]

Re: [alsa-devel] [PATCH v5 13/13] ASoC: stm32: add DFSDM DAI support

[kbuild test robot]

[-- Attachment #1: Type: text/plain, Size: 7495 bytes --]

Hi Arnaud,

Thank you for the patch! Perhaps something to improve:

[auto build test WARNING on iio/togreg]
[also build test WARNING on v4.15-rc1 next-20171201]
[if your patch is applied to the wrong git tree, please drop us a note to help improve the system]

url:    https://github.com/0day-ci/linux/commits/Arnaud-Pouliquen/Add-STM32-DFSDM-support/20171201-215409
base:   https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio.git togreg
config: blackfin-allyesconfig (attached as .config)
compiler: bfin-uclinux-gcc (GCC) 6.2.0
reproduce:
        wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
        chmod +x ~/bin/make.cross
        # save the attached .config to linux build tree
        make.cross ARCH=blackfin 

All warnings (new ones prefixed by >>):

   In file included from include/linux/printk.h:329:0,
                    from include/linux/kernel.h:13,
                    from include/linux/clk.h:16,
                    from sound/soc//stm/stm32_adfsdm.c:23:
   sound/soc//stm/stm32_adfsdm.c: In function 'stm32_afsdm_pcm_cb':
>> sound/soc//stm/stm32_adfsdm.c:173:20: warning: format '%d' expects argument of type 'int', but argument 7 has type 'size_t {aka long unsigned int}' [-Wformat=]
     dev_dbg(rtd->dev, "%s: buff_add :%p, pos = %d, size = %d\n",
                       ^
   include/linux/dynamic_debug.h:134:39: note: in definition of macro 'dynamic_dev_dbg'
      __dynamic_dev_dbg(&descriptor, dev, fmt, \
                                          ^~~
>> sound/soc//stm/stm32_adfsdm.c:173:2: note: in expansion of macro 'dev_dbg'
     dev_dbg(rtd->dev, "%s: buff_add :%p, pos = %d, size = %d\n",
     ^~~~~~~

vim +/dev_dbg +173 sound/soc//stm/stm32_adfsdm.c

  > 23	#include <linux/clk.h>
    24	#include <linux/module.h>
    25	#include <linux/platform_device.h>
    26	#include <linux/slab.h>
    27	
    28	#include <linux/iio/iio.h>
    29	#include <linux/iio/consumer.h>
    30	#include <linux/iio/adc/stm32-dfsdm-adc.h>
    31	
    32	#include <sound/pcm.h>
    33	#include <sound/soc.h>
    34	
    35	#define STM32_ADFSDM_DRV_NAME "stm32-adfsdm"
    36	
    37	#define DFSDM_MAX_PERIOD_SIZE	(PAGE_SIZE / 2)
    38	#define DFSDM_MAX_PERIODS	6
    39	
    40	struct stm32_adfsdm_priv {
    41		struct snd_soc_dai_driver dai_drv;
    42		struct snd_pcm_substream *substream;
    43		struct device *dev;
    44	
    45		/* IIO */
    46		struct iio_channel *iio_ch;
    47		struct iio_cb_buffer *iio_cb;
    48		bool iio_active;
    49	
    50		/* PCM buffer */
    51		unsigned char *pcm_buff;
    52		unsigned int pos;
    53		bool allocated;
    54	};
    55	
    56	struct stm32_adfsdm_data {
    57		unsigned int rate;	/* SNDRV_PCM_RATE value */
    58		unsigned int freq;	/* frequency in Hz */
    59	};
    60	
    61	static const struct snd_pcm_hardware stm32_adfsdm_pcm_hw = {
    62		.info = SNDRV_PCM_INFO_INTERLEAVED | SNDRV_PCM_INFO_BLOCK_TRANSFER |
    63		    SNDRV_PCM_INFO_PAUSE,
    64		.formats = SNDRV_PCM_FMTBIT_S32_LE,
    65	
    66		.rate_min = 8000,
    67		.rate_max = 32000,
    68	
    69		.channels_min = 1,
    70		.channels_max = 1,
    71	
    72		.periods_min = 2,
    73		.periods_max = DFSDM_MAX_PERIODS,
    74	
    75		.period_bytes_max = DFSDM_MAX_PERIOD_SIZE,
    76		.buffer_bytes_max = DFSDM_MAX_PERIODS * DFSDM_MAX_PERIOD_SIZE
    77	};
    78	
    79	static void stm32_adfsdm_shutdown(struct snd_pcm_substream *substream,
    80					  struct snd_soc_dai *dai)
    81	{
    82		struct stm32_adfsdm_priv *priv = snd_soc_dai_get_drvdata(dai);
    83	
    84		if (priv->iio_active) {
    85			iio_channel_stop_all_cb(priv->iio_cb);
    86			priv->iio_active = false;
    87		}
    88	}
    89	
    90	static int stm32_adfsdm_dai_prepare(struct snd_pcm_substream *substream,
    91					    struct snd_soc_dai *dai)
    92	{
    93		struct stm32_adfsdm_priv *priv = snd_soc_dai_get_drvdata(dai);
    94		int ret;
    95	
    96		ret = iio_write_channel_attribute(priv->iio_ch,
    97						  substream->runtime->rate, 0,
    98						  IIO_CHAN_INFO_SAMP_FREQ);
    99		if (ret < 0) {
   100			dev_err(dai->dev, "%s: Failed to set %d sampling rate\n",
   101				__func__, substream->runtime->rate);
   102			return ret;
   103		}
   104	
   105		if (!priv->iio_active) {
   106			ret = iio_channel_start_all_cb(priv->iio_cb);
   107			if (!ret)
   108				priv->iio_active = true;
   109			else
   110				dev_err(dai->dev, "%s: IIO channel start failed (%d)\n",
   111					__func__, ret);
   112		}
   113	
   114		return ret;
   115	}
   116	
   117	static int stm32_adfsdm_set_sysclk(struct snd_soc_dai *dai, int clk_id,
   118					   unsigned int freq, int dir)
   119	{
   120		struct stm32_adfsdm_priv *priv = snd_soc_dai_get_drvdata(dai);
   121		ssize_t size;
   122	
   123		dev_dbg(dai->dev, "%s: Enter for freq %d\n", __func__, freq);
   124	
   125		/* Set IIO frequency if CODEC is master as clock comes from SPI_IN*/
   126		if (dir == SND_SOC_CLOCK_IN) {
   127			char str_freq[10];
   128	
   129			snprintf(str_freq, sizeof(str_freq), "%d\n", freq);
   130			size = iio_write_channel_ext_info(priv->iio_ch, "spi_clk_freq",
   131							  str_freq, sizeof(str_freq));
   132			if (size != sizeof(str_freq)) {
   133				dev_err(dai->dev, "%s: Failed to set SPI clock\n",
   134					__func__);
   135				return -EINVAL;
   136			}
   137		}
   138		return 0;
   139	}
   140	
   141	static const struct snd_soc_dai_ops stm32_adfsdm_dai_ops = {
   142		.shutdown = stm32_adfsdm_shutdown,
   143		.prepare = stm32_adfsdm_dai_prepare,
   144		.set_sysclk = stm32_adfsdm_set_sysclk,
   145	};
   146	
   147	static const struct snd_soc_dai_driver stm32_adfsdm_dai = {
   148		.capture = {
   149			    .channels_min = 1,
   150			    .channels_max = 1,
   151			    .formats = SNDRV_PCM_FMTBIT_S32_LE,
   152			    .rates = (SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_16000 |
   153				      SNDRV_PCM_RATE_32000),
   154			    },
   155		.ops = &stm32_adfsdm_dai_ops,
   156	};
   157	
   158	static const struct snd_soc_component_driver stm32_adfsdm_dai_component = {
   159		.name = "stm32_dfsdm_audio",
   160	};
   161	
   162	static int stm32_afsdm_pcm_cb(const void *data, size_t size, void *private)
   163	{
   164		struct stm32_adfsdm_priv *priv = private;
   165		struct snd_soc_pcm_runtime *rtd = priv->substream->private_data;
   166		u8 *pcm_buff = priv->pcm_buff;
   167		u8 *src_buff = (u8 *)data;
   168		unsigned int buff_size = snd_pcm_lib_buffer_bytes(priv->substream);
   169		unsigned int period_size = snd_pcm_lib_period_bytes(priv->substream);
   170		unsigned int old_pos = priv->pos;
   171		unsigned int cur_size = size;
   172	
 > 173		dev_dbg(rtd->dev, "%s: buff_add :%p, pos = %d, size = %d\n",
   174			__func__, &pcm_buff[priv->pos], priv->pos, size);
   175	
   176		if ((priv->pos + size) > buff_size) {
   177			memcpy(&pcm_buff[priv->pos], src_buff, buff_size - priv->pos);
   178			cur_size -= buff_size - priv->pos;
   179			priv->pos = 0;
   180		}
   181	
   182		memcpy(&pcm_buff[priv->pos], &src_buff[size - cur_size], cur_size);
   183		priv->pos = (priv->pos + cur_size) % buff_size;
   184	
   185		if (cur_size != size || (old_pos && (old_pos % period_size < size)))
   186			snd_pcm_period_elapsed(priv->substream);
   187	
   188		return 0;
   189	}
   190	

---
0-DAY kernel test infrastructure                Open Source Technology Center
https://lists.01.org/pipermail/kbuild-all                   Intel Corporation

[-- Attachment #2: .config.gz --]
[-- Type: application/gzip, Size: 46104 bytes --]

Re: [alsa-devel] [PATCH v5 13/13] ASoC: stm32: add DFSDM DAI support

[kbuild test robot]

[-- Attachment #1: Type: text/plain, Size: 2403 bytes --]

Hi Arnaud,

Thank you for the patch! Perhaps something to improve:

[auto build test WARNING on iio/togreg]
[also build test WARNING on v4.15-rc1 next-20171201]
[if your patch is applied to the wrong git tree, please drop us a note to help improve the system]

url:    https://github.com/0day-ci/linux/commits/Arnaud-Pouliquen/Add-STM32-DFSDM-support/20171201-215409
base:   https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio.git togreg
config: tile-allyesconfig (attached as .config)
compiler: tilegx-linux-gcc (GCC) 4.6.2
reproduce:
        wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
        chmod +x ~/bin/make.cross
        # save the attached .config to linux build tree
        make.cross ARCH=tile 

All warnings (new ones prefixed by >>):

   sound/soc/stm/stm32_adfsdm.c: In function 'stm32_afsdm_pcm_cb':
>> sound/soc/stm/stm32_adfsdm.c:173:2: warning: format '%d' expects argument of type 'int', but argument 7 has type 'size_t' [-Wformat]

vim +173 sound/soc/stm/stm32_adfsdm.c

   161	
   162	static int stm32_afsdm_pcm_cb(const void *data, size_t size, void *private)
   163	{
   164		struct stm32_adfsdm_priv *priv = private;
   165		struct snd_soc_pcm_runtime *rtd = priv->substream->private_data;
   166		u8 *pcm_buff = priv->pcm_buff;
   167		u8 *src_buff = (u8 *)data;
   168		unsigned int buff_size = snd_pcm_lib_buffer_bytes(priv->substream);
   169		unsigned int period_size = snd_pcm_lib_period_bytes(priv->substream);
   170		unsigned int old_pos = priv->pos;
   171		unsigned int cur_size = size;
   172	
 > 173		dev_dbg(rtd->dev, "%s: buff_add :%p, pos = %d, size = %d\n",
   174			__func__, &pcm_buff[priv->pos], priv->pos, size);
   175	
   176		if ((priv->pos + size) > buff_size) {
   177			memcpy(&pcm_buff[priv->pos], src_buff, buff_size - priv->pos);
   178			cur_size -= buff_size - priv->pos;
   179			priv->pos = 0;
   180		}
   181	
   182		memcpy(&pcm_buff[priv->pos], &src_buff[size - cur_size], cur_size);
   183		priv->pos = (priv->pos + cur_size) % buff_size;
   184	
   185		if (cur_size != size || (old_pos && (old_pos % period_size < size)))
   186			snd_pcm_period_elapsed(priv->substream);
   187	
   188		return 0;
   189	}
   190	

---
0-DAY kernel test infrastructure                Open Source Technology Center
https://lists.01.org/pipermail/kbuild-all                   Intel Corporation

[-- Attachment #2: .config.gz --]
[-- Type: application/gzip, Size: 50547 bytes --]