From mboxrd@z Thu Jan 1 00:00:00 1970 From: Alexandre Belloni Subject: Re: [PATCH v2] ARM: dts: at91: add devicetree for the Axentia Nattis with Natte power Date: Mon, 4 Dec 2017 20:38:02 +0100 Message-ID: <20171204193802.GG21780@piout.net> References: <20171204135708.8234-1-peda@axentia.se> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Return-path: Content-Disposition: inline In-Reply-To: <20171204135708.8234-1-peda@axentia.se> Sender: linux-kernel-owner@vger.kernel.org To: Peter Rosin Cc: linux-kernel@vger.kernel.org, Rob Herring , Mark Rutland , Russell King , Nicolas Ferre , linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org List-Id: devicetree@vger.kernel.org On 04/12/2017 at 14:57:08 +0100, Peter Rosin wrote: > The Axentia Nattis is a device designed for presenting departures for > public transport systems. The Natte helper board provides power and > features a battery of battery chargers. > > Signed-off-by: Peter Rosin > --- > > This was part of a two-patch series, but the first patch in that > series was redundant, so I dropped it (there was a dt binding > recently added for the tfa9879 amplifier that I had not noticed). > > Changes since v1: https://lkml.org/lkml/2017/12/1/844 > - removed chip-ids from before the @-sign instead naming the nodes > for the function, e.g sx1502q@20 -> ioexp@20 > - added #sound-dai-cells to the amplifier node > - switch to SPDX license tags > > Cheers, > Peter > > Documentation/devicetree/bindings/arm/axentia.txt | 9 + > MAINTAINERS | 2 + > arch/arm/boot/dts/Makefile | 1 + > arch/arm/boot/dts/at91-natte.dtsi | 244 ++++++++++++++++++++ > arch/arm/boot/dts/at91-nattis-2-natte-2.dts | 258 ++++++++++++++++++++++ > 5 files changed, 514 insertions(+) > create mode 100644 arch/arm/boot/dts/at91-natte.dtsi > create mode 100644 arch/arm/boot/dts/at91-nattis-2-natte-2.dts > Applied, thanks. -- Alexandre Belloni, Free Electrons Embedded Linux and Kernel engineering http://free-electrons.com