[PATCH v2 1/2] arm64: dts: a64-olinuxino: Enable RTL8723BS WiFi

[PATCH v2 1/2] arm64: dts: a64-olinuxino: Enable RTL8723BS WiFi

[Jagan Teki]

Enable RTL8723BS WiFi chip on a64-olinuxino board:
- WiFi SDIO interface is connected to MMC1
- WiFi REG_ON pin connected to gpio PL2: attach to mmc-pwrseq
- WiFi HOST_WAKE pin connected to gpio PL3

Signed-off-by: Jagan Teki <jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>
Acked-by: Maxime Ripard <maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>
---
Changes for v2:
- Remove wrong commit message

 .../boot/dts/allwinner/sun50i-a64-olinuxino.dts    | 23 ++++++++++++++++++++++
 1 file changed, 23 insertions(+)

diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts
index 338e7861..8807664 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts
@@ -57,6 +57,11 @@
 	chosen {
 		stdout-path = "serial0:115200n8";
 	};
+
+	wifi_pwrseq: wifi_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */
+	};
 };
 
 &mmc0 {
@@ -70,6 +75,24 @@
 	status = "okay";
 };
 
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+	vmmc-supply = <&reg_aldo2>;
+	vqmmc-supply = <&reg_dldo4>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	rtl8723bs: wifi@1 {
+		reg = <1>;
+		interrupt-parent = <&r_pio>;
+		interrupts = <0 3 IRQ_TYPE_LEVEL_LOW>; /* PL3 */
+		interrupt-names = "host-wake";
+	};
+};
+
 &r_rsb {
 	status = "okay";
 
-- 
2.7.4

[PATCH v2 2/2] arm64: allwinner: a64-sopine: Fix to use dcdc1 regulator instead of vcc3v3

[Jagan Teki]

Since current tree support AXP803 regulators,
replace fixed regulator vcc3v3 with AXP803 dcdc1 regulator where ever
it need to replace.

Tested mmc0 on sopine baseboard.

Signed-off-by: Jagan Teki <jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>
---
Changes for v2:
- Commit message edited as fix since it has issue with sdcard detect.

 arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts |  2 +-
 arch/arm64/boot/dts/allwinner/sun50i-a64-sopine.dtsi          | 11 +----------
 2 files changed, 2 insertions(+), 11 deletions(-)

diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts
index a053a6a..abe179d 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts
@@ -96,7 +96,7 @@
 &mmc2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc2_pins>;
-	vmmc-supply = <&reg_vcc3v3>;
+	vmmc-supply = <&reg_dcdc1>;
 	vqmmc-supply = <&reg_vcc1v8>;
 	bus-width = <8>;
 	non-removable;
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine.dtsi
index a5da18a..43418bd 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine.dtsi
@@ -45,19 +45,10 @@
 
 #include "sun50i-a64.dtsi"
 
-/ {
-	reg_vcc3v3: vcc3v3 {
-		compatible = "regulator-fixed";
-		regulator-name = "vcc3v3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-	};
-};
-
 &mmc0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc0_pins>;
-	vmmc-supply = <&reg_vcc3v3>;
+	vmmc-supply = <&reg_dcdc1>;
 	non-removable;
 	disable-wp;
 	bus-width = <4>;
-- 
2.7.4

Re: [PATCH v2 2/2] arm64: allwinner: a64-sopine: Fix to use dcdc1 regulator instead of vcc3v3

[Maxime Ripard]

[-- Attachment #1: Type: text/plain, Size: 478 bytes --]

On Mon, Dec 04, 2017 at 10:23:07AM +0530, Jagan Teki wrote:
> Since current tree support AXP803 regulators,
> replace fixed regulator vcc3v3 with AXP803 dcdc1 regulator where ever
> it need to replace.
> 
> Tested mmc0 on sopine baseboard.
> 
> Signed-off-by: Jagan Teki <jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>

Queued as a fix, thanks

Maxime

-- 
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

Re: [PATCH v2 1/2] arm64: dts: a64-olinuxino: Enable RTL8723BS WiFi

[Maxime Ripard]

[-- Attachment #1: Type: text/plain, Size: 571 bytes --]

On Mon, Dec 04, 2017 at 10:23:06AM +0530, Jagan Teki wrote:
> Enable RTL8723BS WiFi chip on a64-olinuxino board:
> - WiFi SDIO interface is connected to MMC1
> - WiFi REG_ON pin connected to gpio PL2: attach to mmc-pwrseq
> - WiFi HOST_WAKE pin connected to gpio PL3
> 
> Signed-off-by: Jagan Teki <jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>
> Acked-by: Maxime Ripard <maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>

Applied, thanks!
Maxime

-- 
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com