From: tyler-yzvPICuk2AAEdKtRPRuaE5USO3DlRtUf@public.gmane.org
To: shawnguo-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
festevam-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org,
kernel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org
Cc: robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
mark.rutland-5wv7dgnIgG8@public.gmane.org,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
fabio.estevam-3arQi8VN3Tc@public.gmane.org,
Tyler Baker
<tyler-yzvPICuk2AAEdKtRPRuaE5USO3DlRtUf@public.gmane.org>
Subject: [PATCH v1 0/6] ARM: dts: introduce Compulab IoT Gateway
Date: Tue, 5 Dec 2017 14:27:01 -0800 [thread overview]
Message-ID: <20171205222707.11302-1-tyler@opensourcefoundries.com> (raw)
From: Tyler Baker <tyler-yzvPICuk2AAEdKtRPRuaE5USO3DlRtUf@public.gmane.org>
The Compulab IoT Gateway is based on an NXP i.MX7D, dual core
Cortex-A7 clocking at 1GHz. It supports up to 2GB of DDR3,
and 32GB of eMMC flash. Onboard, there are two gigabit
ethernet controllers, 4 x USB2, RS485, and CAN.
It uses the same SoM as the cl-som-imx7, but includes a baseboard
with additional I/O.
Compulab has provided patches for this platform based on v4.1.
I've used these patches as reference to get things working on tip.
Changes for v1 (Requested by Fabio)
* Squashed the dts build into the initial patch
* Dropped the phy refclk patch from this series, submitting to PCI list
* Removed fsl,spi-num-chipselects property
* Removed LCD and DVI nodes, will follow up with a later series
* s/fsl,uart-has-rtscts/uart-has-rtscts/g
* Fixed regulator usage inside of simple-bus
The entire series is based on v4.15-rc2.
Tyler Baker (6):
ARM: dts: imx7d-sbc-iot: add initial iot gateway dts
ARM: dts: imx7d-cl-som: add nodes for usbh, and usbotg2
ARM: dts: imx7s: add dma support
ARM: dts: imx7s: add node and supplies for vdd1p2
ARM: dts: imx7d-sbc-iot: enable PCIe peripheral
ARM: dts: imx7s: add usb hsic phy domain
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/imx7d-cl-som-imx7.dts | 34 +++++--
arch/arm/boot/dts/imx7d-sbc-iot-imx7.dts | 169 +++++++++++++++++++++++++++++++
arch/arm/boot/dts/imx7s.dtsi | 29 +++++-
4 files changed, 225 insertions(+), 8 deletions(-)
create mode 100644 arch/arm/boot/dts/imx7d-sbc-iot-imx7.dts
--
2.9.3
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next reply other threads:[~2017-12-05 22:27 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-12-05 22:27 tyler-yzvPICuk2AAEdKtRPRuaE5USO3DlRtUf [this message]
2017-12-05 22:27 ` [PATCH v1 1/6] ARM: dts: imx7d-sbc-iot: add initial iot gateway dts tyler
[not found] ` <20171205222707.11302-2-tyler-yzvPICuk2AAEdKtRPRuaE5USO3DlRtUf@public.gmane.org>
2017-12-10 15:10 ` Fabio Estevam
2017-12-05 22:27 ` [PATCH v1 3/6] ARM: dts: imx7s: add dma support tyler
[not found] ` <20171205222707.11302-4-tyler-yzvPICuk2AAEdKtRPRuaE5USO3DlRtUf@public.gmane.org>
2017-12-10 15:15 ` Fabio Estevam
2017-12-05 22:27 ` [PATCH v1 4/6] ARM: dts: imx7s: add node and supplies for vdd1p2 tyler
[not found] ` <20171205222707.11302-5-tyler-yzvPICuk2AAEdKtRPRuaE5USO3DlRtUf@public.gmane.org>
2017-12-10 15:20 ` Fabio Estevam
[not found] ` <20171205222707.11302-1-tyler-yzvPICuk2AAEdKtRPRuaE5USO3DlRtUf@public.gmane.org>
2017-12-05 22:27 ` [PATCH v1 2/6] ARM: dts: imx7d-cl-som: add nodes for usbh, and usbotg2 tyler-yzvPICuk2AAEdKtRPRuaE5USO3DlRtUf
2017-12-10 15:14 ` Fabio Estevam
2017-12-05 22:27 ` [PATCH v1 5/6] ARM: dts: imx7d-sbc-iot: enable PCIe peripheral tyler-yzvPICuk2AAEdKtRPRuaE5USO3DlRtUf
[not found] ` <20171205222707.11302-6-tyler-yzvPICuk2AAEdKtRPRuaE5USO3DlRtUf@public.gmane.org>
2017-12-10 15:20 ` Fabio Estevam
2017-12-05 22:27 ` [PATCH v1 6/6] ARM: dts: imx7s: add usb hsic phy domain tyler
[not found] ` <20171205222707.11302-7-tyler-yzvPICuk2AAEdKtRPRuaE5USO3DlRtUf@public.gmane.org>
2017-12-10 15:23 ` Fabio Estevam
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20171205222707.11302-1-tyler@opensourcefoundries.com \
--to=tyler-yzvpicuk2aaedktrpruae5uso3dlrtuf@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=fabio.estevam-3arQi8VN3Tc@public.gmane.org \
--cc=festevam-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
--cc=kernel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=mark.rutland-5wv7dgnIgG8@public.gmane.org \
--cc=robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=shawnguo-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).