From: Stefan Agner <stefan@agner.ch>
To: shawnguo@kernel.org, kernel@pengutronix.de
Cc: fabio.estevam@nxp.com, robh+dt@kernel.org, mark.rutland@arm.com,
linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, Stefan Agner <stefan@agner.ch>
Subject: [PATCH 2/9] ARM: dts: imx7-colibri: make sure multiplexed pins are not active
Date: Wed, 6 Dec 2017 16:29:58 +0100 [thread overview]
Message-ID: <20171206153005.6144-2-stefan@agner.ch> (raw)
In-Reply-To: <20171206153005.6144-1-stefan@agner.ch>
The Colibri pins PWM<A> and <D> are multiplexed on the module, make
sure the secondary SoC pin is not active.
Signed-off-by: Stefan Agner <stefan@agner.ch>
---
arch/arm/boot/dts/imx7-colibri.dtsi | 2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/arm/boot/dts/imx7-colibri.dtsi b/arch/arm/boot/dts/imx7-colibri.dtsi
index 60ea7557d8c9..dae6b561145b 100644
--- a/arch/arm/boot/dts/imx7-colibri.dtsi
+++ b/arch/arm/boot/dts/imx7-colibri.dtsi
@@ -507,6 +507,7 @@
pinctrl_pwm1: pwm1-grp {
fsl,pins = <
MX7D_PAD_GPIO1_IO08__PWM1_OUT 0x79
+ MX7D_PAD_ECSPI2_MOSI__GPIO4_IO21 0x4
>;
};
@@ -525,6 +526,7 @@
pinctrl_pwm4: pwm4-grp {
fsl,pins = <
MX7D_PAD_GPIO1_IO11__PWM4_OUT 0x79
+ MX7D_PAD_ECSPI2_SCLK__GPIO4_IO20 0x4
>;
};
--
2.15.1
next prev parent reply other threads:[~2017-12-06 15:29 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-12-06 15:29 [PATCH 1/9] ARM: dts: imx7-colibri: move and rename USB Host power regulator Stefan Agner
2017-12-06 15:29 ` Stefan Agner [this message]
[not found] ` <20171206153005.6144-2-stefan-XLVq0VzYD2Y@public.gmane.org>
2017-12-16 14:01 ` [PATCH 2/9] ARM: dts: imx7-colibri: make sure multiplexed pins are not active Fabio Estevam
[not found] ` <CAOMZO5AD6bDEMStEWY8hRG_8gh0RAD_66zboTsKd-cFkPtiLKg-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2017-12-17 20:02 ` Stefan Agner
2017-12-06 15:29 ` [PATCH 3/9] ARM: dts: imx7-colibri: mux pull-ups where appropriate Stefan Agner
[not found] ` <20171206153005.6144-3-stefan-XLVq0VzYD2Y@public.gmane.org>
2017-12-16 14:02 ` Fabio Estevam
2017-12-06 15:30 ` [PATCH 4/9] ARM: dts: imx7-colibri: use NAND_CE1 as GPIO Stefan Agner
[not found] ` <20171206153005.6144-4-stefan-XLVq0VzYD2Y@public.gmane.org>
2017-12-16 14:02 ` Fabio Estevam
2017-12-06 15:30 ` [PATCH 5/9] ARM: dts: imx7-colibri: specify cpu-supply Stefan Agner
[not found] ` <20171206153005.6144-5-stefan-XLVq0VzYD2Y@public.gmane.org>
2017-12-16 13:59 ` Fabio Estevam
2017-12-06 15:30 ` [PATCH 7/9] ARM: dts: imx7-colibri: specify backlight GPIO Stefan Agner
[not found] ` <20171206153005.6144-7-stefan-XLVq0VzYD2Y@public.gmane.org>
2017-12-16 14:03 ` Fabio Estevam
2017-12-06 15:30 ` [PATCH 8/9] ARM: dts: imx7-colibri: add MCP2515 CAN controller Stefan Agner
2017-12-07 8:59 ` Stefan Agner
[not found] ` <20171206153005.6144-8-stefan-XLVq0VzYD2Y@public.gmane.org>
2017-12-16 14:05 ` Fabio Estevam
2017-12-06 15:30 ` [PATCH 9/9] ARM: dts: imx7: add Toradex Colibri iMX7D 1GB (eMMC) support Stefan Agner
[not found] ` <20171206153005.6144-9-stefan-XLVq0VzYD2Y@public.gmane.org>
2017-12-16 14:09 ` Fabio Estevam
[not found] ` <CAOMZO5Dv5dRbbHeqMtitXaHjJbMF4nGQWg0dpyHu0hh+2TaxGA-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2017-12-16 14:18 ` Philippe Ombredanne
[not found] ` <20171206153005.6144-1-stefan-XLVq0VzYD2Y@public.gmane.org>
2017-12-06 15:30 ` [PATCH 6/9] ARM: dts: imx7-colibri: specify usdhc1 supplies Stefan Agner
[not found] ` <20171206153005.6144-6-stefan-XLVq0VzYD2Y@public.gmane.org>
2017-12-16 14:03 ` Fabio Estevam
2017-12-16 14:00 ` [PATCH 1/9] ARM: dts: imx7-colibri: move and rename USB Host power regulator Fabio Estevam
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20171206153005.6144-2-stefan@agner.ch \
--to=stefan@agner.ch \
--cc=devicetree@vger.kernel.org \
--cc=fabio.estevam@nxp.com \
--cc=kernel@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=robh+dt@kernel.org \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).